{"product_id":"a5420046-denso-starter-motor-12v-9th-cw","title":"Denso Starter Motor 12V 1.2KW 9 Tooth CW DXS641","description":"\u003cp\u003eThe Denso starter motor DXS641 is a 12V, 1.2kW unit with 9 teeth and clockwise rotation, supplied new and sold each. It suits Denso applications and is listed with a 2-hole starter mount, 130mm mount centres, and an 89mm flange diameter.\u003c\/p\u003e\n\u003cp\u003eKey dimensions to check before ordering are the 212mm overall length, 11mm mount hole diameter, 29mm pinion diameter, and 16mm pinion at rest. The unit weighs 3.10kg and is identified as part number DXS641.\u003c\/p\u003e\n\u003cp\u003eThis is a dry-clutch starter motor for rotating electrical applications, with high-voltage tested armature and field coils, premium copper terminals, and maximum cranking torque under all conditions. Those features are relevant when you need a replacement that matches the electrical and physical setup already on the machine.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e12V starter motor\u003c\/li\u003e\n\u003cli\u003e1.2kW power rating\u003c\/li\u003e\n\u003cli\u003e9-tooth pinion\u003c\/li\u003e\n\u003cli\u003eClockwise rotation\u003c\/li\u003e\n\u003cli\u003eNew unit\u003c\/li\u003e\n\u003cli\u003e2-hole starter mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Denso\u003c\/li\u003e\n\u003cli\u003ePart number: DXS641\u003c\/li\u003e\n\u003cli\u003eUnit of measure: Each\u003c\/li\u003e\n\u003cli\u003eVoltage: 12V\u003c\/li\u003e\n\u003cli\u003ePower rating: 1.2kW\u003c\/li\u003e\n\u003cli\u003eRotation: CW\u003c\/li\u003e\n\u003cli\u003eNumber of teeth: 9\u003c\/li\u003e\n\u003cli\u003eStarter mount type: 2 hole\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVerified fitment guidance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuits unit make: Denso\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication and Buying Notes\u003c\/h3\u003e\n\u003cp\u003eWhen matching this starter motor, the safest checks are the part number DXS641, the 12V system voltage, and the physical layout: 9 teeth, clockwise rotation, 2-hole mounting, 130mm mount centres, and an 89mm flange diameter. A starter can look similar yet differ in tooth count, rotation, or mounting pattern, so those details matter just as much as the vehicle model.\u003c\/p\u003e\n\u003cp\u003eThe pinion diameter is 29mm, the pinion at rest is 16mm, and the overall length is 212mm. These measurements help confirm the replacement will sit and engage as expected in the existing application. The unit is listed as dry and weighs 3.10kg, which is useful when comparing against a removed starter or an existing supplier reference.\u003c\/p\u003e\n\u003cp\u003eFor the best result, confirm the machine’s Denso application and match the part number DXS641 against the starter already fitted. If there is any doubt about rotation, mount centres, or flange diameter, it is better to verify those points first than to rely on appearance alone.\u003c\/p\u003e\n\u003cp\u003eBefore supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.\u003c\/p\u003e\n\u003cp\u003eFor workshop, fleet, and equipment applications, accurate identification of part number DXS641 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.\u003c\/p\u003e\n\u003cp\u003eRelevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty One Year, Mount Centres A 130mm, Number of Teeth 9, Pinion at Rest 16mm, Power Rating 1.2kW, Suits Unit Make Denso, Item Type Starter Motor, Starter Mount Type 2 Hole.\u003c\/p\u003e\n\u003cp\u003eAdditional published details for cross-checking include Weight 3.10kg, Product Group 1 ROTATING ELECTRICAL, Part No. DXS641, Brand DENSO, Description Denso Starter Motor 12V 9Th CW, Flange Diameter 89mm, Mount Hole Diameter 11, Overall Length 212mm, Pinion Diameter 29mm, Rotation CW.