{"product_id":"a5640429-oex-alternator-12v-80a-denso-style","title":"OEX Alternator 12V 80A Denso Style DXA4150","description":"\u003cp\u003eThe OEX Alternator DXA4150 is a new 12V 80A unit built in a Denso style with an internal regulator. It suits applications that call for a twin leg alternator mount, 42mm inside mounting legs, and a 4 groove pulley arrangement, so checking the physical mount and pulley setup before ordering is essential.\u003c\/p\u003e\n\u003cp\u003eThis alternator is supplied as an each unit and carries a listed weight of 4.2kg. Key identifying details include part number DXA4150, pin code IR116, adjusting hole diameter M8x1.25, mount centre to centre 160mm, and pulley outside diameter 57.5mm. Those measurements are the practical checkpoints that matter when matching a replacement alternator.\u003c\/p\u003e\n\u003cp\u003eOEX states its products are sourced from market leading Original Equipment Manufacturers and aftermarket suppliers, with ISO9001 certified factory support for engineering, testing and quality control procedures. The listed warranty is 3 years for passenger use and 1 year for commercial use, which gives a clear reference point when selecting the correct replacement for a compatible Denso style application.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNew alternator, not remanufactured\u003c\/li\u003e\n\u003cli\u003e12V output with 80A power rating\u003c\/li\u003e\n\u003cli\u003eDenso style unit\u003c\/li\u003e\n\u003cli\u003eTwin leg alternator mount\u003c\/li\u003e\n\u003cli\u003eInternal regulator\u003c\/li\u003e\n\u003cli\u003e4 groove pulley\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: OEX\u003c\/li\u003e\n\u003cli\u003eProduct type: Alternator\u003c\/li\u003e\n\u003cli\u003ePart No.: DXA4150\u003c\/li\u003e\n\u003cli\u003eVoltage: 12V\u003c\/li\u003e\n\u003cli\u003eOutput: 80A\u003c\/li\u003e\n\u003cli\u003eNew \/ reman.: New\u003c\/li\u003e\n\u003cli\u003eSuits unit make: Denso\u003c\/li\u003e\n\u003cli\u003eAlternator mount: Twin leg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment guidance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFitment data supplied shows Toyota Ractis applications, including 2005, 2006, 2007, 2008, 2009 and 2010 model references.\u003c\/li\u003e\n\u003cli\u003eFitment is listed against Toyota and Toyota Ractis in the provided application data.\u003c\/li\u003e\n\u003cli\u003eAlways confirm the alternator mount, pulley section, and part number before ordering, as the listed measurements must match the vehicle setup.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication and Buying Notes\u003c\/h3\u003e\n\u003cp\u003eThis alternator should be checked against the vehicle’s existing mount and pulley arrangement before purchase. The key physical identifiers are the twin leg mount, 42mm inside mounting legs, 160mm mount centre to centre, M8x1.25 adjusting hole, and 4 groove pulley with a 57.5mm outside diameter. If any of those dimensions differ from the fitted unit, the part should not be assumed correct.\u003c\/p\u003e\n\u003cp\u003eThe Denso style designation matters because alternators can look similar while still using different mounting points, pulley sections, or regulator types. Here the regulator is internal, the unit is 12V, and the output is 80A, so the replacement should be matched to the electrical requirement as well as the physical fit. Checking the pin code IR116 is also worthwhile when comparing connectors and applications.\u003c\/p\u003e\n\u003cp\u003eThe listed fitment references Toyota Ractis across 2005 through 2010 in the supplied application data. Even with that guidance, it is still best practice to compare the vehicle’s existing alternator details, part number DXA4150, and any visible mount or pulley markings before ordering. That is particularly important where the vehicle has been modified, repaired, or fitted with a non-original charging system.