{"product_id":"a5418980-denso-alternator-24v-150a","title":"Denso Alternator 24V 150A New Brushless Pad Mount Part No. 211-8008","description":"\u003cp\u003eThe Denso Alternator 24V 150A, part no. 211-8008, is a new alternator supplied as an each unit for rotating electrical applications. It is a 24 volt, 150 amp alternator with a pad mount setup, internal regulator and brushless design, so matching the part number and mounting details is essential before ordering.\u003c\/p\u003e\n\u003cp\u003eMount dimensions on this unit include 108mm inside mounting legs, 190mm mount centre to centre, 80mm mount leg thickness, and 13mm pivot and adjusting hole diameters. The shaft diameter is 22mm and the listed weight is 11.1kg, which gives a practical reference point when comparing against a removed unit.\u003c\/p\u003e\n\u003cp\u003eThis alternator is described as using premium cores and precise OE assembly benchmarks, and it is intended to meet demanding heat and electrical requirements. For buyers replacing a working unit in a heavy-duty application, the combination of 24V output, 150A capacity and internal regulation are the key identifiers to verify against the original alternator.\u003c\/p\u003e\n\u003cp\u003eIt is a Denso-branded alternator, listed under product group 1 as Rotating Electrical and product group 2 as Alternators. The unit is new, brushless, and backed by a one year warranty.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e24V alternator with 150A output\u003c\/li\u003e\n\u003cli\u003eNew, brushless unit\u003c\/li\u003e\n\u003cli\u003eInternal regulator type\u003c\/li\u003e\n\u003cli\u003ePad mount alternator\u003c\/li\u003e\n\u003cli\u003ePart no. 211-8008\u003c\/li\u003e\n\u003cli\u003eOne year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Denso\u003c\/li\u003e\n\u003cli\u003eProduct type: Alternator\u003c\/li\u003e\n\u003cli\u003eVoltage: 24V\u003c\/li\u003e\n\u003cli\u003ePower rating: 150 amp\u003c\/li\u003e\n\u003cli\u003ePart number: 211-8008\u003c\/li\u003e\n\u003cli\u003eNew \/ remanufactured: New\u003c\/li\u003e\n\u003cli\u003eRegulator type: Internal\u003c\/li\u003e\n\u003cli\u003eAlternator mount: Pad\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVerified fitment references\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBarko: Various\u003c\/li\u003e\n\u003cli\u003eBomag: BM1200\/30, BM1300\/30\u003c\/li\u003e\n\u003cli\u003eCaterpillar: 120K, 120M, 12K, 12M, 140K, 140M, 140M-3, 140M-AWD, 140M-AWD 2018, 14M, 14M3, 160K\u003c\/li\u003e\n\u003cli\u003eIveco: Eurotech MP, Powerstar\u003c\/li\u003e\n\u003cli\u003eJohn Deere: 430D\u003c\/li\u003e\n\u003cli\u003eMorooka: MST2200VD\u003c\/li\u003e\n\u003cli\u003ePeterson: 5000H, 6710D\u003c\/li\u003e\n\u003cli\u003eTerex O\u0026amp;K: RH170, RH170B, SKF, SKF-11, SKF-12, SKF-15, TA35, TA350, TA40, TA400\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication and Buying Notes\u003c\/h3\u003e\n\u003cp\u003eBefore ordering, confirm the replacement unit is also a 24V, 150A alternator with the same part number, 211-8008, and the same pad mount arrangement. The mounting dimensions matter here: 108mm inside mounting legs, 190mm mount centre to centre, 80mm mount leg thickness, and 13mm pivot and adjusting holes.\u003c\/p\u003e\n\u003cp\u003eThe shaft diameter is 22mm, which is another useful checkpoint when comparing the removed alternator to this one. If the mounting legs, hole sizes or shaft dimension differ, the unit may not install correctly even if the alternator looks similar.\u003c\/p\u003e\n\u003cp\u003eBecause this alternator uses an internal regulator and is listed as brushless, buyers should avoid assuming interchangeability with a different regulator style or brushed unit. The safest approach is to compare the removed unit, the part number, and the application details together before purchase.\u003c\/p\u003e\n\u003cp\u003eThe listed fitment references cover a range of heavy equipment and industrial applications, including Caterpillar, Iveco, John Deere, Morooka, Peterson and Terex O\u0026amp;K examples. However, fitment can still vary by machine build, engine setup or electrical specification, so a visual and dimensional check remains important.