{"product_id":"a5582513-oex-alternator-12v-80a-denso-style","title":"OEX Alternator 12V 80A Denso Style DXA4125RTE","description":"\u003cp\u003eThe OEX Alternator DXA4125RTE is a new 12V, 80 amp alternator in Denso style, supplied as each unit. It uses a single leg alternator mount with 160mm mount centre to centre, a 58mm mount leg thickness, and an M8 x 1.25 adjusting hole diameter, so the physical mounting points need to match the vehicle application before ordering.\u003c\/p\u003e\n\u003cp\u003eThis unit is fitted with an internal regulator and an AA section pulley with a 78mm outside diameter. Those details matter when replacing an existing alternator, because pulley profile, mounting style, and regulator type all need to align with the vehicle’s charging system and belt setup.\u003c\/p\u003e\n\u003cp\u003eOEX identifies this alternator as suitable for Denso units, with a pin code of IR11 and a note that it suits SLEEPER CAB air conditioning applications only. That application note should be checked carefully against the vehicle and the existing alternator arrangement before purchase.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e12V alternator with 80 amp power rating\u003c\/li\u003e\n\u003cli\u003eNew unit, supplied each\u003c\/li\u003e\n\u003cli\u003eDenso style unit\u003c\/li\u003e\n\u003cli\u003eInternal regulator\u003c\/li\u003e\n\u003cli\u003eSingle leg alternator mount\u003c\/li\u003e\n\u003cli\u003eAA section pulley\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: OEX\u003c\/li\u003e\n\u003cli\u003ePart number: DXA4125RTE\u003c\/li\u003e\n\u003cli\u003eProduct type: Alternator\u003c\/li\u003e\n\u003cli\u003eVoltage: 12V\u003c\/li\u003e\n\u003cli\u003ePower rating: 80A\u003c\/li\u003e\n\u003cli\u003eNew \/ remanufactured: New\u003c\/li\u003e\n\u003cli\u003eSuits unit make: Denso\u003c\/li\u003e\n\u003cli\u003eAlternator mount: Single leg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication and Buying Notes\u003c\/h3\u003e\n\u003cp\u003eBefore buying, compare the part number DXA4125RTE with the alternator already fitted to the vehicle. The key hardware details to check are the single leg mount, 160mm mount centre to centre, 58mm mount leg thickness, and the M8 x 1.25 adjusting hole. If any of those points differ, the alternator may not physically suit the application.\u003c\/p\u003e\n\u003cp\u003eThe pulley details also need attention. This alternator uses an AA section pulley with a 78mm outside diameter, so belt type and pulley profile must be matched carefully. A mismatch here can cause belt tracking issues or prevent correct installation, even if the electrical rating appears suitable.\u003c\/p\u003e\n\u003cp\u003eElectrically, this is a 12V, 80A unit with an internal regulator. That makes it important to confirm the charging system arrangement on the vehicle rather than relying only on the general description. The supplied note also narrows the application to SLEEPER CAB air conditioning applications only, so that usage detail should be verified against the vehicle specification.\u003c\/p\u003e\n\u003cp\u003eIf you are replacing an existing Denso-style alternator, check the pin code IR11 and compare the original connector and mount arrangement as well as the physical dimensions. These checks are the most reliable way to reduce the risk of ordering the wrong unit, particularly when the vehicle may have multiple alternator configurations.\u003c\/p\u003e\n\u003cp\u003eBefore supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.\u003c\/p\u003e\n\u003cp\u003eFor workshop, fleet, and equipment applications, accurate identification of part number DXA4125RTE helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.\u003c\/p\u003e\n\u003cp\u003eRelevant published details for this unit include Type ALTERNATOR, Unit of Measure EACH, Warranty One Year, Mount Leg Thickness 58mm, Power Rating (Amp) 80, Pulley Section AA, Suits Unit Make Denso, Note SLEEPER CAB Air Conditioning applications only, Mount Cnt to Cnt 160mm.