{"product_id":"a5411805-mahle-starter-motor-12v-9th-cw","title":"Mahle Starter Motor 12V 9 Tooth CW MS263","description":"\u003cp\u003eThe Mahle MS263 is a new 12V starter motor with 9 teeth and clockwise rotation, supplied as a 3-hole starter motor with an insulated return. It is listed with a 2.7kW power rating, 127mm mount centres A, 90mm mount centres C, and a 48mm pinion at rest.\u003c\/p\u003e\n\u003cp\u003eThis unit carries part number MS263 and is identified as a Mahle starter motor with a 34.8mm pinion diameter, 89mm flange diameter, 11mm mount hole diameter, and an overall length of 330mm. Those dimensions are the key checks when comparing against the existing starter or the engine application.\u003c\/p\u003e\n\u003cp\u003eThe starter is specified for dry clutch use and has 3 mounting bores. It is backed by a one year warranty and is described as new, not remanufactured, which matters if you are matching a replacement against an existing electrical and mechanical setup.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e12V starter motor\u003c\/li\u003e\n\u003cli\u003e9 tooth pinion\u003c\/li\u003e\n\u003cli\u003eClockwise rotation\u003c\/li\u003e\n\u003cli\u003e3-hole starter mount\u003c\/li\u003e\n\u003cli\u003eInsulated return\u003c\/li\u003e\n\u003cli\u003eNew unit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Mahle\u003c\/li\u003e\n\u003cli\u003ePart number: MS263\u003c\/li\u003e\n\u003cli\u003eType: Starter motor\u003c\/li\u003e\n\u003cli\u003eVoltage: 12V\u003c\/li\u003e\n\u003cli\u003ePower rating: 2.7kW\u003c\/li\u003e\n\u003cli\u003eRotation: CW\u003c\/li\u003e\n\u003cli\u003eNumber of teeth: 9\u003c\/li\u003e\n\u003cli\u003eStarter mount type: 3 hole\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKnown application references\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePeugeot XDP4.90\u003c\/li\u003e\n\u003cli\u003ePrincess P42\u003c\/li\u003e\n\u003cli\u003eVolvo Construction EC130C\u003c\/li\u003e\n\u003cli\u003eVolvo Construction EC150C\u003c\/li\u003e\n\u003cli\u003eVolvo Construction EC160\u003c\/li\u003e\n\u003cli\u003eVolvo Construction L50C\u003c\/li\u003e\n\u003cli\u003eVolvo Marine\/Penta AQAD30A\u003c\/li\u003e\n\u003cli\u003eVolvo Marine\/Penta AQD21\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication and Buying Notes\u003c\/h3\u003e\n\u003cp\u003eBefore ordering, compare the part number MS263, the 12V electrical setup, and the physical mounting details against the removed unit. The important measurements here are the 127mm mount centres A, 90mm mount centres B and C, 89mm flange diameter, 11mm mount hole diameter, and 330mm overall length.\u003c\/p\u003e\n\u003cp\u003eThe starter is a 9 tooth, clockwise unit with a 34.8mm pinion diameter and 48mm pinion at rest. Those figures matter because starter drive engagement, flywheel depth, and mounting pattern need to line up with the engine application for the unit to suit properly.\u003c\/p\u003e\n\u003cp\u003eThis starter is listed with known application references across Peugeot, Princess, Volvo Construction, and Volvo Marine\/Penta variants, but application naming alone is not enough to confirm fitment. Use the part number and the measurements together, especially where the application has multiple variants or model years.\u003c\/p\u003e\n\u003cp\u003eThe listed features include resistance to salt, fog, humidity, water, dust, mud, vibration, extreme temperatures, and aggressive liquids, plus compliance with EMC and related international directives and standards. Those are useful durability points, but they do not replace a fitment check against the engine and starter mounting setup.\u003c\/p\u003e\n\u003cp\u003eIf you are replacing a marine or construction starter, take extra care with the application reference, as the same family names can cover different engine or equipment versions. Matching the part number MS263 and the dimensional data is the safest way to verify the replacement before purchase.\u003c\/p\u003e\n\u003cp\u003eBefore supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.\u003c\/p\u003e\n\u003cp\u003eFor workshop, fleet, and equipment applications, accurate identification of part number MS263 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.