{"product_id":"a5411786-mahle-alternator-12v-70a","title":"Mahle Alternator 12V 70A MG220, Single Leg, Internal Regulator","description":"\u003cp\u003eThe Mahle Alternator MG220 is a new 12V, 70A unit with a single leg mount and internal regulator. It is supplied without a belt pulley and is noted as a dust proof alternator for counter clockwise application.\u003c\/p\u003e\n\u003cp\u003eKey dimensions on this alternator include a 17mm shaft diameter, 56mm mount leg thickness, 86.0 mounting points diameter, 166mm mount centre to centre, and 8mm adjusting and pivot hole diameters. Those measurements matter when you are matching brackets, mounting points, and drive layout.\u003c\/p\u003e\n\u003cp\u003eThis unit is sold as each, carries a one year warranty, and is identified as Mahle part number MG220. The alternator is listed as Mahle unit make, with a 70 amp charge current and internal regulation for applications that use that style of charging system.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e12V alternator with 70A output\u003c\/li\u003e\n\u003cli\u003eNew unit, not remanufactured\u003c\/li\u003e\n\u003cli\u003eSingle leg alternator mount\u003c\/li\u003e\n\u003cli\u003eInternal regulator\u003c\/li\u003e\n\u003cli\u003eSupplied without belt pulley\u003c\/li\u003e\n\u003cli\u003eDust proof design\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePart No.: MG220\u003c\/li\u003e\n\u003cli\u003eBrand: Mahle\u003c\/li\u003e\n\u003cli\u003eType: Alternator\u003c\/li\u003e\n\u003cli\u003eVoltage: 12V\u003c\/li\u003e\n\u003cli\u003ePower rating: 70A\u003c\/li\u003e\n\u003cli\u003eAlternator charge current: 70A\u003c\/li\u003e\n\u003cli\u003eRegulator type: Internal\u003c\/li\u003e\n\u003cli\u003eMount leg thickness: 56mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment guidance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eListed application families include Fendt Farmer and Same Antares.\u003c\/li\u003e\n\u003cli\u003eSample fitment references include Fendt Farmer 1980 and Same Antares 1989, 1990, 1991, 1992, 1993, 1994, and 1995.\u003c\/li\u003e\n\u003cli\u003eUse the part number MG220 and the mounting measurements to confirm the alternator matches your existing unit before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication and Buying Notes\u003c\/h3\u003e\n\u003cp\u003eThis alternator is a 12V, 70A Mahle unit with an internal regulator, so the first checks should be system voltage, output requirement, and regulator style. If your existing alternator uses a different voltage, external regulation, or a different pulley arrangement, do not assume this unit will be a direct swap.\u003c\/p\u003e\n\u003cp\u003eThe physical mounting details are just as important as the electrical rating. The listed 56mm mount leg thickness, 86.0 mounting points diameter, 166mm mount centre to centre, and 8mm adjusting and pivot holes should be compared against the unit being replaced. A mismatch in these dimensions can prevent correct installation even when the alternator output looks suitable.\u003c\/p\u003e\n\u003cp\u003eBecause this alternator is supplied without a belt pulley, you need to confirm whether your current pulley transfers across, and whether your belt drive setup suits a counter clockwise application. The 17mm shaft diameter is another key point to check, as pulley fitment depends on matching shaft size as well as the required offset and drive layout.\u003c\/p\u003e\n\u003cp\u003eThe note describing it as dust proof is useful in understanding the design intent, but it should still be matched carefully to the vehicle or equipment application. The safest buying approach is to compare MG220 against the original alternator details, then confirm the application family and mounting pattern before finalising the order.\u003c\/p\u003e\n\u003cp\u003eBefore supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.\u003c\/p\u003e\n\u003cp\u003eFor workshop, fleet, and equipment applications, accurate identification of part number MG220 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.\u003c\/p\u003e\n\u003cp\u003eRelevant published details for this unit include Type ALTERNATOR, Unit of Measure EACH, Warranty One Year, Mount Leg Thickness 56mm, Power Rating (Amp) 70, Shaft Diameter 17mm, Voltage 12, Alternator Mount Single Leg, New \/ Reman. New, Pulleys without belt pulley.