{"product_id":"a5438274-oex-starter-motor-12v-9th-cw-mitsubishi","title":"OEX Starter Motor 12V 9 Tooth CW Mitsubishi Style MXS9610","description":"\u003cp\u003eThe OEX Starter Motor MXS9610 is a new 12V starter motor with 9 teeth, clockwise rotation, and a Mitsubishi style application. It is listed with a 2 hole starter mount type, a 74mm flange diameter, and 110mm mount centres A, so those are the key measurements to check against the unit being replaced.\u003c\/p\u003e\n\u003cp\u003eThis starter motor is supplied as a new unit and is intended for dry clutch applications. The pinion diameter is 28.5mm, which, along with the 9 tooth count and CW rotation, should be matched carefully before ordering, especially where the original starter has been changed previously or the machine has been repaired with non-standard parts.\u003c\/p\u003e\n\u003cp\u003eOEX states the brand is sourced from market leading original equipment manufacturers and aftermarket suppliers, with products sourced from ISO certified factories. This part is backed by a 3yr passenger \/ 1yr commercial warranty, but the practical fit check still comes back to the part number MXS9610 and the stated starter dimensions and rotation.\u003c\/p\u003e\n\u003cp\u003eThe listing shows Mitsubishi as the unit make, and the fitment information includes a range of CASE, Ford, Gehl, John Deere, New Holland, Perkins and Yanmar applications. Because starter fitment can vary by build, engine and previous replacement history, it is important to confirm the application details carefully before purchase.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNew 12V starter motor\u003c\/li\u003e\n\u003cli\u003e9 tooth pinion\u003c\/li\u003e\n\u003cli\u003eClockwise rotation (CW)\u003c\/li\u003e\n\u003cli\u003e2 hole starter mount type\u003c\/li\u003e\n\u003cli\u003eMitsubishi style application\u003c\/li\u003e\n\u003cli\u003e74mm flange diameter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: OEX\u003c\/li\u003e\n\u003cli\u003eProduct type: Starter Motor\u003c\/li\u003e\n\u003cli\u003ePart No.: MXS9610\u003c\/li\u003e\n\u003cli\u003eVoltage: 12V\u003c\/li\u003e\n\u003cli\u003eRotation: CW\u003c\/li\u003e\n\u003cli\u003eNumber of teeth: 9\u003c\/li\u003e\n\u003cli\u003eStarter mount type: 2 hole\u003c\/li\u003e\n\u003cli\u003eMount centres A: 110mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKnown fitment applications supplied for this starter motor\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCASE IH DX series\u003c\/li\u003e\n\u003cli\u003eCASE SR130\u003c\/li\u003e\n\u003cli\u003eCASE SR150\u003c\/li\u003e\n\u003cli\u003eCASE SR175\u003c\/li\u003e\n\u003cli\u003eCASE SV185\u003c\/li\u003e\n\u003cli\u003eFord 1000-Series\u003c\/li\u003e\n\u003cli\u003eGehl SL4610\/4615\u003c\/li\u003e\n\u003cli\u003eJohn Deere 2030\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication and Buying Notes\u003c\/h3\u003e\n\u003cp\u003eBefore ordering, match the part number MXS9610 against the existing starter and confirm the important physical details: 12V voltage, 9 tooth pinion, CW rotation, 2 hole mount, 74mm flange diameter and 110mm mount centres A. These are the practical checks that help avoid a mismatch when the original unit has been superseded or swapped previously.\u003c\/p\u003e\n\u003cp\u003eThe pinion diameter of 28.5mm and the dry clutch designation are also worth confirming, because starter motors can look similar while differing in mounting or engagement dimensions. If the removed unit has a legible tag or casting number, compare that information directly with the application details before fitting.\u003c\/p\u003e\n\u003cp\u003eThe fitment list covers a number of machine families, including CASE IH DX, Ford 1000-Series, Gehl SL4610\/4615, John Deere 2030, New Holland Boomer, New Holland C175, New Holland CM274 and several Yanmar models. Even where a model name appears on the list, engine variant, year and previous repairs can affect the correct starter selection.