\u003c\/p\u003e\n\u003cp\u003eRelevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty One Year, Mount Centres A 127mm, Mount Centres C 90mm, Number of Teeth 9, Pinion at Rest 48mm, Power Rating 2.7kW, Suits Unit Make Mahle, Note Insulated Return.\u003c\/p\u003e\n\u003cp\u003eAdditional published details for cross-checking include New \/ Reman. New, Wet \/ Dry Clutch Dry, Number of mounting bores 3, For flywheel depth 51.0, Packaging length 38.2, Packaging height 14.50, Product Group 2 STARTER MOTORS, Part No. MS263, Brand MAHLE.\u003c\/p\u003e\n\u003cp\u003eMahle Starter Motor 12V 9Th CW. Part number MS263 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.\u003c\/p\u003e\n\u003cp\u003eFor part number MS263, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.\u003c\/p\u003e\n\u003cp\u003eFor a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility note:\u003c\/strong\u003e Confirm compatibility by checking part number MS263, the 12V clockwise 9 tooth configuration, and the mounting and dimension details against the existing starter and application before ordering.\u003c\/p\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003ch4\u003eWhat is the part number for this starter motor?\u003c\/h4\u003e\n\u003cp\u003eThe part number is MS263. For this listing, part number MS263 is the main reference point. Listed voltage is 12. Published fitment references include PEUGEOT XDP4.90, PEUGEOT XDP4.90 1980, PRINCESS P42. These details should still be checked against the original unit before ordering.\u003c\/p\u003e\n\u003ch4\u003eIs this a 12 volt starter motor?\u003c\/h4\u003e\n\u003cp\u003eYes. The listed voltage is 12V. For this listing, part number MS263 is the main reference point. Listed voltage is 12. Published fitment references include PEUGEOT XDP4.90, PEUGEOT XDP4.90 1980, PRINCESS P42. These details should still be checked against the original unit before ordering.\u003c\/p\u003e\n\u003ch4\u003eHow many teeth does the pinion have?\u003c\/h4\u003e\n\u003cp\u003eIt has 9 teeth. For this listing, part number MS263 is the main reference point. Listed voltage is 12. Published fitment references include PEUGEOT XDP4.90, PEUGEOT XDP4.90 1980, PRINCESS P42. These details should still be checked against the original unit before ordering.\u003c\/p\u003e\n\u003ch4\u003eWhat is the rotation direction?\u003c\/h4\u003e\n\u003cp\u003eThe starter motor is clockwise, shown as CW. For this listing, part number MS263 is the main reference point. Listed voltage is 12. Published fitment references include PEUGEOT XDP4.90, PEUGEOT XDP4.90 1980, PRINCESS P42. These details should still be checked against the original unit before ordering.\u003c\/p\u003e\n\u003ch4\u003eIs this unit new or remanufactured?\u003c\/h4\u003e\n\u003cp\u003eIt is listed as new. For this listing, part number MS263 is the main reference point. Listed voltage is 12. Published fitment references include PEUGEOT XDP4.90, PEUGEOT XDP4.90 1980, PRINCESS P42. These details should still be checked against the original unit before ordering.\u003c\/p\u003e\n\u003ch4\u003eWhat applications are referenced for this starter?\u003c\/h4\u003e\n\u003cp\u003eKnown application references include Peugeot XDP4.90, Princess P42, Volvo Construction EC130C, EC150C, EC160 and L50C, plus multiple Volvo Marine\/Penta engines such as AQAD30A, AQD21, AQD32A, AQD40A, AQD41, AQD41A, MD21, MD21M3S, MD30A, MD32, MD5C, TAMD30A, TAMD31, TAMD31L and TAMD31M. For this listing, part number MS263 is the main reference point. Listed voltage is 12. Published fitment references include PEUGEOT XDP4.90, PEUGEOT XDP4.90 1980, PRINCESS P42. These details should still be checked against the original unit before ordering.\u003c\/p\u003e","brand":"MAHLE","offers":[{"title":"Default Title","offer_id":56888930697376,"sku":"A5411805","price":1423.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/5058\/0875\/files\/H9oFORoLCR22gRBkKnnLmw.jpg?v=1775125159","url":"https:\/\/www.micksgonebush.com.au\/products\/a5411805-mahle-starter-motor-12v-9th-cw","provider":"Micks Gone Bush","version":"1.0","type":"link"}