\u003c\/p\u003e\n\u003cp\u003eDenso Starter Motor 12V 9Th CW. Part number DXS641 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.\u003c\/p\u003e\n\u003cp\u003eFor part number DXS641, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.\u003c\/p\u003e\n\u003cp\u003eFor a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.\u003c\/p\u003e\n\u003cp\u003eAvailable application references include AIRMAN AX26U-6A, AIRMAN AX26U-6A 2013, AMMANN ARX12, AMMANN ARX12 2013, AMMANN ARX12 2016, AMMANN ARX16\/K. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.\u003c\/p\u003e\n\u003cp\u003eThe listed warranty is One Year. Warranty terms should be considered alongside correct application and part identification, as warranty does not replace fitment confirmation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility note:\u003c\/strong\u003e Please confirm compatibility by checking part number DXS641, 12V voltage, clockwise rotation, 9 teeth, 2-hole mounting, 130mm mount centres, 89mm flange diameter, and the application details before purchase.\u003c\/p\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003ch4\u003eWhat is the part number for this starter motor?\u003c\/h4\u003e\n\u003cp\u003eThe part number is DXS641. For this listing, part number DXS641 is the main reference point. Listed voltage is 12. Published fitment references include AIRMAN AX26U-6A, AIRMAN AX26U-6A 2013, AMMANN ARX12. These details should still be checked against the original unit before ordering.\u003c\/p\u003e\n\u003ch4\u003eWhat voltage is this starter motor?\u003c\/h4\u003e\n\u003cp\u003eIt is a 12V starter motor. For this listing, part number DXS641 is the main reference point. Listed voltage is 12. Published fitment references include AIRMAN AX26U-6A, AIRMAN AX26U-6A 2013, AMMANN ARX12. These details should still be checked against the original unit before ordering.\u003c\/p\u003e\n\u003ch4\u003eHow many teeth does the pinion have?\u003c\/h4\u003e\n\u003cp\u003eThe pinion has 9 teeth. For this listing, part number DXS641 is the main reference point. Listed voltage is 12. Published fitment references include AIRMAN AX26U-6A, AIRMAN AX26U-6A 2013, AMMANN ARX12. These details should still be checked against the original unit before ordering.\u003c\/p\u003e\n\u003ch4\u003eWhat rotation does this starter motor use?\u003c\/h4\u003e\n\u003cp\u003eIt is clockwise rotation, shown as CW. For this listing, part number DXS641 is the main reference point. Listed voltage is 12. Published fitment references include AIRMAN AX26U-6A, AIRMAN AX26U-6A 2013, AMMANN ARX12. These details should still be checked against the original unit before ordering.\u003c\/p\u003e\n\u003ch4\u003eIs this starter motor new or remanufactured?\u003c\/h4\u003e\n\u003cp\u003eIt is listed as new. For this listing, part number DXS641 is the main reference point. Listed voltage is 12. Published fitment references include AIRMAN AX26U-6A, AIRMAN AX26U-6A 2013, AMMANN ARX12. These details should still be checked against the original unit before ordering.\u003c\/p\u003e\n\u003ch4\u003eWhat should I check before buying?\u003c\/h4\u003e\n\u003cp\u003eConfirm the part number DXS641, 12V voltage, 9-tooth pinion, CW rotation, 2-hole mount, 130mm mount centres, 89mm flange diameter, and the application details on the machine. For this listing, part number DXS641 is the main reference point. Listed voltage is 12. Published fitment references include AIRMAN AX26U-6A, AIRMAN AX26U-6A 2013, AMMANN ARX12. These details should still be checked against the original unit before ordering.\u003c\/p\u003e","brand":"DENSO","offers":[{"title":"Default Title","offer_id":56888910086304,"sku":"A5420046","price":500.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/5058\/0875\/files\/sUqJ7lg96TvkpxOB1l8p0w.jpg?v=1775124854","url":"https:\/\/www.micksgonebush.com.au\/products\/a5420046-denso-starter-motor-12v-9th-cw","provider":"Micks Gone Bush","version":"1.0","type":"link"}