{"product_id":"a5411819-mahle-starter-motor-12v-9th-cw","title":"Mahle Starter Motor 12V 9 Tooth CW MS271","description":"\u003cp\u003eThe Mahle MS271 is a new 12V starter motor with 9 teeth and clockwise rotation. It is listed as a starter motor for dry clutch applications, with a 3.1kW power rating, overall length of 334mm, and a 37mm pinion diameter.\u003c\/p\u003e\n\u003cp\u003eKey mounting and dimensional details include 127mm mount centres A, 90mm mount centres B, 90mm mount centres C, a 89mm flange diameter, and 11.5mm mount hole diameter. The pinion at rest is 48mm, and the connecting angle is 45.0 degrees.\u003c\/p\u003e\n\u003cp\u003eThis unit is described as an off set drive end bracket, oil sealed design. It is sold as each, carries part number MS271, and is backed by a one year warranty.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e12V starter motor\u003c\/li\u003e\n\u003cli\u003e9 tooth pinion\u003c\/li\u003e\n\u003cli\u003eClockwise rotation\u003c\/li\u003e\n\u003cli\u003e3.1kW power rating\u003c\/li\u003e\n\u003cli\u003eNew unit\u003c\/li\u003e\n\u003cli\u003eOil sealed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Mahle\u003c\/li\u003e\n\u003cli\u003ePart number: MS271\u003c\/li\u003e\n\u003cli\u003eItem type: Starter Motor\u003c\/li\u003e\n\u003cli\u003eVoltage: 12V\u003c\/li\u003e\n\u003cli\u003eRotation: CW\u003c\/li\u003e\n\u003cli\u003eNumber of teeth: 9\u003c\/li\u003e\n\u003cli\u003ePower rating: 3.1kW\u003c\/li\u003e\n\u003cli\u003eOverall length: 334mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment guidance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCASE 6000 series applications are listed in the supplied fitment data, including model-year entries from 1984 through 1992.\u003c\/li\u003e\n\u003cli\u003eCASE 6500 applications are listed in the supplied fitment data, including 1984.\u003c\/li\u003e\n\u003cli\u003eCASE W602D is listed in the supplied fitment data.\u003c\/li\u003e\n\u003cli\u003eInternational Harvester Maxxum applications are listed in the supplied fitment data, including model-year entries from 1988 through 1997.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication and Buying Notes\u003c\/h3\u003e\n\u003cp\u003eConfirm the starter motor part number MS271 before ordering, then compare the 12V system, 9 tooth pinion, and clockwise rotation against the original unit. The mounting pattern matters as much as the electrical details, so check the 127mm mount centres A, 90mm mount centres B and C, and the 11.5mm mount hole diameter against the vehicle now fitted.\u003c\/p\u003e\n\u003cp\u003eThe 3.1kW power rating, 89mm flange diameter, 334mm overall length, and 37mm pinion diameter are useful checks when comparing a replacement starter to the one removed from the machine. The unit is described as a dry clutch starter motor with an offset drive end bracket and oil sealed construction, so it should be matched carefully to the intended application.\u003c\/p\u003e\n\u003cp\u003eThe fitment information supplied includes CASE 6000, CASE 6500, CASE W602D, and International Harvester Maxxum applications, but model years and exact application details still need to be checked against the vehicle or machine being repaired. Starter motors can share similar shapes and still differ in rotation, tooth count, mounting, or pinion position, so the safest approach is to verify every key measurement before purchase.\u003c\/p\u003e\n\u003cp\u003eIf you are cross-referencing a replacement, the most useful identifiers are MAHLE, MS271, 12V, 9 tooth, CW rotation, and the measured mounting points. The one year warranty applies to the listed item, but it does not replace the need to confirm the correct application for the vehicle or equipment.\u003c\/p\u003e\n\u003cp\u003eBefore supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.\u003c\/p\u003e\n\u003cp\u003eFor workshop, fleet, and equipment applications, accurate identification of part number MS271 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.