{"product_id":"a5554182-genuine-starter-motor-12v-11th-autolite","title":"Genuine Starter Motor 12V 11TH Autolite Stop Start JB3Z11002E","description":"\u003cp\u003eThe Genuine Products starter motor listed here is a 12V unit for Autolite applications, identified by part number JB3Z11002E. It is an 11-tooth starter with a pad mount type, 89mm mount centres, 10.5mm mount hole diameter, and an overall length of 247mm.\u003c\/p\u003e\n\u003cp\u003eIt is a new unit, supplied by Genuine Products, with a one year warranty. The stated rotation is clockwise, the pinion diameter is 34.5mm, and the pinion at rest measurement is 25mm.\u003c\/p\u003e\n\u003cp\u003eWith a unit weight of 4.2kg and dry clutch configuration, this starter sits in the rotating electrical category and is intended for buyers who need a direct replacement checked against the exact part number and application details.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e12V starter motor\u003c\/li\u003e\n\u003cli\u003e11-tooth pinion\u003c\/li\u003e\n\u003cli\u003eAutolite unit make\u003c\/li\u003e\n\u003cli\u003eStop start applications only\u003c\/li\u003e\n\u003cli\u003eExtended spline shaft drive\u003c\/li\u003e\n\u003cli\u003ePad mount type\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePart No.: JB3Z11002E\u003c\/li\u003e\n\u003cli\u003eBrand: Genuine Products\u003c\/li\u003e\n\u003cli\u003eType: Starter motor\u003c\/li\u003e\n\u003cli\u003eVoltage: 12V\u003c\/li\u003e\n\u003cli\u003eNumber of Teeth: 11\u003c\/li\u003e\n\u003cli\u003eSuits Unit Make: Autolite\u003c\/li\u003e\n\u003cli\u003eStarter Mount Type: Pad\u003c\/li\u003e\n\u003cli\u003eRotation: CW\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVerified fitment references\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFord Everest\u003c\/li\u003e\n\u003cli\u003eFord Ranger\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication and Buying Notes\u003c\/h3\u003e\n\u003cp\u003eBefore ordering, confirm the part number JB3Z11002E against the starter removed from the vehicle or the vehicle parts catalogue. The listed dimensions are specific: 12V, 11 teeth, 89mm mount centres, 10.5mm mount hole diameter, 247mm overall length, and a 34.5mm pinion diameter.\u003c\/p\u003e\n\u003cp\u003eThis starter is described for Autolite applications and uses a pad mount with clockwise rotation. Those application details should be checked carefully before purchase, especially if the replacement is being matched by appearance alone.\u003c\/p\u003e\n\u003cp\u003eIf you are comparing against an existing unit, the pinion at rest measurement of 25mm, the dry clutch setup, and the 4.2kg weight can help confirm you are looking at the same style of starter. Matching these details reduces the chance of ordering the wrong part.\u003c\/p\u003e\n\u003cp\u003eThe verified fitment references supplied with this product include Ford Everest and Ford Ranger. That is a useful guide, but the safest approach is still to check the exact application, year, engine configuration where relevant, and the part number on the vehicle or old unit.\u003c\/p\u003e\n\u003cp\u003eBefore supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.\u003c\/p\u003e\n\u003cp\u003eFor workshop, fleet, and equipment applications, accurate identification of part number JB3Z11002E helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.\u003c\/p\u003e\n\u003cp\u003eRelevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty One Year, Mount Hole Diameter 10.5, Overall Length 247mm, Pinion Diameter 34.5mm, Suits Unit Make Autolite, Note STOP START APPLICATIONS ONLY - DRIVE HAS EXTENDED SPLINE SHAFT, Starter Mount Type Pad, Weight 4.2kg.\u003c\/p\u003e\n\u003cp\u003eAdditional published details for cross-checking include Product Group 1 ROTATING ELECTRICAL, Part No. JB3Z11002E, Brand GENUINE PRODUCTS, Description Genuine Starter Motor 12V 11Th Autolite Stop Start, Mount Centres A 89mm, Number of Teeth 11, Pinion at Rest 25mm, Rotation CW, Voltage 12, New \/ Reman. New.