{"product_id":"a5465144-oex-e-stop-contact-nc","title":"OEX E-stop Contact N\/C Switch 3A 12–110V Part No. ACX3436","description":"\u003cp\u003eThe OEX E-Stop Contact N\/C is a micro switch supplied as a single each item, with a 3 amp power rating and a 12 to 110 volt operating range. It is listed under Part No. ACX3436 and described as an OEX E-Stop Contact N\/C, which is the key identifier to check before ordering.\u003c\/p\u003e\n\u003cp\u003eThis switch is non illuminated and uses an On - Mom Off - Other switch action. That combination matters when matching the part to the intended panel or control setup, especially where the original switch type, action, and electrical rating need to align with the replacement.\u003c\/p\u003e\n\u003cp\u003eThe stated note for this part is that it suits ACX3438PANEL and ACX3438METAL. If you are replacing a switch in either of those applications, the part number ACX3436 and the listed compatibility note are the main details to confirm before purchase.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOEX E-Stop Contact N\/C switch\u003c\/li\u003e\n\u003cli\u003ePart No. ACX3436\u003c\/li\u003e\n\u003cli\u003e3 amp power rating\u003c\/li\u003e\n\u003cli\u003e12 to 110 volt rating\u003c\/li\u003e\n\u003cli\u003eMicro switch type\u003c\/li\u003e\n\u003cli\u003eNon illuminated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: OEX\u003c\/li\u003e\n\u003cli\u003eProduct type: Switch\u003c\/li\u003e\n\u003cli\u003eUnit of measure: Each\u003c\/li\u003e\n\u003cli\u003eWarranty: One Year\u003c\/li\u003e\n\u003cli\u003eSwitch type: Micro\u003c\/li\u003e\n\u003cli\u003eSwitch illumination: Non illuminated\u003c\/li\u003e\n\u003cli\u003ePower rating: 3A\u003c\/li\u003e\n\u003cli\u003eVoltage: 12 to 110V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment Guidance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuits ACX3438PANEL\u003c\/li\u003e\n\u003cli\u003eSuits ACX3438METAL\u003c\/li\u003e\n\u003cli\u003eConfirm the part number ACX3436 against the original switch before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication and Buying Notes\u003c\/h3\u003e\n\u003cp\u003eIf you are matching this switch to an existing installation, the most important checkpoints are the part number ACX3436, the 3A current rating, and the 12 to 110V operating range. Those details should be checked against the original component and the panel or control it is being fitted to, because the switch action is listed as On - Mom Off - Other and the unit is non illuminated.\u003c\/p\u003e\n\u003cp\u003eThe compatibility note is specific: this switch suits ACX3438PANEL and ACX3438METAL. That gives you a clear application reference, but it is still worth checking the physical switch style, terminal arrangement, and the original marking on the existing part to make sure the replacement is the correct one for the job.\u003c\/p\u003e\n\u003cp\u003eThis is sold as an each item and carries a one year warranty. For electrical replacement parts, the safest approach is to match the printed part number, confirm the voltage and amperage requirements, and only proceed if the intended application aligns with the supplied compatibility note. That is particularly important where the switch is part of an emergency stop or control circuit.\u003c\/p\u003e\n\u003cp\u003eBecause the switch is non illuminated, it is intended for setups that do not require a built-in light source in the actuator. If your original switch has illumination or a different switching action, it may not be the correct replacement even if the physical size appears similar. Cross-checking the existing component against ACX3436 is the most reliable way to avoid a mismatch.\u003c\/p\u003e\n\u003cp\u003eBefore supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.\u003c\/p\u003e\n\u003cp\u003eFor workshop, fleet, and equipment applications, accurate identification of part number ACX3436 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.\u003c\/p\u003e\n\u003cp\u003eRelevant published details for this unit include Type SWITCH, Unit of Measure EACH, Warranty One Year, Switch Action On - Mom Off - Other, Note Suits ACX3438PANEL \u0026amp; ACX3438METAL, Switch Illumination Non Illuminated, Product Group 1 AUTO ELEC ACCESSORIES, Part No. ACX3436, Brand OEX, Description OEX E-Stop Contact N\/C.\u003c\/p\u003e\n\u003cp\u003eAdditional published details for cross-checking include Power Rating (Amp) 3, Voltage 12 to 110, Switch Type Micro, Product Group 2 FUSES BREAKERS RELAYS SWITCHES.\u003c\/p\u003e\n\u003cp\u003eOEX E-Stop Contact N\/C. Part number ACX3436 should be checked first. Listed voltage is 12 to 110. Listed output rating is 3. These details form the core reference points used by parts interpreters when confirming the correct replacement.\u003c\/p\u003e\n\u003cp\u003eFor part number ACX3436, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.\u003c\/p\u003e\n\u003cp\u003eFor a switch in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 to 110 and output 3 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.\u003c\/p\u003e\n\u003cp\u003eWhere no verified application list is available, the part number, mounting details, connector style, and published specifications should be used as the primary selection criteria.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility note:\u003c\/strong\u003e Confirm fitment by checking part number ACX3436 and comparing the original switch’s application, action, voltage, and amperage requirements with the listed suitability for ACX3438PANEL and ACX3438METAL.\u003c\/p\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003ch4\u003eWhat is the part number for this OEX switch?\u003c\/h4\u003e\n\u003cp\u003eThe part number listed is ACX3436. For this listing, part number ACX3436 is the main reference point. Listed voltage is 12 to 110. Listed output rating is 3. These details should still be checked against the original unit before ordering.\u003c\/p\u003e\n\u003ch4\u003eWhat voltage range does this switch suit?\u003c\/h4\u003e\n\u003cp\u003eIt is rated for 12 to 110 volts. For this listing, part number ACX3436 is the main reference point. Listed voltage is 12 to 110. Listed output rating is 3. These details should still be checked against the original unit before ordering.\u003c\/p\u003e\n\u003ch4\u003eWhat current rating does it have?\u003c\/h4\u003e\n\u003cp\u003eThe switch is rated at 3 amps. For this listing, part number ACX3436 is the main reference point. Listed voltage is 12 to 110. Listed output rating is 3. These details should still be checked against the original unit before ordering.\u003c\/p\u003e\n\u003ch4\u003eIs the switch illuminated?\u003c\/h4\u003e\n\u003cp\u003eNo. The switch illumination is listed as non illuminated. For this listing, part number ACX3436 is the main reference point. Listed voltage is 12 to 110. Listed output rating is 3. These details should still be checked against the original unit before ordering.\u003c\/p\u003e\n\u003ch4\u003eWhat applications is it listed to suit?\u003c\/h4\u003e\n\u003cp\u003eIt is noted as suiting ACX3438PANEL and ACX3438METAL. For this listing, part number ACX3436 is the main reference point. Listed voltage is 12 to 110. Listed output rating is 3. These details should still be checked against the original unit before ordering.\u003c\/p\u003e\n\u003ch4\u003eWhat warranty is provided?\u003c\/h4\u003e\n\u003cp\u003eIt carries a one year warranty. For this listing, part number ACX3436 is the main reference point. Listed voltage is 12 to 110. Listed output rating is 3. These details should still be checked against the original unit before ordering.\u003c\/p\u003e","brand":"OEX","offers":[{"title":"Default Title","offer_id":56889092964512,"sku":"A5465144","price":19.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/5058\/0875\/files\/P4BQYPmN2njkSBQHRBR4bQ.jpg?v=1775127220","url":"https:\/\/www.micksgonebush.com.au\/products\/a5465144-oex-e-stop-contact-nc","provider":"Micks Gone Bush","version":"1.0","type":"link"}