{"product_id":"a5675627-oex-alternator-12v-130a-denso-style-hig","title":"OEX Alternator 12V 130A Denso Style High Output DXA4173HO","description":"\u003cp\u003eThe OEX DXA4173HO is a new 12V alternator rated at 130A and built in a Denso style high output format. It is listed as a single leg alternator with an internal regulator, 7 groove pulley, 58mm mount leg thickness, and 160mm mount centre to centre.\u003c\/p\u003e\n\u003cp\u003eThis unit is intended as an upgrade from the original 90A setup to 130A high output, and the included cable and fuse are provided for the upgrade application. It is specifically listed for Isuzu D-MAX and MU-X CRDi 3.0L 4JJ1 applications within the stated build date range.\u003c\/p\u003e\n\u003cp\u003eThere is an important identification point to check before ordering: there are two identical looking alternators with different regulator functions. The correct unit should be confirmed by OE number, and the listed note states suitability from 07\/12 to 05\/16, while the description states 07\/12 to 06\/16.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e130A high output replacement alternator\u003c\/li\u003e\n\u003cli\u003e12V system\u003c\/li\u003e\n\u003cli\u003eDenso style unit\u003c\/li\u003e\n\u003cli\u003eInternal regulator\u003c\/li\u003e\n\u003cli\u003eSingle leg mount\u003c\/li\u003e\n\u003cli\u003eCable and fuse included for upgrade\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePart No.: DXA4173HO\u003c\/li\u003e\n\u003cli\u003eBrand: OEX\u003c\/li\u003e\n\u003cli\u003eType: Alternator\u003c\/li\u003e\n\u003cli\u003ePower rating: 130A\u003c\/li\u003e\n\u003cli\u003eVoltage: 12V\u003c\/li\u003e\n\u003cli\u003eRegulator type: Internal\u003c\/li\u003e\n\u003cli\u003eAlternator mount: Single leg\u003c\/li\u003e\n\u003cli\u003eMount leg thickness: 58mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIsuzu D-MAX CRDi 3.0L 4JJ1\u003c\/li\u003e\n\u003cli\u003eIsuzu MU-X CRDi 3.0L 4JJ1\u003c\/li\u003e\n\u003cli\u003eVehicle build date range listed: 07\/12 to 06\/16\u003c\/li\u003e\n\u003cli\u003eAlso noted as suit vehicle build date from 07\/12 to 05\/16 in the application note\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication and Buying Notes\u003c\/h3\u003e\n\u003cp\u003eBefore ordering, confirm the part number DXA4173HO and compare the OE number, because two visually similar alternators are noted and they use different regulator functions. The unit is a 12V, 130A alternator with an internal regulator, so the regulator type matters as much as the mounting shape.\u003c\/p\u003e\n\u003cp\u003eThe upgrade hardware included with this alternator is a cable and fuse, which suits the high output change from the original 90A arrangement to 130A. If the vehicle has had previous electrical modifications, check the existing charge cable arrangement and fuse setup against the supplied upgrade parts before installation.\u003c\/p\u003e\n\u003cp\u003ePhysical checks are just as important as vehicle make and model. Verify the single leg mount, 58mm mount leg thickness, 160mm mount centre to centre, M8x1.25 adjusting hole, 62.5mm pulley outside diameter, and 7 groove pulley section so the alternator matches the mounting and belt setup already on the vehicle.\u003c\/p\u003e\n\u003cp\u003eThis alternator is listed for Isuzu D-MAX and MU-X CRDi 3.0L 4JJ1 applications within the stated build date range, but the date note is given as 07\/12 to 06\/16 in one place and 07\/12 to 05\/16 in another. That makes confirmation against build date, OE number, and the existing alternator especially important before purchase.\u003c\/p\u003e\n\u003cp\u003eBefore supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.\u003c\/p\u003e\n\u003cp\u003eFor workshop, fleet, and equipment applications, accurate identification of part number DXA4173HO helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.