Dual Battery Isolators (3)

Overview Battery Isolator 12V 100A REDARC Dual Sensing The REDARC Smart Start® SBI12D is a microprocessor-controlled battery isolator used in a dual battery system. It is designed to be used in dual battery systems as a solenoid priority system to protect the start battery from excessive discharge. The SBI12D provides 12 volt DC incorporating 100A of continuous ratings. Dual Sensing The dual-sensing model is used to isolate the start and auxiliary batteries in a system where the auxiliary battery may also be charged by an external source such as Solar panels or an external AC battery charger. The SBI12D also allows the start battery to be charged by the external source once the auxiliary battery reaches 13.2 volts. This is useful to top up the start battery. Power Saving Technology The Smart Start SBI12D incorporates electronic components that will prevent the solenoid from generating high voltage transients. It is better than a diode battery isolator due to the voltage drop associated with diode type isolation. It features sophisticated fault detection and LED indication of operation to warn the user of faults including over-voltage, voltage drop, and excessive current draw conditions. Used primarily in 4WD and commercial vehicles, the Smart Start SBI is a safe way to charge an auxiliary battery and should often be installed with a high-quality fuse kit.  Features Overmould design Compact in size and easy to install Silver contacts for longer life and suitable for marine applications Power-saving technology Fault indication Fully surge protected Specifications Input (Operating) Voltage 12VDC Output Current Rating (Cont.) 100A Input Fuse Rating 100A Output Fuse Rating 100A Warranty 2 Years Length (mm) 80 Width (mm) 75 Height (mm) 63 Weight (kg) 0.2 Type Approval CE  

Battery Isolator 12V 100A REDARC SBI12. The REDARC Smart Start® SBI2 is a microprocessor-controlled battery isolator used in dual battery systems as a solenoid priority system. It will protect the start battery from excessive discharge, whilst allowing the auxiliary battery to supply non-essential loads. The Battery Isolator 12V 100A REDARC SBI12 DC incorporating 100A of continuous ratings.   Power Saving Technology The battery isolator is primarily used in 4WD and commercial vehicles and incorporates electronic components that will prevent the solenoid from generating high voltage transients. It is better than a diode battery isolator due to the voltage drop associated with diode type isolation. It features a low standby current draw and sophisticated fault detection and LED indication of operation to warn the user of faults including over-voltage, voltage drop, and excessive current draw conditions. The Smart Start SBI12 battery isolator is a safe way to charge a dual battery system and should often be installed with a high quality fuse kit.   Features Overmould design Compact in size and easy to install Silver contacts for longer life and suitable for marine applications Power-saving technology Fault indication Fully surge protected

The Battery Isolator 200 Amp 12V REDARC. REDARC Smart Start® SBI212D is a microprocessor-controlled dual battery isolator used in a dual battery system. It is designed to be used as a solenoid priority system to protect the start battery from excessive discharge while allowing the auxiliary battery to supply non-essential loads. The SBI212D Battery Isolator 200 Amp 12V REDARC  provides 12 volt DC incorporating 200A of continuous ratings and is designed for extremely heavy-duty operations. Dual Sensing The dual-sensing model has the added feature of allowing charge both ways where the auxiliary battery may also be charged by an external source such as Solar panels or an external AC battery charger. The SBI212D will also allow the start battery to be charged by the external source once the auxiliary battery reaches 13.2 volts to help top up the start battery. Power Saving Technology The Smart Start SBI212D Battery Isolator 200 Amp 12V REDARC  incorporates electronic components that will prevent the solenoid from generating high voltage transients. It is better than a diode battery isolator due to the voltage drop associated with diode type isolation. It features sophisticated fault detection and LED indication of operation to warn the user of faults including over-voltage, voltage drop and excessive current draw conditions. Used primarily in 4WD and commercial vehicles, the Smart Start SBI is a safe way to charge an auxiliary battery and should often be installed with a high quality fuse kit. Features Overmould design Compact in size and easy to install Silver contacts for longer life and suitable for marine applications Power saving technology Fault indication Fully surge protected Specifications Input (Operating) Voltage 12VDC Output Current Rating (Cont.) 200A Input Fuse Rating 200A Output Fuse Rating 200A Warranty 2 Years Length (mm) 100 Width (mm) 95 Height (mm) 90 Weight (kg) 0.6 Type Approval CE