{"product_id":"a5411859-mahle-starter-motor-12v-9th-cw","title":"Mahle Starter Motor 12V 9 Tooth CW MS404","description":"\u003cp\u003eThe MAHLE Starter Motor MS404 is a 12V starter motor with a 9 tooth pinion, clockwise rotation, and a 2kW power rating. It is listed as a new unit, supplied each, and uses a 2 hole starter mount type with 2 mounting bores and 105mm mount centres.\u003c\/p\u003e\n\u003cp\u003eKey physical checks include a 30mm pinion diameter, 21mm pinion at rest, 82mm flange diameter, and 10mm mount hole diameter. The unit is described as suitable for a dry clutch application and for a transmission type with reduction gear.\u003c\/p\u003e\n\u003cp\u003eThis starter is identified with part number MS404 and brand MAHLE. Where a replacement starter is being matched, the most important checks are voltage, tooth count, rotation, mount pattern, flange size, and flywheel depth, which is listed at 24.0.\u003c\/p\u003e\n\u003cp\u003eThe unit is covered by a one year warranty and is described within the rotating electrical product group. For workshop or trade buying, those core identifiers help confirm whether the starter on hand matches the vehicle application before installation begins.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e12V starter motor\u003c\/li\u003e\n\u003cli\u003e9 tooth pinion\u003c\/li\u003e\n\u003cli\u003eClockwise rotation\u003c\/li\u003e\n\u003cli\u003e2kW power rating\u003c\/li\u003e\n\u003cli\u003eNew unit\u003c\/li\u003e\n\u003cli\u003e2 hole starter mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: MAHLE\u003c\/li\u003e\n\u003cli\u003ePart No.: MS404\u003c\/li\u003e\n\u003cli\u003eProduct type: Starter Motor\u003c\/li\u003e\n\u003cli\u003eVoltage: 12V\u003c\/li\u003e\n\u003cli\u003eNumber of teeth: 9\u003c\/li\u003e\n\u003cli\u003eRotation: CW\u003c\/li\u003e\n\u003cli\u003ePower rating: 2kW\u003c\/li\u003e\n\u003cli\u003eStarter mount type: 2 hole\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication and Buying Notes\u003c\/h3\u003e\n\u003cp\u003eBefore ordering, match the part number MS404 and confirm the starter details against the original unit or vehicle application. The critical checks here are 12V, 9 tooth, clockwise rotation, 2 hole mounting, and 105mm mount centres, because those are the details that usually determine whether the starter will physically and electrically suit the job.\u003c\/p\u003e\n\u003cp\u003eThe flange diameter is 82mm and the mount hole diameter is 10mm, so the mounting face should be checked carefully against the vehicle side and any removed starter. The listed pinion diameter is 30mm with a pinion at rest measurement of 21mm, and the flywheel depth is 24.0, which are useful measurements when comparing replacement starters that look similar but are not interchangeable.\u003c\/p\u003e\n\u003cp\u003eThis starter is described as a dry clutch unit for a transmission with reduction gear, so it should be matched to the correct application rather than chosen on tooth count alone. Even when the external shape looks close, differences in mount centres, rotation, pinion position, or flywheel depth can prevent correct engagement.\u003c\/p\u003e\n\u003cp\u003eThe unit is new and carries a one year warranty, but that does not replace the need to confirm compatibility before fitting. As with any starter motor, the safest approach is to compare the old part, the vehicle application details, and the listed dimensions together, especially where the vehicle has had previous repairs or non-standard components fitted.\u003c\/p\u003e\n\u003cp\u003eBefore supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.\u003c\/p\u003e\n\u003cp\u003eFor workshop, fleet, and equipment applications, accurate identification of part number MS404 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.\u003c\/p\u003e\n\u003cp\u003eRelevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty One Year, Mount Centres A 105mm, Number of Teeth 9, Pinion Diameter 30mm, Rotation CW, Voltage 12, New \/ Reman. New, Wet \/ Dry Clutch Dry.\u003c\/p\u003e\n\u003cp\u003eAdditional published details for cross-checking include Bore O 1 10.3, Tooth Pitch 12.35, Mounting points diameter 105.0, Packaging width 16.60, Net Weight 4064, Product Group 1 ROTATING ELECTRICAL, Part No. MS404, Brand MAHLE, Description Mahle Starter Motor 12V 9Th CW, Flange Diameter 82mm.\u003c\/p\u003e\n\u003cp\u003eMahle Starter Motor 12V 9Th CW. Part number MS404 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.\u003c\/p\u003e\n\u003cp\u003eFor part number MS404, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.\u003c\/p\u003e\n\u003cp\u003eFor a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.\u003c\/p\u003e\n\u003cp\u003eWhere no verified application list is available, the part number, mounting details, connector style, and published specifications should be used as the primary selection criteria.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility note:\u003c\/strong\u003e Confirm fitment by checking part number MS404, 12V specification, 9 tooth clockwise configuration, 2 hole mount pattern, 105mm mount centres, and the listed flange, pinion, and flywheel depth measurements against the vehicle and the removed starter motor.\u003c\/p\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003ch4\u003eWhat is the part number for this MAHLE starter motor?\u003c\/h4\u003e\n\u003cp\u003eThe part number listed is MS404. For this listing, part number MS404 is the main reference point. Listed voltage is 12. These details should still be checked against the original unit before ordering.\u003c\/p\u003e\n\u003ch4\u003eWhat voltage is this starter motor?\u003c\/h4\u003e\n\u003cp\u003eIt is a 12V starter motor. For this listing, part number MS404 is the main reference point. Listed voltage is 12. These details should still be checked against the original unit before ordering.\u003c\/p\u003e\n\u003ch4\u003eHow many teeth does the pinion have?\u003c\/h4\u003e\n\u003cp\u003eThe pinion has 9 teeth. For this listing, part number MS404 is the main reference point. Listed voltage is 12. These details should still be checked against the original unit before ordering.\u003c\/p\u003e\n\u003ch4\u003eWhat rotation does this starter motor use?\u003c\/h4\u003e\n\u003cp\u003eThe starter motor is clockwise, listed as CW. For this listing, part number MS404 is the main reference point. Listed voltage is 12. These details should still be checked against the original unit before ordering.\u003c\/p\u003e\n\u003ch4\u003eWhat mounting setup does it use?\u003c\/h4\u003e\n\u003cp\u003eIt uses a 2 hole starter mount type with 2 mounting bores and 105mm mount centres. For this listing, part number MS404 is the main reference point. Listed voltage is 12. These details should still be checked against the original unit before ordering.\u003c\/p\u003e\n\u003ch4\u003eWhat warranty is listed for this starter motor?\u003c\/h4\u003e\n\u003cp\u003eA one year warranty is listed. For this listing, part number MS404 is the main reference point. Listed voltage is 12. These details should still be checked against the original unit before ordering.\u003c\/p\u003e","brand":"MAHLE","offers":[{"title":"Default Title","offer_id":56888928764064,"sku":"A5411859","price":1207.7,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/5058\/0875\/files\/w2y0RqQduG2BzqsBs4qwpg.jpg?v=1775125117","url":"https:\/\/www.micksgonebush.com.au\/products\/a5411859-mahle-starter-motor-12v-9th-cw","provider":"Micks Gone Bush","version":"1.0","type":"link"}