\u003c\/p\u003e\n\u003cp\u003eAs with any charging system component, condition of the battery, belt, wiring, and connectors should be checked during installation. A new alternator with an 80A rating can only operate correctly when the rest of the system is in sound condition, so a replacement should be fitted with care and verified once installed.\u003c\/p\u003e\n\u003cp\u003eBefore supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.\u003c\/p\u003e\n\u003cp\u003eFor workshop, fleet, and equipment applications, accurate identification of part number DXA4150 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.\u003c\/p\u003e\n\u003cp\u003eRelevant published details for this unit include Type ALTERNATOR, Unit of Measure EACH, Warranty 3yr Passenger 1yr Commercial, Inside Mounting Legs 42mm, Power Rating (Amp) 80, Pulley Section 4 Groove, Suits Unit Make Denso, Alternator Mount Twin Leg, New \/ Reman. New.\u003c\/p\u003e\n\u003cp\u003eAdditional published details for cross-checking include Product Group 2 ALTERNATORS, Part No. DXA4150, Brand OEX, Description OEX Alternator 12V 80A Denso Style, Adjusting Hole Diameter M8x1.25, Pin Code IR116, Pulley Outside Diameter 57.5mm, Regulator Type Internal, Voltage 12, Mount Cnt to Cnt 160mm.\u003c\/p\u003e\n\u003cp\u003eOEX Alternator 12V 80A Denso Style. Part number DXA4150 should be checked first. Listed voltage is 12. Listed output rating is 80. These details form the core reference points used by parts interpreters when confirming the correct replacement.\u003c\/p\u003e\n\u003cp\u003eMount style is Twin Leg. Regulator type is Internal. Pulley configuration is 4 Groove. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.\u003c\/p\u003e\n\u003cp\u003eFor part number DXA4150, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.\u003c\/p\u003e\n\u003cp\u003eFor a alternator in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 and output 80 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.\u003c\/p\u003e\n\u003cp\u003eAvailable application references include TOYOTA RACTIS, TOYOTA RACTIS 2005, TOYOTA RACTIS 2006, TOYOTA RACTIS 2007. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility note:\u003c\/strong\u003e Confirm fitment by comparing part number DXA4150, Denso style application details, twin leg mount measurements, pulley section, and the vehicle’s existing alternator before purchase. If the physical dimensions or connector details do not match, do not assume compatibility.\u003c\/p\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003ch4\u003eWhat is the part number for this alternator?\u003c\/h4\u003e\n\u003cp\u003eThe listed part number is DXA4150.\u003c\/p\u003e\n\u003ch4\u003eIs this alternator new or remanufactured?\u003c\/h4\u003e\n\u003cp\u003eIt is listed as new.\u003c\/p\u003e\n\u003ch4\u003eWhat voltage and output does it have?\u003c\/h4\u003e\n\u003cp\u003eIt is a 12V alternator with an 80A power rating.\u003c\/p\u003e\n\u003ch4\u003eWhat type of regulator does it use?\u003c\/h4\u003e\n\u003cp\u003eIt has an internal regulator.\u003c\/p\u003e\n\u003ch4\u003eWhat pulley setup does it use?\u003c\/h4\u003e\n\u003cp\u003eIt has a 4 groove pulley and a pulley outside diameter of 57.5mm.\u003c\/p\u003e\n\u003ch4\u003eWhat vehicles are shown in the supplied fitment data?\u003c\/h4\u003e\n\u003cp\u003eThe supplied fitment data references Toyota Ractis applications, including 2005 through 2010 model references.\u003c\/p\u003e","brand":"OEX","offers":[{"title":"Default Title","offer_id":56888698536096,"sku":"A5640429","price":513.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/5058\/0875\/files\/F27CqtPr39gPTnBs0sWIqg_225086c7-9f2b-49b0-a5a0-f4f2785e56c9.jpg?v=1775121496","url":"https:\/\/www.micksgonebush.com.au\/products\/a5640429-oex-alternator-12v-80a-denso-style","provider":"Micks Gone Bush","version":"1.0","type":"link"}