\u003c\/p\u003e\n\u003cp\u003eRelevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty One Year, Mount Centres A 127mm, Mount Centres C 90mm, Number of Teeth 9, Pinion at Rest 48mm, Power Rating 3.1kW, Suits Unit Make Mahle, Note Off set drive end bracket. Oil sealed.\u003c\/p\u003e\n\u003cp\u003eAdditional published details for cross-checking include New \/ Reman. New, Wet \/ Dry Clutch Dry, Bore O 1 11.5, Tooth Pitch 15.55, Connecting Angle [Degree] 45.0, Packaging length 38.2, Packaging height 14.50, Product Group 2 STARTER MOTORS, Part No. MS271.\u003c\/p\u003e\n\u003cp\u003eMahle Starter Motor 12V 9Th CW. Part number MS271 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.\u003c\/p\u003e\n\u003cp\u003eFor part number MS271, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.\u003c\/p\u003e\n\u003cp\u003eFor a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.\u003c\/p\u003e\n\u003cp\u003eAvailable application references include CASE 6000, CASE 6000 1984, CASE 6000 1985, CASE 6000 1986, INTERNATIONAL HARVESTER MAXXUM, INTERNATIONAL HARVESTER MAXXUM 1988. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility note:\u003c\/strong\u003e Please confirm compatibility by matching part number MS271 and comparing the listed voltage, rotation, tooth count, mounting dimensions, pinion size, and application details to the original starter motor or the vehicle records before ordering.\u003c\/p\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003ch4\u003eWhat is the part number for this starter motor?\u003c\/h4\u003e\n\u003cp\u003eThe part number listed is MS271. For this listing, part number MS271 is the main reference point. Listed voltage is 12. Published fitment references include CASE 6000, CASE 6000 1984, CASE 6000 1985. These details should still be checked against the original unit before ordering.\u003c\/p\u003e\n\u003ch4\u003eWhat voltage is this starter motor?\u003c\/h4\u003e\n\u003cp\u003eIt is a 12V starter motor. For this listing, part number MS271 is the main reference point. Listed voltage is 12. Published fitment references include CASE 6000, CASE 6000 1984, CASE 6000 1985. These details should still be checked against the original unit before ordering.\u003c\/p\u003e\n\u003ch4\u003eHow many teeth does the pinion have?\u003c\/h4\u003e\n\u003cp\u003eThe pinion has 9 teeth. For this listing, part number MS271 is the main reference point. Listed voltage is 12. Published fitment references include CASE 6000, CASE 6000 1984, CASE 6000 1985. These details should still be checked against the original unit before ordering.\u003c\/p\u003e\n\u003ch4\u003eWhat rotation does this starter motor use?\u003c\/h4\u003e\n\u003cp\u003eIt is clockwise rotation, listed as CW. For this listing, part number MS271 is the main reference point. Listed voltage is 12. Published fitment references include CASE 6000, CASE 6000 1984, CASE 6000 1985. These details should still be checked against the original unit before ordering.\u003c\/p\u003e\n\u003ch4\u003eWhat fitment information is supplied?\u003c\/h4\u003e\n\u003cp\u003eThe supplied fitment data includes CASE 6000, CASE 6500, CASE W602D, and International Harvester Maxxum applications, with several model-year entries noted for CASE 6000 and Maxxum. For this listing, part number MS271 is the main reference point. Listed voltage is 12. Published fitment references include CASE 6000, CASE 6000 1984, CASE 6000 1985. These details should still be checked against the original unit before ordering.\u003c\/p\u003e\n\u003ch4\u003eWhat warranty is listed?\u003c\/h4\u003e\n\u003cp\u003eThe listed warranty is one year. For this listing, part number MS271 is the main reference point. Listed voltage is 12. Published fitment references include CASE 6000, CASE 6000 1984, CASE 6000 1985. These details should still be checked against the original unit before ordering.\u003c\/p\u003e","brand":"MAHLE","offers":[{"title":"Default Title","offer_id":56888929910944,"sku":"A5411819","price":1333.8,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/5058\/0875\/files\/ab_8394KTWk6ZWkVX3BMuw.jpg?v=1775125145","url":"https:\/\/www.micksgonebush.com.au\/products\/a5411819-mahle-starter-motor-12v-9th-cw","provider":"Micks Gone Bush","version":"1.0","type":"link"}