{"product_id":"a5411861-mahle-alternator-24v-50a","title":"Mahle Alternator 24V 50A MG600, Internal Regulator, Twin Leg Mount","description":"\u003cp\u003eThe MAHLE MG600 is a new 24V alternator with a 50A power rating, supplied with a belt pulley and an internal regulator. It is listed as a twin leg mount unit, with an inside mounting leg measurement of 63mm, a mounting points diameter of 85.0, and a mount centre to centre measurement of 167mm.\u003c\/p\u003e\n\u003cp\u003eThis alternator is identified with Part No. MG600 and Pin Code IR200. Key dimensions supplied include a 12mm pivot hole diameter, an 11mm adjusting hole diameter, a pulley outside diameter of 81mm, and a distance from pulley to alternator of 47.5mm. It is a CCW rotation unit with a single belt and A-section pulley.\u003c\/p\u003e\n\u003cp\u003eThe unit is marked as suitable for Mahle application and is sold as each. It is a 24V, 50A alternator with a one year warranty, so it is important to check the mounting style, pulley arrangement, and electrical requirements against the vehicle or machine before ordering.\u003c\/p\u003e\n\u003cp\u003eThe listed fitment references include Lombardini 15LD and Lombardini Ecowind applications. Those references should be used as guidance only, and the final check should always be made against the part number, mounting dimensions, and regulator type before purchase.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e24V alternator with 50A output\u003c\/li\u003e\n\u003cli\u003eNew unit supplied with belt pulley\u003c\/li\u003e\n\u003cli\u003eInternal regulator type\u003c\/li\u003e\n\u003cli\u003eTwin leg alternator mount\u003c\/li\u003e\n\u003cli\u003eCCW rotation\u003c\/li\u003e\n\u003cli\u003eOne year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: MAHLE\u003c\/li\u003e\n\u003cli\u003eProduct type: Alternator\u003c\/li\u003e\n\u003cli\u003eVoltage: 24V\u003c\/li\u003e\n\u003cli\u003ePower rating: 50A\u003c\/li\u003e\n\u003cli\u003eAlternator charge current: 50A\u003c\/li\u003e\n\u003cli\u003eRegulator type: Internal\u003c\/li\u003e\n\u003cli\u003eRotation: CCW\u003c\/li\u003e\n\u003cli\u003ePulley outside diameter: 81mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment references provided\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLombardini 15LD\u003c\/li\u003e\n\u003cli\u003eLombardini 15LD 2007\u003c\/li\u003e\n\u003cli\u003eLombardini Ecowind\u003c\/li\u003e\n\u003cli\u003eLombardini Ecowind 2007\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication and Buying Notes\u003c\/h3\u003e\n\u003cp\u003eBefore ordering, confirm the existing alternator matches the key identifiers for this unit: 24V voltage, 50A output, internal regulator, CCW rotation, and Part No. MG600. These details matter because a correct-looking alternator can still be unsuitable if the electrical setup, rotation direction, or regulator arrangement differs.\u003c\/p\u003e\n\u003cp\u003eMounting dimensions are just as important as the electrical specification. This alternator is a twin leg mount unit with 63mm inside mounting legs, 85.0 mounting points diameter, 167mm centre to centre, a 12mm pivot hole, and an 11mm adjusting hole. If those measurements do not line up with the existing bracket and adjuster setup, the part is unlikely to install correctly.\u003c\/p\u003e\n\u003cp\u003eThe pulley setup also needs to be checked carefully. This unit has an 81mm pulley outside diameter, an A-section pulley, and a single belt arrangement. If the application uses a different belt profile, pulley size, or multi-belt drive, compatibility should be verified before purchase.\u003c\/p\u003e\n\u003cp\u003eThe fitment references supplied point to Lombardini 15LD and Lombardini Ecowind applications, including 2007 references. Those references are helpful, but they should be matched to the exact engine or equipment details and compared with the physical measurements listed here. A close match on model name alone is not enough for a reliable order decision.