\u003c\/p\u003e\n\u003cp\u003eThis starter is supplied new, not remanufactured, and is covered by a 3yr passenger \/ 1yr commercial warranty. That warranty does not replace fitment verification, so the safest approach is to confirm the starter measurements, rotation and application details before installation or disposal of the old unit.\u003c\/p\u003e\n\u003cp\u003eIf you are comparing alternatives, pay attention to the combination of 9 teeth, CW rotation and the 2 hole mount. Those three points, together with the 74mm flange diameter and 110mm mount centres A, are usually the most useful identifiers when checking whether another starter is the same style.\u003c\/p\u003e\n\u003cp\u003eBefore supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.\u003c\/p\u003e\n\u003cp\u003eFor workshop, fleet, and equipment applications, accurate identification of part number MXS9610 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.\u003c\/p\u003e\n\u003cp\u003eRelevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty 3yr Passenger 1yr Commercial, Mount Centres A 110mm, Pinion Diameter 28.5mm, Suits Unit Make Mitsubishi, Item Type Starter Motor, Starter Mount Type 2 Hole, Product Group 2 STARTER MOTORS.\u003c\/p\u003e\n\u003cp\u003eAdditional published details for cross-checking include Part No. MXS9610, Brand OEX, Description OEX Starter Motor 12V 9Th CW Mitsubishi Style, Flange Diameter 74mm, Number of Teeth 9, Rotation CW, Voltage 12, New \/ Reman. New, Wet \/ Dry Clutch Dry, Product Group 1 ROTATING ELECTRICAL.\u003c\/p\u003e\n\u003cp\u003eOEX Starter Motor 12V 9Th CW Mitsubishi Style. Part number MXS9610 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.\u003c\/p\u003e\n\u003cp\u003eFor part number MXS9610, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.\u003c\/p\u003e\n\u003cp\u003eFor a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.\u003c\/p\u003e\n\u003cp\u003eAvailable application references include CASE IH, CASE IH DX, CASE IH DX 2004, CASE IH DX 2005, FORD 1000-SERIES, FORD 1000-SERIES 1983. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility note:\u003c\/strong\u003e Confirm compatibility by matching part number MXS9610, 12V voltage, 9 tooth CW configuration, 2 hole mount, 74mm flange diameter, 110mm mount centres A and the listed application details before ordering.\u003c\/p\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003ch4\u003eIs this starter motor new or remanufactured?\u003c\/h4\u003e\n\u003cp\u003eIt is listed as new.\u003c\/p\u003e\n\u003ch4\u003eWhat voltage is the OEX MXS9610 starter motor?\u003c\/h4\u003e\n\u003cp\u003eThe voltage listed is 12V.\u003c\/p\u003e\n\u003ch4\u003eHow many teeth does the pinion have?\u003c\/h4\u003e\n\u003cp\u003eIt has 9 teeth.\u003c\/p\u003e\n\u003ch4\u003eWhat rotation does this starter use?\u003c\/h4\u003e\n\u003cp\u003eThe rotation is clockwise (CW).\u003c\/p\u003e\n\u003ch4\u003eWhat are the key mounting measurements?\u003c\/h4\u003e\n\u003cp\u003eThe listed mounting details are a 2 hole starter mount type, 74mm flange diameter and 110mm mount centres A.\u003c\/p\u003e\n\u003ch4\u003eWhat warranty is listed for this starter motor?\u003c\/h4\u003e\n\u003cp\u003eThe listed warranty is 3yr Passenger \/ 1yr Commercial.\u003c\/p\u003e","brand":"OEX","offers":[{"title":"Default Title","offer_id":56888893866144,"sku":"A5438274","price":430.3,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/5058\/0875\/files\/d8OOj1qZdOQrdyo-GHlt7A.jpg?v=1775124619","url":"https:\/\/www.micksgonebush.com.au\/products\/a5438274-oex-starter-motor-12v-9th-cw-mitsubishi","provider":"Micks Gone Bush","version":"1.0","type":"link"}