{"product_id":"a5411852-mahle-starter-motor-24v-9th-cw","title":"Mahle Starter Motor 24V 9T CW MS241","description":"\u003cp\u003eThis Mahle starter motor is a new 24V unit with 9 teeth, clockwise rotation, and a 2.5kW power rating. It is listed under part number MS241 and is supplied as a 2-hole starter motor with a one year warranty.\u003c\/p\u003e\n\u003cp\u003eKey physical points include a 111mm mount centres measurement, 74mm flange diameter, 232mm overall length, and 29mm pinion diameter. The unit also notes an offset drive end bracket and a reduction gear transmission type, which are important checks when comparing against the original starter.\u003c\/p\u003e\n\u003cp\u003eThe starter is identified as a Mahle unit and is noted for JCB applications with the 404D-22 engine. Fitment is specific and should be confirmed against the part number, mounting arrangement, flywheel depth, and the original starter details before ordering.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e24V starter motor\u003c\/li\u003e\n\u003cli\u003e9 tooth pinion\u003c\/li\u003e\n\u003cli\u003eClockwise rotation\u003c\/li\u003e\n\u003cli\u003e2-hole starter mount\u003c\/li\u003e\n\u003cli\u003eReduction gear type\u003c\/li\u003e\n\u003cli\u003eNew unit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Mahle\u003c\/li\u003e\n\u003cli\u003ePart number: MS241\u003c\/li\u003e\n\u003cli\u003eProduct type: Starter motor\u003c\/li\u003e\n\u003cli\u003eVoltage: 24V\u003c\/li\u003e\n\u003cli\u003ePower rating: 2.5kW\u003c\/li\u003e\n\u003cli\u003eNumber of teeth: 9\u003c\/li\u003e\n\u003cli\u003eRotation: CW\u003c\/li\u003e\n\u003cli\u003eStarter mount type: 2 hole\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJCB applications with 404D-22 engine\u003c\/li\u003e\n\u003cli\u003eJCB 135\u003c\/li\u003e\n\u003cli\u003eJCB 135 2012\u003c\/li\u003e\n\u003cli\u003eJCB 150T\u003c\/li\u003e\n\u003cli\u003eJCB 150T 2012\u003c\/li\u003e\n\u003cli\u003eJCB 155\u003c\/li\u003e\n\u003cli\u003eJCB 155 2012\u003c\/li\u003e\n\u003cli\u003eJCB 155 2014\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication and Buying Notes\u003c\/h3\u003e\n\u003cp\u003eBefore buying, match the part number MS241 and compare the starter layout against your original unit. The important checks here are 24V voltage, 9 tooth pinion, clockwise rotation, and the 2-hole mounting arrangement with 111mm mount centres.\u003c\/p\u003e\n\u003cp\u003eThe listed fitment covers JCB applications with the 404D-22 engine, including models such as JCB 135, 150T, 155, 160, 170, 175, 180, 18Z-1, 190T, 1CX, 1CXT, 205, 205T, 48-Z1, 55Z-1, 65R-1, 8008CTS, 8040ZTS, 8045ZTS, 8055RTS, and 8055ZTS. Even with that application guidance, the correct starter still needs the original mounting and flywheel details checked.\u003c\/p\u003e\n\u003cp\u003eThe measurements matter. Overall length is 232mm, flange diameter is 74mm, pinion diameter is 29mm, pinion at rest is 21mm, and the for flywheel depth measurement is 24.0. These are the kinds of dimensions that can stop an otherwise similar starter from fitting correctly if they do not line up.\u003c\/p\u003e\n\u003cp\u003eThe note of an offset drive end bracket is also worth checking closely. If the old starter uses a different bracket arrangement, different mount centres, or a different pinion setup, it is safer to confirm those details first rather than relying on appearance alone.\u003c\/p\u003e\n\u003cp\u003eIf you are replacing a failed starter, compare the original unit’s label, mounting bores, and electrical system voltage before fitting. This model is a new Mahle starter motor, supplied each, with a one year warranty, so it is intended as a direct replacement only where the application and dimensions match.\u003c\/p\u003e\n\u003cp\u003eBefore supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.\u003c\/p\u003e\n\u003cp\u003eFor workshop, fleet, and equipment applications, accurate identification of part number MS241 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.