{"product_id":"a5438589-sanden-air-conditioning-compressor-12v-d","title":"Sanden Air Conditioning Compressor 12V Direct Mount SD7H15 CXS4942","description":"\u003cp\u003eThe Sanden SD7H15 air conditioning compressor is a 12V, direct mount unit supplied under part number CXS4942. It is listed with a vertical O-ring fitting type, 6 groove pulley section, 119mm clutch diameter, and a 54.38mm gauge line, which are the key details to match before ordering.\u003c\/p\u003e\n\u003cp\u003eThis compressor is noted as suitable for Kenworth Long Nose Truck applications from 2\/2018 onward. It is also marked as not suitable for Kenworth cab over models, so the body style check matters as much as the part number when confirming the right compressor for the vehicle.\u003c\/p\u003e\n\u003cp\u003eThe unit is supplied as a Sanden unit with dust cover included and an oil capacity of 240ml. Warranty is listed as one year, which gives a clear baseline for purchase and installation planning, especially where the existing compressor has the same SD7H15 series and direct mount layout.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSanden air conditioning compressor\u003c\/li\u003e\n\u003cli\u003e12V electrical system\u003c\/li\u003e\n\u003cli\u003eDirect mount compressor\u003c\/li\u003e\n\u003cli\u003eSD7H15 series\u003c\/li\u003e\n\u003cli\u003ePart number CXS4942\u003c\/li\u003e\n\u003cli\u003eVertical O-ring fitting type\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Sanden\u003c\/li\u003e\n\u003cli\u003eProduct type: Air conditioning compressor\u003c\/li\u003e\n\u003cli\u003eSeries: SD7H15\u003c\/li\u003e\n\u003cli\u003eVoltage: 12V\u003c\/li\u003e\n\u003cli\u003eCompressor mounting: Direct mount\u003c\/li\u003e\n\u003cli\u003eOriginal equipment number: F69-1006-211V2\u003c\/li\u003e\n\u003cli\u003ePart no.: CXS4942\u003c\/li\u003e\n\u003cli\u003eClutch diameter: 119mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVerified fitment guidance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eKenworth Long Nose Truck from 2\/2018 onward\u003c\/li\u003e\n\u003cli\u003eNot suitable for Kenworth cab over models\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication and Buying Notes\u003c\/h3\u003e\n\u003cp\u003eWhen comparing an existing compressor, the most useful checks on this unit are the part number CXS4942, the SD7H15 series, and the direct mount configuration. The listed clutch diameter is 119mm, the pulley section is 6 groove, and the fitting type is vertical O-ring, so these details should be matched carefully against the vehicle already on hand.\u003c\/p\u003e\n\u003cp\u003eOil capacity is listed at 240ml, and the unit includes a dust cover. Those details do not replace fitment checking, but they are practical points to confirm during installation and when comparing with an existing compressor that may have a different configuration or service condition.\u003c\/p\u003e\n\u003cp\u003eBefore supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.\u003c\/p\u003e\n\u003cp\u003eFor workshop, fleet, and equipment applications, accurate identification of part number CXS4942 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.\u003c\/p\u003e\n\u003cp\u003eRelevant published details for this unit include Type AIR CONDITIONING COMPRESSOR, Unit of Measure EACH, Warranty One Year, Compressor Mounting Direct Mount, Original Equipment Number F69-1006-211V2, Series SD7H15, Voltage 12, Gauge Line 54.38mm, Dust Cover Y\/N Yes.\u003c\/p\u003e\n\u003cp\u003eAdditional published details for cross-checking include Product Group 2 AC COMPONENTS, Part No. CXS4942, Brand SANDEN, Description Sanden Air Conditioning Compressor 12V Direct Mount SD7H15, Clutch Diameter 119mm, Fitting Type Vertical O Ring, Pulley Section 6 Groove, Suits Unit Make Sanden, Note Does not suit Kenworth cab over models, Oil Capacity 240ml.\u003c\/p\u003e\n\u003cp\u003eSanden Air Conditioning Compressor 12V Direct Mount SD7H15. Part number CXS4942 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.\u003c\/p\u003e\n\u003cp\u003ePulley configuration is 6 Groove. