{"product_id":"a5568853-drivetech-4x4-oe-style-push-button-switc","title":"Drivetech 4X4 OE Style Push Button Switch 12V 3A 21MM X 21MM DT-11108 Toyota","description":"\u003cp\u003eThe Drivetech 4x4 OE Style Push Button Switch is a 12V, 3A switch with an ON-OFF SPST action and blue LED illumination. It is listed under part number DT-11108 and is sized at 21mm x 21mm, which makes the mounting dimensions a key check before purchase.\u003c\/p\u003e\n\u003cp\u003eIt is described as suitable for Toyota applications, with supplied fitment references for Prado 150 series 2019-current, Hiace 2019-current, and Rav4 2019-current. If you are replacing an existing dash switch or adding a driving light control, matching the 21mm x 21mm mount opening and the wiring layout is essential.\u003c\/p\u003e\n\u003cp\u003eThe wiring code is supplied as Black for earth, Blue for dash light circuit optional, Red for 12V input, and Green for 12V output. Those wire functions matter during installation because the switch has a specific 12V electrical setup and a 3A power rating, so it should be matched to the intended circuit before fitting.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOE style push button switch\u003c\/li\u003e\n\u003cli\u003e12V system\u003c\/li\u003e\n\u003cli\u003e3A power rating\u003c\/li\u003e\n\u003cli\u003eBlue LED illumination\u003c\/li\u003e\n\u003cli\u003eON-OFF SPST switch action\u003c\/li\u003e\n\u003cli\u003e21mm x 21mm mount size\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Drivetech 4x4\u003c\/li\u003e\n\u003cli\u003eProduct type: Switch\u003c\/li\u003e\n\u003cli\u003eSwitch type: Push\u003c\/li\u003e\n\u003cli\u003eSwitch action: On - Off - SPST\u003c\/li\u003e\n\u003cli\u003eVoltage: 12V\u003c\/li\u003e\n\u003cli\u003ePower rating: 3A\u003c\/li\u003e\n\u003cli\u003eSwitch illumination: Blue LED\u003c\/li\u003e\n\u003cli\u003eMount width: 21mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eConfirmed application guidance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eToyota Prado 150 series 2019-current\u003c\/li\u003e\n\u003cli\u003eToyota Hiace 2019-current\u003c\/li\u003e\n\u003cli\u003eToyota Rav4 2019-current\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication and Buying Notes\u003c\/h3\u003e\n\u003cp\u003eCheck the mount opening first: this switch is listed at 21mm x 21mm, so the dash or panel cut-out needs to suit that size. A correct physical fit is just as important as the electrical side, especially where the switch is being used as an OE-style replacement or a clean aftermarket addition.\u003c\/p\u003e\n\u003cp\u003eThe electrical specification is also important. With a 12V rating and 3A power rating, this switch is suited to lower-current control circuits rather than heavier loads. The supplied wiring code should be followed carefully: Black is earth, Blue is for dash light circuit if used, Red is 12V input, and Green is 12V output.\u003c\/p\u003e\n\u003cp\u003eIf you are matching an existing Toyota switch panel, compare the part number DT-11108, the 21mm x 21mm mounting size, and the ON-OFF SPST action with your current setup. Those details are the most practical way to reduce the chance of ordering the wrong switch for the job.\u003c\/p\u003e\n\u003cp\u003eBlue LED illumination is included, which may be useful where a lit switch is preferred for night visibility in the cabin. Whether the dash light circuit is connected or left unused, the switch still needs to be wired in line with the intended application and the 12V system it will operate on.\u003c\/p\u003e\n\u003cp\u003eBefore supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.\u003c\/p\u003e\n\u003cp\u003eFor workshop, fleet, and equipment applications, accurate identification of part number DT-11108 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.\u003c\/p\u003e\n\u003cp\u003eRelevant published details for this unit include Type SWITCH, Unit of Measure EACH, Warranty One Year, Power Rating (Amp) 3, Voltage 12V, Switch Type Push, Switch Illumination Blue LED Illumination, Product Group 1 AUTO ELEC ACCESSORIES, Part No. DT-11108, Brand DRIVETECH 4X4.