\u003c\/p\u003e\n\u003cp\u003eAt 11.1kg, this is a substantial rotating electrical component, so it is worth checking the physical space, bracket arrangement and connector setup before fitting. The one year warranty applies to the unit as supplied, but correct application matching remains the buyer’s responsibility.\u003c\/p\u003e\n\u003cp\u003eBefore supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.\u003c\/p\u003e\n\u003cp\u003eFor workshop, fleet, and equipment applications, accurate identification of part number 211-8008 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.\u003c\/p\u003e\n\u003cp\u003eRelevant published details for this unit include Type ALTERNATOR, Unit of Measure EACH, Warranty One Year, Inside Mounting Legs 108mm, Pivot Hole Diameter 13, Regulator Type Internal, Suits Unit Make Denso, Note Brushless, Mount Cnt to Cnt 190mm, Shaft Dimension 22.\u003c\/p\u003e\n\u003cp\u003eAdditional published details for cross-checking include Product Group 2 ALTERNATORS, Part No. 211-8008, Brand DENSO, Description Denso Alternator 24V 150A, Adjusting Hole Diameter 13, Mount Leg Thickness 80mm, Power Rating (Amp) 150, Shaft Diameter 22mm, Voltage 24.\u003c\/p\u003e\n\u003cp\u003eDenso Alternator 24V 150A. Part number 211-8008 should be checked first. Listed voltage is 24. Listed output rating is 150. These details form the core reference points used by parts interpreters when confirming the correct replacement.\u003c\/p\u003e\n\u003cp\u003eMount style is Pad. Regulator type is Internal. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.\u003c\/p\u003e\n\u003cp\u003eFor part number 211-8008, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.\u003c\/p\u003e\n\u003cp\u003eFor a alternator in workshop, fleet, trade, agricultural, or construction service, the listed voltage 24 and output 150 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.\u003c\/p\u003e\n\u003cp\u003eAvailable application references include BARKO VARIOUS, BOMAG BM1200\/30, BOMAG BM1300\/30, CATERPILLAR 120K, CATERPILLAR 120M, CATERPILLAR 12K. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility note:\u003c\/strong\u003e Please confirm fitment using part number 211-8008, 24V 150A rating, pad mount configuration, internal regulator type and the listed mounting dimensions before ordering.\u003c\/p\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003ch4\u003eWhat is the part number for this alternator?\u003c\/h4\u003e\n\u003cp\u003eThe part number is 211-8008.\u003c\/p\u003e\n\u003ch4\u003eIs this alternator new or remanufactured?\u003c\/h4\u003e\n\u003cp\u003eIt is listed as new.\u003c\/p\u003e\n\u003ch4\u003eWhat voltage and output does it have?\u003c\/h4\u003e\n\u003cp\u003eIt is a 24V alternator with a 150A power rating.\u003c\/p\u003e\n\u003ch4\u003eWhat type of regulator does it use?\u003c\/h4\u003e\n\u003cp\u003eIt uses an internal regulator.\u003c\/p\u003e\n\u003ch4\u003eWhat are the key mounting dimensions?\u003c\/h4\u003e\n\u003cp\u003eThe listed dimensions are 108mm inside mounting legs, 190mm mount centre to centre, 80mm mount leg thickness, and 13mm pivot and adjusting hole diameters.\u003c\/p\u003e\n\u003ch4\u003eDoes it have verified application references?\u003c\/h4\u003e\n\u003cp\u003eYes. Verified references include Barko various, Bomag BM1200\/30 and BM1300\/30, several Caterpillar models, Iveco Eurotech MP and Powerstar, John Deere 430D, Morooka MST2200VD, Peterson 5000H and 6710D, and several Terex O\u0026amp;K models.\u003c\/p\u003e","brand":"DENSO","offers":[{"title":"Default Title","offer_id":56888749719712,"sku":"A5418980","price":3342.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/5058\/0875\/files\/m4ZS2LPzVSt-z6ZbzNo2ZQ.jpg?v=1775122404","url":"https:\/\/www.micksgonebush.com.au\/products\/a5418980-denso-alternator-24v-150a","provider":"Micks Gone Bush","version":"1.0","type":"link"}