{"product_id":"a5634952-mahle-alternator-24v-110a","title":"Mahle Alternator 24V 110A MG802","description":"\u003cp\u003eThe MAHLE alternator listed here is a 24V, 110A unit under part number MG802. It is supplied as a new alternator, not remanufactured, and it uses a twin leg alternator mount with inside mounting legs measured at 106mm.\u003c\/p\u003e\n\u003cp\u003eThis unit is specified with an 8 groove pulley, a pulley outside diameter of 61mm, a 13mm pivot hole diameter, and clockwise rotation. Those are the key physical checks to compare against the existing alternator before ordering, especially where mounting brackets and belt alignment need to match closely.\u003c\/p\u003e\n\u003cp\u003eA multi function regulator is noted, and the pin code is IR98. The alternator is described as MAHLE brand, with compliance to international standards for electromagnetic compatibility, manufacture using the latest technologies and materials, and ISO 9001 certification.\u003c\/p\u003e\n\u003cp\u003eFor workshop planning and replacement matching, the important identifiers are the 24V system voltage, 110A output, MG802 part number, and the twin leg mounting arrangement. If any of those differ from the unit already fitted, confirmation is needed before purchase.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e24V alternator with 110A output\u003c\/li\u003e\n\u003cli\u003eNew unit supplied each\u003c\/li\u003e\n\u003cli\u003eMAHLE brand\u003c\/li\u003e\n\u003cli\u003ePart number MG802\u003c\/li\u003e\n\u003cli\u003eTwin leg alternator mount\u003c\/li\u003e\n\u003cli\u003e8 groove pulley\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVoltage: 24V\u003c\/li\u003e\n\u003cli\u003ePower rating: 110A\u003c\/li\u003e\n\u003cli\u003ePart number: MG802\u003c\/li\u003e\n\u003cli\u003eBrand: MAHLE\u003c\/li\u003e\n\u003cli\u003eType: Alternator\u003c\/li\u003e\n\u003cli\u003eCondition: New\u003c\/li\u003e\n\u003cli\u003eUnit of measure: Each\u003c\/li\u003e\n\u003cli\u003eAlternator mount: Twin leg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication and Buying Notes\u003c\/h3\u003e\n\u003cp\u003eBefore ordering, compare the MG802 part number, the 24V voltage, and the 110A output against the alternator currently fitted. Those three details are the quickest way to avoid a mismatch when replacing a unit in the charging system.\u003c\/p\u003e\n\u003cp\u003eMounting and belt drive dimensions matter on alternators as much as electrical output. This unit has a twin leg mount, 106mm inside mounting legs, a 13mm pivot hole diameter, an 8 groove pulley, and a 61mm pulley outside diameter, so the physical fit should be checked carefully against the existing unit and bracket layout.\u003c\/p\u003e\n\u003cp\u003eThe clockwise rotation and IR98 pin code are also important identifiers. If the current alternator differs in rotation, connector arrangement, or regulator style, do not assume interchangeability without checking the application details first.\u003c\/p\u003e\n\u003cp\u003eBecause fitment data has not been supplied, the safest approach is to match by part number and by the measured details listed here. If you are unsure, compare the old unit side by side with the new one before installation, especially where pulley alignment, mounting spacing, and connector position affect the job.\u003c\/p\u003e\n\u003cp\u003eBefore supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.\u003c\/p\u003e\n\u003cp\u003eFor workshop, fleet, and equipment applications, accurate identification of part number MG802 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.\u003c\/p\u003e\n\u003cp\u003eRelevant published details for this unit include Type ALTERNATOR, Unit of Measure EACH, Warranty One Year, Pin Code IR98, Power Rating (Amp) 110, Pulley Section 8 Groove, Suits Unit Make Mahle, Note Multi function regulator, New \/ Reman. New, Product Group 1 ROTATING ELECTRICAL.\u003c\/p\u003e\n\u003cp\u003eAdditional published details for cross-checking include Part No. MG802, Brand MAHLE, Description Mahle Alternator 24V 110A, Inside Mounting Legs 106mm, Pivot Hole Diameter 13, Pulley Outside Diameter 61mm, Rotation CW, Voltage 24, Alternator Mount Twin Leg.\u003c\/p\u003e\n\u003cp\u003eMahle Alternator 24V 110A. Part number MG802 should be checked first. Listed voltage is 24. Listed output rating is 110. These details form the core reference points used by parts interpreters when confirming the correct replacement.\u003c\/p\u003e\n\u003cp\u003eMount style is Twin Leg. Pulley configuration is 8 Groove. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.\u003c\/p\u003e\n\u003cp\u003eFor part number MG802, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.\u003c\/p\u003e\n\u003cp\u003eFor a alternator in workshop, fleet, trade, agricultural, or construction service, the listed voltage 24 and output 110 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility note:\u003c\/strong\u003e Confirm compatibility using the MG802 part number, 24V system voltage, 110A output, twin leg mount, 106mm inside mounting legs, 13mm pivot hole diameter, 8 groove pulley, 61mm pulley outside diameter, clockwise rotation, and IR98 pin code before ordering.\u003c\/p\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003ch4\u003eWhat is the part number for this alternator?\u003c\/h4\u003e\n\u003cp\u003eThe part number is MG802. For this listing, part number MG802 is the main reference point. Listed voltage is 24. Listed output rating is 110. These details should still be checked against the original unit before ordering.\u003c\/p\u003e\n\u003ch4\u003eWhat voltage and output does it have?\u003c\/h4\u003e\n\u003cp\u003eIt is a 24V alternator with a 110A power rating. For this listing, part number MG802 is the main reference point. Listed voltage is 24. Listed output rating is 110. These details should still be checked against the original unit before ordering.\u003c\/p\u003e\n\u003ch4\u003eIs this alternator new or remanufactured?\u003c\/h4\u003e\n\u003cp\u003eIt is listed as new. For this listing, part number MG802 is the main reference point. Listed voltage is 24. Listed output rating is 110. These details should still be checked against the original unit before ordering.\u003c\/p\u003e\n\u003ch4\u003eWhat mounting setup does it use?\u003c\/h4\u003e\n\u003cp\u003eIt uses a twin leg alternator mount with inside mounting legs measured at 106mm and a 13mm pivot hole diameter. For this listing, part number MG802 is the main reference point. Listed voltage is 24. Listed output rating is 110. These details should still be checked against the original unit before ordering.\u003c\/p\u003e\n\u003ch4\u003eWhat pulley details are listed?\u003c\/h4\u003e\n\u003cp\u003eThe pulley is listed as 8 groove, with a pulley outside diameter of 61mm. For this listing, part number MG802 is the main reference point. Listed voltage is 24. Listed output rating is 110. These details should still be checked against the original unit before ordering.\u003c\/p\u003e\n\u003ch4\u003eDoes the listing include a warranty?\u003c\/h4\u003e\n\u003cp\u003eYes. The listed warranty is one year. For this listing, part number MG802 is the main reference point. Listed voltage is 24. Listed output rating is 110. These details should still be checked against the original unit before ordering.\u003c\/p\u003e","brand":"MAHLE","offers":[{"title":"Default Title","offer_id":56888700141728,"sku":"A5634952","price":873.6,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/5058\/0875\/files\/qTebi4EGuUIcnzaE-_6xng_ce0071ad-039b-4367-b271-7be463fcf1fc.jpg?v=1775121541","url":"https:\/\/www.micksgonebush.com.au\/products\/a5634952-mahle-alternator-24v-110a","provider":"Micks Gone Bush","version":"1.0","type":"link"}