\u003c\/p\u003e\n\u003cp\u003eAdditional published details for cross-checking include Description Drivetech 4x4 OE Style Push Button Switch Driving Light, Suits Toyota, Mount Width 21mm, Switch Action On - Off - SPST, Mount Length 21mm, Item Type Switch, Product Group 2 FUSES BREAKERS RELAYS SWITCHES.\u003c\/p\u003e\n\u003cp\u003eDrivetech 4x4 OE Style Push Button Switch Driving Light, Suits Toyota. Part number DT-11108 should be checked first. Listed voltage is 12V. Listed output rating is 3. These details form the core reference points used by parts interpreters when confirming the correct replacement.\u003c\/p\u003e\n\u003cp\u003eFor part number DT-11108, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.\u003c\/p\u003e\n\u003cp\u003eFor a switch in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12V and output 3 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.\u003c\/p\u003e\n\u003cp\u003eWhere no verified application list is available, the part number, mounting details, connector style, and published specifications should be used as the primary selection criteria.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility note:\u003c\/strong\u003e Confirm fitment by checking part number DT-11108, the 21mm x 21mm mount size, the 12V 3A rating, and the Toyota application details before ordering.\u003c\/p\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003ch4\u003eWhat is the part number for this switch?\u003c\/h4\u003e\n\u003cp\u003eThe part number supplied is DT-11108. For this listing, part number DT-11108 is the main reference point. Listed voltage is 12V. Listed output rating is 3. These details should still be checked against the original unit before ordering.\u003c\/p\u003e\n\u003ch4\u003eWhat voltage does this switch use?\u003c\/h4\u003e\n\u003cp\u003eIt is a 12V switch. For this listing, part number DT-11108 is the main reference point. Listed voltage is 12V. Listed output rating is 3. These details should still be checked against the original unit before ordering.\u003c\/p\u003e\n\u003ch4\u003eWhat is the current rating?\u003c\/h4\u003e\n\u003cp\u003eThe stated power rating is 3A. For this listing, part number DT-11108 is the main reference point. Listed voltage is 12V. Listed output rating is 3. These details should still be checked against the original unit before ordering.\u003c\/p\u003e\n\u003ch4\u003eWhat size mounting hole does it need?\u003c\/h4\u003e\n\u003cp\u003eThe listed mount width and mount length are both 21mm, so the opening should suit 21mm x 21mm. For this listing, part number DT-11108 is the main reference point. Listed voltage is 12V. Listed output rating is 3. These details should still be checked against the original unit before ordering.\u003c\/p\u003e\n\u003ch4\u003eWhich vehicles are listed as compatible?\u003c\/h4\u003e\n\u003cp\u003eThe supplied fitment references are Toyota Prado 150 series 2019-current, Hiace 2019-current, and Rav4 2019-current. For this listing, part number DT-11108 is the main reference point. Listed voltage is 12V. Listed output rating is 3. These details should still be checked against the original unit before ordering.\u003c\/p\u003e\n\u003ch4\u003eWhat does the wiring code mean?\u003c\/h4\u003e\n\u003cp\u003eThe listed wiring code is Black for earth, Blue for dash light circuit optional, Red for 12V input, and Green for 12V output. For this listing, part number DT-11108 is the main reference point. Listed voltage is 12V. Listed output rating is 3. These details should still be checked against the original unit before ordering.\u003c\/p\u003e","brand":"DRIVETECH 4X4","offers":[{"title":"Default Title","offer_id":56889058590880,"sku":"A5568853","price":37.7,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/5058\/0875\/files\/GqH9o0NGVbs-jp4yIPgQg.jpg?v=1775127011","url":"https:\/\/www.micksgonebush.com.au\/products\/a5568853-drivetech-4x4-oe-style-push-button-switc","provider":"Micks Gone Bush","version":"1.0","type":"link"}