\u003c\/p\u003e\n\u003cp\u003eRelevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty One Year, Mount Centres A 111mm, Number of Teeth 9, Pinion at Rest 21mm, Power Rating 2.5kW, Suits Unit Make Mahle, Note Off set drive end bracket., Starter Mount Type 2 Hole.\u003c\/p\u003e\n\u003cp\u003eAdditional published details for cross-checking include Transmission Type with reduction gear, Number of mounting bores 2, For flywheel depth 24.0, Mounting points diameter 115.0, Packaging width 16.60, Net Weight 4245, Product Group 1 ROTATING ELECTRICAL, Part No. MS241, Brand MAHLE, Description Mahle Starter Motor 24V 9Th CW.\u003c\/p\u003e\n\u003cp\u003eMahle Starter Motor 24V 9Th CW. Part number MS241 should be checked first. Listed voltage is 24. These details form the core reference points used by parts interpreters when confirming the correct replacement.\u003c\/p\u003e\n\u003cp\u003eFor part number MS241, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.\u003c\/p\u003e\n\u003cp\u003eFor a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 24 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility note:\u003c\/strong\u003e Please confirm fitment using part number MS241 and the application details listed for your machine. Starter motors need the correct voltage, rotation, tooth count, mount type, and flywheel depth to match the original unit.\u003c\/p\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003ch4\u003eWhat voltage is this starter motor?\u003c\/h4\u003e\n\u003cp\u003eIt is a 24V starter motor. For this listing, part number MS241 is the main reference point. Listed voltage is 24. Published fitment references include JCB 135, JCB 135 2012, JCB 150T. These details should still be checked against the original unit before ordering.\u003c\/p\u003e\n\u003ch4\u003eWhat is the part number?\u003c\/h4\u003e\n\u003cp\u003eThe part number is MS241. For this listing, part number MS241 is the main reference point. Listed voltage is 24. Published fitment references include JCB 135, JCB 135 2012, JCB 150T. These details should still be checked against the original unit before ordering.\u003c\/p\u003e\n\u003ch4\u003eHow many teeth does the pinion have?\u003c\/h4\u003e\n\u003cp\u003eThe starter has 9 teeth. For this listing, part number MS241 is the main reference point. Listed voltage is 24. Published fitment references include JCB 135, JCB 135 2012, JCB 150T. These details should still be checked against the original unit before ordering.\u003c\/p\u003e\n\u003ch4\u003eWhat rotation does it use?\u003c\/h4\u003e\n\u003cp\u003eIt is clockwise rotation, noted as CW. For this listing, part number MS241 is the main reference point. Listed voltage is 24. Published fitment references include JCB 135, JCB 135 2012, JCB 150T. These details should still be checked against the original unit before ordering.\u003c\/p\u003e\n\u003ch4\u003eWhat mounting arrangement does it have?\u003c\/h4\u003e\n\u003cp\u003eIt is a 2-hole starter mount with 2 mounting bores. For this listing, part number MS241 is the main reference point. Listed voltage is 24. Published fitment references include JCB 135, JCB 135 2012, JCB 150T. These details should still be checked against the original unit before ordering.\u003c\/p\u003e\n\u003ch4\u003eWhat vehicles or machines is it listed for?\u003c\/h4\u003e\n\u003cp\u003eIt is listed for JCB applications with the 404D-22 engine, including models such as JCB 135, 150T, 155, 160, 170, 175, 180, 18Z-1, 190T, 1CX, 1CXT, 205, 205T, 48-Z1, 55Z-1, 65R-1, 8008CTS, 8040ZTS, 8045ZTS, 8055RTS, and 8055ZTS. For this listing, part number MS241 is the main reference point. Listed voltage is 24. Published fitment references include JCB 135, JCB 135 2012, JCB 150T. These details should still be checked against the original unit before ordering.\u003c\/p\u003e","brand":"MAHLE","offers":[{"title":"Default Title","offer_id":56888928960672,"sku":"A5411852","price":1036.1,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/5058\/0875\/files\/yO0wAO4mWl1pbbKhFhllw.jpg?v=1775125123","url":"https:\/\/www.micksgonebush.com.au\/products\/a5411852-mahle-starter-motor-24v-9th-cw","provider":"Micks Gone Bush","version":"1.0","type":"link"}