\u003c\/p\u003e\n\u003cp\u003eAdditional published details for cross-checking include Mounting points diameter 86.0, Packaging width 18.60, Net Weight 5289, Product Group 1 ROTATING ELECTRICAL, Part No. MG220, Brand MAHLE, Description Mahle Alternator 12V 70A, Adjusting Hole Diameter 8, Pivot Hole Diameter 8, Regulator Type Internal.\u003c\/p\u003e\n\u003cp\u003eMahle Alternator 12V 70A. Part number MG220 should be checked first. Listed voltage is 12. Listed output rating is 70. These details form the core reference points used by parts interpreters when confirming the correct replacement.\u003c\/p\u003e\n\u003cp\u003eMount style is Single Leg. Regulator type is Internal. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.\u003c\/p\u003e\n\u003cp\u003eFor part number MG220, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.\u003c\/p\u003e\n\u003cp\u003eFor a alternator in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 and output 70 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility note:\u003c\/strong\u003e Please confirm fitment using part number MG220, the 12V 70A specification, the single leg mount, and the listed mounting dimensions before purchase. Application references are provided for guidance only, and final compatibility should be checked against your existing alternator and vehicle or equipment setup.\u003c\/p\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003ch4\u003eWhat is the part number for this Mahle alternator?\u003c\/h4\u003e\n\u003cp\u003eThe part number is MG220. For this listing, part number MG220 is the main reference point. Listed voltage is 12. Listed output rating is 70. Published fitment references include FENDT FARMER, FENDT FARMER 1980, SAME ANTARES. These details should still be checked against the original unit before ordering.\u003c\/p\u003e\n\u003ch4\u003eIs this alternator new or remanufactured?\u003c\/h4\u003e\n\u003cp\u003eIt is listed as new. For this listing, part number MG220 is the main reference point. Listed voltage is 12. Listed output rating is 70. Published fitment references include FENDT FARMER, FENDT FARMER 1980, SAME ANTARES. These details should still be checked against the original unit before ordering.\u003c\/p\u003e\n\u003ch4\u003eWhat voltage and output does it have?\u003c\/h4\u003e\n\u003cp\u003eIt is a 12V alternator with a 70A power rating and 70A charge current. For this listing, part number MG220 is the main reference point. Listed voltage is 12. Listed output rating is 70. Published fitment references include FENDT FARMER, FENDT FARMER 1980, SAME ANTARES. These details should still be checked against the original unit before ordering.\u003c\/p\u003e\n\u003ch4\u003eDoes it come with a pulley?\u003c\/h4\u003e\n\u003cp\u003eNo. It is supplied without a belt pulley. For this listing, part number MG220 is the main reference point. Listed voltage is 12. Listed output rating is 70. Published fitment references include FENDT FARMER, FENDT FARMER 1980, SAME ANTARES. These details should still be checked against the original unit before ordering.\u003c\/p\u003e\n\u003ch4\u003eWhat regulator type does it use?\u003c\/h4\u003e\n\u003cp\u003eIt has an internal regulator. For this listing, part number MG220 is the main reference point. Listed voltage is 12. Listed output rating is 70. Published fitment references include FENDT FARMER, FENDT FARMER 1980, SAME ANTARES. These details should still be checked against the original unit before ordering.\u003c\/p\u003e\n\u003ch4\u003eWhat fitment references are listed?\u003c\/h4\u003e\n\u003cp\u003eListed application families include Fendt Farmer and Same Antares, with sample references including Fendt Farmer 1980 and Same Antares 1989 through 1995. For this listing, part number MG220 is the main reference point. Listed voltage is 12. Listed output rating is 70. Published fitment references include FENDT FARMER, FENDT FARMER 1980, SAME ANTARES. These details should still be checked against the original unit before ordering.\u003c\/p\u003e","brand":"MAHLE","offers":[{"title":"Default Title","offer_id":56888759746720,"sku":"A5411786","price":803.4,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/5058\/0875\/files\/8WNK63neFgkY3GrV8sqc_w.jpg?v=1775122623","url":"https:\/\/www.micksgonebush.com.au\/products\/a5411786-mahle-alternator-12v-70a","provider":"Micks Gone Bush","version":"1.0","type":"link"}