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.\u003c\/p\u003e\n\u003cp\u003eFor part number CXS4942, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.\u003c\/p\u003e\n\u003cp\u003eFor a air conditioning compressor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.\u003c\/p\u003e\n\u003cp\u003eAvailable application references include KENWORTH K-SERIES, KENWORTH K-SERIES 2018, KENWORTH T-SERIES, KENWORTH T-SERIES 1996. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.\u003c\/p\u003e\n\u003cp\u003eThe listed warranty is One Year. Warranty terms should be considered alongside correct application and part identification, as warranty does not replace fitment confirmation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility note:\u003c\/strong\u003e Please confirm fitment by matching part number CXS4942, SD7H15 series, 12V direct mount configuration, and the stated Kenworth Long Nose Truck application before ordering. Do not rely on model name alone, and note that this compressor does not suit Kenworth cab over models.\u003c\/p\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003ch4\u003eWhat part number is listed for this compressor?\u003c\/h4\u003e\n\u003cp\u003eThe listed part number is CXS4942. For this listing, part number CXS4942 is the main reference point. Listed voltage is 12. Published fitment references include KENWORTH K-SERIES, KENWORTH K-SERIES 2018, KENWORTH T-SERIES. These details should still be checked against the original unit before ordering.\u003c\/p\u003e\n\u003ch4\u003eWhat vehicle application is stated for this compressor?\u003c\/h4\u003e\n\u003cp\u003eIt is stated to suit Kenworth Long Nose Truck applications from 2\/2018 onward. For this listing, part number CXS4942 is the main reference point. Listed voltage is 12. Published fitment references include KENWORTH K-SERIES, KENWORTH K-SERIES 2018, KENWORTH T-SERIES. These details should still be checked against the original unit before ordering.\u003c\/p\u003e\n\u003ch4\u003eDoes this compressor suit Kenworth cab over models?\u003c\/h4\u003e\n\u003cp\u003eNo. It is specifically noted as not suiting Kenworth cab over models. For this listing, part number CXS4942 is the main reference point. Listed voltage is 12. Published fitment references include KENWORTH K-SERIES, KENWORTH K-SERIES 2018, KENWORTH T-SERIES. These details should still be checked against the original unit before ordering.\u003c\/p\u003e\n\u003ch4\u003eWhat are the main mounting and connection details?\u003c\/h4\u003e\n\u003cp\u003eIt is a direct mount compressor with a vertical O-ring fitting type. For this listing, part number CXS4942 is the main reference point. Listed voltage is 12. Published fitment references include KENWORTH K-SERIES, KENWORTH K-SERIES 2018, KENWORTH T-SERIES. These details should still be checked against the original unit before ordering.\u003c\/p\u003e\n\u003ch4\u003eWhat are the key size and drive details?\u003c\/h4\u003e\n\u003cp\u003eThe listed clutch diameter is 119mm and the pulley section is 6 groove. For this listing, part number CXS4942 is the main reference point. Listed voltage is 12. Published fitment references include KENWORTH K-SERIES, KENWORTH K-SERIES 2018, KENWORTH T-SERIES. These details should still be checked against the original unit before ordering.\u003c\/p\u003e\n\u003ch4\u003eWhat warranty is listed?\u003c\/h4\u003e\n\u003cp\u003eA one year warranty is listed. For this listing, part number CXS4942 is the main reference point. Listed voltage is 12. Published fitment references include KENWORTH K-SERIES, KENWORTH K-SERIES 2018, KENWORTH T-SERIES. These details should still be checked against the original unit before ordering.\u003c\/p\u003e","brand":"SANDEN","offers":[{"title":"Default Title","offer_id":56889201557664,"sku":"A5438589","price":923.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/5058\/0875\/files\/N49H8jJpup-CTwE8vyHxiw.jpg?v=1775128775","url":"https:\/\/www.micksgonebush.com.au\/products\/a5438589-sanden-air-conditioning-compressor-12v-d","provider":"Micks Gone Bush","version":"1.0","type":"link"}