\u003c\/p\u003e\n\u003cp\u003eGenuine Starter Motor 12V 11Th Autolite Stop Start. Part number JB3Z11002E should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.\u003c\/p\u003e\n\u003cp\u003eFor part number JB3Z11002E, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.\u003c\/p\u003e\n\u003cp\u003eFor a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.\u003c\/p\u003e\n\u003cp\u003eAvailable application references include FORD EVEREST, FORD EVEREST 2018, FORD EVEREST 2019, FORD EVEREST 2020. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility note:\u003c\/strong\u003e Confirm fitment using part number JB3Z11002E, the stop start application note, and the listed dimensions before ordering. Ford Everest and Ford Ranger are referenced, but exact compatibility should be checked against the vehicle application and the original starter details.\u003c\/p\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003ch4\u003eWhat type of starter motor is this?\u003c\/h4\u003e\n\u003cp\u003eIt is a Genuine Products starter motor, 12V, with an 11-tooth pinion and pad mount type. For this listing, part number JB3Z11002E is the main reference point. Listed voltage is 12. Published fitment references include FORD EVEREST, FORD EVEREST 2018, FORD EVEREST 2019. These details should still be checked against the original unit before ordering.\u003c\/p\u003e\n\u003ch4\u003eWhat part number should I match?\u003c\/h4\u003e\n\u003cp\u003eThe listed part number is JB3Z11002E. Matching that number is the safest way to confirm you are ordering the correct unit. For this listing, part number JB3Z11002E is the main reference point. Listed voltage is 12. Published fitment references include FORD EVEREST, FORD EVEREST 2018, FORD EVEREST 2019. These details should still be checked against the original unit before ordering.\u003c\/p\u003e\n\u003ch4\u003eIs this starter for standard applications?\u003c\/h4\u003e\n\u003cp\u003eNo. It is listed for stop start applications only and has an extended spline shaft drive. For this listing, part number JB3Z11002E is the main reference point. Listed voltage is 12. Published fitment references include FORD EVEREST, FORD EVEREST 2018, FORD EVEREST 2019. These details should still be checked against the original unit before ordering.\u003c\/p\u003e\n\u003ch4\u003eWhat are the main dimensions?\u003c\/h4\u003e\n\u003cp\u003eThe listed dimensions are 247mm overall length, 89mm mount centres, 10.5mm mount hole diameter, and a 34.5mm pinion diameter. For this listing, part number JB3Z11002E is the main reference point. Listed voltage is 12. Published fitment references include FORD EVEREST, FORD EVEREST 2018, FORD EVEREST 2019. These details should still be checked against the original unit before ordering.\u003c\/p\u003e\n\u003ch4\u003eWhich vehicles are referenced for fitment?\u003c\/h4\u003e\n\u003cp\u003eThe supplied fitment references include Ford Everest and Ford Ranger. For this listing, part number JB3Z11002E is the main reference point. Listed voltage is 12. Published fitment references include FORD EVEREST, FORD EVEREST 2018, FORD EVEREST 2019. These details should still be checked against the original unit before ordering.\u003c\/p\u003e\n\u003ch4\u003eWhat warranty is included?\u003c\/h4\u003e\n\u003cp\u003eThe warranty listed is one year. For this listing, part number JB3Z11002E is the main reference point. Listed voltage is 12. Published fitment references include FORD EVEREST, FORD EVEREST 2018, FORD EVEREST 2019. These details should still be checked against the original unit before ordering.\u003c\/p\u003e","brand":"GENUINE PRODUCTS","offers":[{"title":"Default Title","offer_id":56888877777056,"sku":"A5554182","price":1367.6,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/5058\/0875\/files\/M9Jix4hXDXG1ROvdkJp6sA_f1126360-b281-44cc-ba31-1bc02f79544d.jpg?v=1775124407","url":"https:\/\/www.micksgonebush.com.au\/products\/a5554182-genuine-starter-motor-12v-11th-autolite","provider":"Micks Gone Bush","version":"1.0","type":"link"}