\u003c\/p\u003e\n\u003cp\u003eAdditional published details for cross-checking include Product Group 2 ALTERNATORS, Part No. DXA4125RTE, Brand OEX, Description OEX Alternator 12V 80A Denso Style, Adjusting Hole Diameter M8 x 1.25, Pin Code IR11, Pulley Outside Diameter 78mm, Regulator Type Internal, Voltage 12, Alternator Mount Single Leg.\u003c\/p\u003e\n\u003cp\u003eOEX Alternator 12V 80A Denso Style. Part number DXA4125RTE should be checked first. Listed voltage is 12. Listed output rating is 80. These details form the core reference points used by parts interpreters when confirming the correct replacement.\u003c\/p\u003e\n\u003cp\u003eMount style is Single Leg. Regulator type is Internal. Pulley configuration is AA. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.\u003c\/p\u003e\n\u003cp\u003eFor part number DXA4125RTE, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.\u003c\/p\u003e\n\u003cp\u003eFor a alternator in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 and output 80 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility note:\u003c\/strong\u003e Confirm fitment by matching part number DXA4125RTE, Denso style application details, the IR11 pin code, and the listed mounting and pulley measurements to the unit already fitted to the vehicle. The application note states SLEEPER CAB air conditioning applications only.\u003c\/p\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003ch4\u003eWhat is the part number for this alternator?\u003c\/h4\u003e\n\u003cp\u003eThe part number is DXA4125RTE. For this listing, part number DXA4125RTE is the main reference point. Listed voltage is 12. Listed output rating is 80. These details should still be checked against the original unit before ordering.\u003c\/p\u003e\n\u003ch4\u003eIs this alternator new or remanufactured?\u003c\/h4\u003e\n\u003cp\u003eIt is a new alternator. For this listing, part number DXA4125RTE is the main reference point. Listed voltage is 12. Listed output rating is 80. These details should still be checked against the original unit before ordering.\u003c\/p\u003e\n\u003ch4\u003eWhat is the output rating?\u003c\/h4\u003e\n\u003cp\u003eIt is rated at 80 amps and operates on 12V. For this listing, part number DXA4125RTE is the main reference point. Listed voltage is 12. Listed output rating is 80. These details should still be checked against the original unit before ordering.\u003c\/p\u003e\n\u003ch4\u003eWhat type of regulator does it use?\u003c\/h4\u003e\n\u003cp\u003eIt uses an internal regulator. For this listing, part number DXA4125RTE is the main reference point. Listed voltage is 12. Listed output rating is 80. These details should still be checked against the original unit before ordering.\u003c\/p\u003e\n\u003ch4\u003eWhat mounting style does it have?\u003c\/h4\u003e\n\u003cp\u003eIt has a single leg alternator mount, with 160mm mount centre to centre and a 58mm mount leg thickness. For this listing, part number DXA4125RTE is the main reference point. Listed voltage is 12. Listed output rating is 80. These details should still be checked against the original unit before ordering.\u003c\/p\u003e\n\u003ch4\u003eAre there any application limits noted?\u003c\/h4\u003e\n\u003cp\u003eYes. The note states SLEEPER CAB air conditioning applications only, so that application detail should be confirmed before purchase. For this listing, part number DXA4125RTE is the main reference point. Listed voltage is 12. Listed output rating is 80. These details should still be checked against the original unit before ordering.\u003c\/p\u003e","brand":"OEX","offers":[{"title":"Default Title","offer_id":56888704729248,"sku":"A5582513","price":903.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/5058\/0875\/files\/CGbBnLKooikWVpccSiLKwQ_ce4f228f-12c5-449b-bd15-1f0d03460ec9.jpg?v=1775121684","url":"https:\/\/www.micksgonebush.com.au\/products\/a5582513-oex-alternator-12v-80a-denso-style","provider":"Micks Gone Bush","version":"1.0","type":"link"}