\u003c\/p\u003e\n\u003cp\u003eFor buyers replacing an existing unit, the safest approach is to compare the old alternator’s label, mounting ears, pulley style, and charge output against the MG600 listing. This is especially important on equipment where alternator variants can differ by year, application, or mounting arrangement.\u003c\/p\u003e\n\u003cp\u003eIf you are unsure, have the part number, engine model, and measurements checked by a qualified parts interpreter before fitting. That is the best way to avoid a mismatch and to make sure the alternator suits the vehicle or machine as installed.\u003c\/p\u003e\n\u003cp\u003eBefore supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.\u003c\/p\u003e\n\u003cp\u003eFor workshop, fleet, and equipment applications, accurate identification of part number MG600 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.\u003c\/p\u003e\n\u003cp\u003eRelevant published details for this unit include Type ALTERNATOR, Unit of Measure EACH, Warranty One Year, Inside Mounting Legs 63mm, Pivot Hole Diameter 12, Pulley Outside Diameter 81mm, Regulator Type Internal, Suits Unit Make Mahle, Alternator Mount Twin Leg, New \/ Reman. New.\u003c\/p\u003e\n\u003cp\u003eAdditional published details for cross-checking include Pulleys with belt pulley, Mounting points diameter 85.0, Distance from pulley to the alternator 47.5, Packaging width 18.60, Net Weight 4570, Product Group 2 ALTERNATORS, Part No. MG600, Brand MAHLE, Description Mahle Alternator 24V 50A.\u003c\/p\u003e\n\u003cp\u003eMahle Alternator 24V 50A. Part number MG600 should be checked first. Listed voltage is 24. Listed output rating is 50. These details form the core reference points used by parts interpreters when confirming the correct replacement.\u003c\/p\u003e\n\u003cp\u003eMount style is Twin Leg. Regulator type is Internal. Pulley configuration is A. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.\u003c\/p\u003e\n\u003cp\u003eFor part number MG600, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility note:\u003c\/strong\u003e Confirm fitment by matching Part No. MG600, the supplied mounting dimensions, pulley details, voltage, output, and application references before ordering.\u003c\/p\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003ch4\u003eWhat is the voltage and output of this alternator?\u003c\/h4\u003e\n\u003cp\u003eIt is a 24V alternator with a 50A power rating and 50A charge current.\u003c\/p\u003e\n\u003ch4\u003eDoes this alternator have an internal regulator?\u003c\/h4\u003e\n\u003cp\u003eYes. The listed regulator type is internal.\u003c\/p\u003e\n\u003ch4\u003eWhat mounting style does it use?\u003c\/h4\u003e\n\u003cp\u003eIt is listed as a twin leg mount alternator with 63mm inside mounting legs, a 12mm pivot hole, and an 11mm adjusting hole.\u003c\/p\u003e\n\u003ch4\u003eWhat pulley details are supplied?\u003c\/h4\u003e\n\u003cp\u003eThe alternator comes with a belt pulley, has an 81mm pulley outside diameter, uses an A-section pulley, and is listed with one belt.\u003c\/p\u003e\n\u003ch4\u003eWhat fitment references are provided?\u003c\/h4\u003e\n\u003cp\u003eThe supplied fitment references include Lombardini 15LD and Lombardini Ecowind, including 2007 references.\u003c\/p\u003e\n\u003ch4\u003eWhat should I confirm before buying?\u003c\/h4\u003e\n\u003cp\u003eCheck the part number MG600, 24V voltage, 50A output, CCW rotation, internal regulator, pulley style, and all mounting measurements against the existing unit.\u003c\/p\u003e","brand":"MAHLE","offers":[{"title":"Default Title","offer_id":56888757747872,"sku":"A5411861","price":867.1,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/5058\/0875\/files\/IAwxDHNjuWsTiORYWZVigQ.jpg?v=1775122578","url":"https:\/\/www.micksgonebush.com.au\/products\/a5411861-mahle-alternator-24v-50a","provider":"Micks Gone Bush","version":"1.0","type":"link"}