\u003c\/p\u003e\n\u003cp\u003eRelevant published details for this unit include Type ALTERNATOR, Unit of Measure EACH, Warranty 3yr Passenger 1yr Commercial, Mount Leg Thickness 58mm, Pulley Outside Diameter 62.5mm, Regulator Type Internal, Voltage 12, Alternator Mount Single Leg, New \/ Reman. New, Weight 5.04kg.\u003c\/p\u003e\n\u003cp\u003eAdditional published details for cross-checking include Product Group 1 ROTATING ELECTRICAL, Part No. DXA4173HO, Brand OEX, Description OEX Alternator 12V 130A Denso Style (High Output) Suits Only 07\/12 to 06\/16, Adjusting Hole Diameter M8x1.25, Power Rating (Amp) 130, Pulley Section 7 Groove, Suits Unit Make Denso, Note One of two identical looking alternators, both with different regulator functions. Confirm by OE number. Suit vehicle build date from 07\/12 to 05\/16. Cable and fuse included for upgrade, Mount Cnt to Cnt 160mm.\u003c\/p\u003e\n\u003cp\u003eOEX Alternator 12V 130A Denso Style (High Output) Suits Only 07\/12 to 06\/16. Part number DXA4173HO should be checked first. Listed voltage is 12. Listed output rating is 130. These details form the core reference points used by parts interpreters when confirming the correct replacement.\u003c\/p\u003e\n\u003cp\u003eMount style is Single Leg. Regulator type is Internal. Pulley configuration is 7 Groove. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.\u003c\/p\u003e\n\u003cp\u003eFor part number DXA4173HO, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.\u003c\/p\u003e\n\u003cp\u003eFor a alternator in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 and output 130 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.\u003c\/p\u003e\n\u003cp\u003eAvailable application references include ISUZU D-MAX, ISUZU D-MAX 2012, ISUZU D-MAX 2013, ISUZU D-MAX 2014. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility note:\u003c\/strong\u003e Confirm fitment by checking DXA4173HO, the OE number, regulator type, mounting dimensions, pulley details, and your vehicle build date before ordering. Where the vehicle sits close to the listed date range or has had prior alternator changes, compare the original unit carefully.\u003c\/p\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003ch4\u003eWhat vehicle applications are listed for this alternator?\u003c\/h4\u003e\n\u003cp\u003eIt is listed for Isuzu D-MAX and MU-X CRDi 3.0L 4JJ1 applications within the stated build date range.\u003c\/p\u003e\n\u003ch4\u003eWhat is the output rating of this alternator?\u003c\/h4\u003e\n\u003cp\u003eThe alternator is rated at 130A and is described as a high output replacement from the original 90A setup.\u003c\/p\u003e\n\u003ch4\u003eIs this a new or remanufactured alternator?\u003c\/h4\u003e\n\u003cp\u003eIt is listed as new.\u003c\/p\u003e\n\u003ch4\u003eDoes it have an internal or external regulator?\u003c\/h4\u003e\n\u003cp\u003eIt has an internal regulator.\u003c\/p\u003e\n\u003ch4\u003eWhat belt and pulley details are listed?\u003c\/h4\u003e\n\u003cp\u003eThe alternator has a 7 groove pulley and a pulley outside diameter of 62.5mm.\u003c\/p\u003e\n\u003ch4\u003eWhat should be checked before ordering?\u003c\/h4\u003e\n\u003cp\u003eCheck the part number DXA4173HO, the OE number, regulator function, build date, and the mounting dimensions because two similar alternators are noted with different regulator functions.\u003c\/p\u003e","brand":"OEX","offers":[{"title":"Default Title","offer_id":56888692801696,"sku":"A5675627","price":835.9,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/5058\/0875\/files\/Y9rWil5pxbZpYGA8M0QwTg_e49f17cf-2ca8-45bf-98b5-9962879a1ac2.jpg?v=1775121342","url":"https:\/\/www.micksgonebush.com.au\/products\/a5675627-oex-alternator-12v-130a-denso-style-hig","provider":"Micks Gone Bush","version":"1.0","type":"link"}