{"product_id":"a5689984-oex-starter-motor-12v-10th-cw-denso-styl","title":"OEX Starter Motor 12V 10 Tooth CW Denso Style DXS658","description":"\u003cp\u003eThe OEX starter motor DXS658 is a new 12V unit with 10 teeth and clockwise rotation, built in a Denso style configuration. It is listed as a 2.7kW starter motor with a 2 hole starter mount, 127mm mount centres, and an 88mm flange diameter, so the mounting pattern and physical size should be checked carefully before purchase.\u003c\/p\u003e\n\u003cp\u003eThis starter is specified with a 40mm pinion diameter, 48mm pinion at rest, 11mm mount hole diameter, and an overall length of 295mm. It weighs 8.16kg and is described as suitable for some Hyster\/Cummins applications, but the exact application still needs to be confirmed against the part number and the vehicle or equipment setup.\u003c\/p\u003e\n\u003cp\u003eOEX lists this unit as new, with a one year warranty. The product is classified under rotating electrical and starter motors, and it is intended for buyers who need a 12V clockwise starter with the stated Denso unit make, tooth count, and mounting dimensions rather than a generic replacement.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e12V starter motor\u003c\/li\u003e\n\u003cli\u003e10 tooth pinion\u003c\/li\u003e\n\u003cli\u003eClockwise rotation\u003c\/li\u003e\n\u003cli\u003e2.7kW power rating\u003c\/li\u003e\n\u003cli\u003eDenso style unit\u003c\/li\u003e\n\u003cli\u003e2 hole starter mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePart No.: DXS658\u003c\/li\u003e\n\u003cli\u003eBrand: OEX\u003c\/li\u003e\n\u003cli\u003eType: Starter Motor\u003c\/li\u003e\n\u003cli\u003eVoltage: 12V\u003c\/li\u003e\n\u003cli\u003eNumber of teeth: 10\u003c\/li\u003e\n\u003cli\u003eRotation: CW\u003c\/li\u003e\n\u003cli\u003ePower rating: 2.7kW\u003c\/li\u003e\n\u003cli\u003eSuits unit make: Denso\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication and Buying Notes\u003c\/h3\u003e\n\u003cp\u003eBefore ordering, match the part number DXS658 and compare the mounting details with the unit being replaced. The key checks here are the 12V electrical setup, clockwise rotation, 10 tooth pinion count, 2 hole starter mount, 127mm mount centres, and 88mm flange diameter. If any of those differ, the starter may not physically suit the application.\u003c\/p\u003e\n\u003cp\u003eThe listed 2.7kW power rating and 295mm overall length are useful comparison points when cross-checking against the existing starter. On equipment such as some Hyster\/Cummins applications, the starter can be similar in appearance to other units while still differing in pinion size, pinion rest position, or mount hole dimensions, so measure the old starter rather than relying on appearance alone.\u003c\/p\u003e\n\u003cp\u003eThe product is specified for Denso style applications and is marked as suitable for some Hyster\/Cummins applications, but that is not the same as a universal fitment statement. Confirm the original unit make, tooth count, rotation direction, and mounting pattern before buying, especially where the equipment has had previous repairs or starter changes.\u003c\/p\u003e\n\u003cp\u003eIf you are replacing a failed starter, check the pinion diameter at 40mm and the pinion at rest at 48mm, as these details can affect engagement and clearance. The unit is new and carries a one year warranty, but warranty cover does not replace the need to confirm the right application before installation.\u003c\/p\u003e\n\u003cp\u003eBefore supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.\u003c\/p\u003e\n\u003cp\u003eFor workshop, fleet, and equipment applications, accurate identification of part number DXS658 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.\u003c\/p\u003e\n\u003cp\u003eRelevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty One Year, Mount Centres A 127mm, Number of Teeth 10, Pinion at Rest 48mm, Power Rating 2.7kW, Suits Unit Make Denso, Note Suits some Hyster\/Cummins applications, Starter Mount Type 2 Hole.\u003c\/p\u003e\n\u003cp\u003eAdditional published details for cross-checking include Weight 8.16kg, Product Group 1 ROTATING ELECTRICAL, Part No. DXS658, Brand OEX, Description OEX Starter Motor 12V 10Th CW Denso Style, Flange Diameter 88mm, Mount Hole Diameter 11, Overall Length 295mm, Pinion Diameter 40mm, Rotation CW.\u003c\/p\u003e\n\u003cp\u003eOEX Starter Motor 12V 10Th CW Denso Style. Part number DXS658 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.\u003c\/p\u003e\n\u003cp\u003eFor part number DXS658, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.\u003c\/p\u003e\n\u003cp\u003eFor a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.\u003c\/p\u003e\n\u003cp\u003eWhere no verified application list is available, the part number, mounting details, connector style, and published specifications should be used as the primary selection criteria.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility note:\u003c\/strong\u003e Confirm fitment by matching part number DXS658, 12V voltage, 10 tooth count, clockwise rotation, Denso style specification, and the stated mount and dimensional details before purchase.\u003c\/p\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003ch4\u003eWhat is the part number for this starter motor?\u003c\/h4\u003e\n\u003cp\u003eThe part number is DXS658. For this listing, part number DXS658 is the main reference point. Listed voltage is 12. These details should still be checked against the original unit before ordering.\u003c\/p\u003e\n\u003ch4\u003eWhat voltage is this starter motor?\u003c\/h4\u003e\n\u003cp\u003eIt is a 12V starter motor. For this listing, part number DXS658 is the main reference point. Listed voltage is 12. These details should still be checked against the original unit before ordering.\u003c\/p\u003e\n\u003ch4\u003eHow many teeth does the pinion have?\u003c\/h4\u003e\n\u003cp\u003eThe starter has 10 teeth. For this listing, part number DXS658 is the main reference point. Listed voltage is 12. These details should still be checked against the original unit before ordering.\u003c\/p\u003e\n\u003ch4\u003eWhat rotation direction is listed?\u003c\/h4\u003e\n\u003cp\u003eIt is listed as clockwise rotation, or CW. For this listing, part number DXS658 is the main reference point. Listed voltage is 12. These details should still be checked against the original unit before ordering.\u003c\/p\u003e\n\u003ch4\u003eWhat is the power rating?\u003c\/h4\u003e\n\u003cp\u003eThe stated power rating is 2.7kW. For this listing, part number DXS658 is the main reference point. Listed voltage is 12. These details should still be checked against the original unit before ordering.\u003c\/p\u003e\n\u003ch4\u003eIs fitment confirmed for a specific vehicle model?\u003c\/h4\u003e\n\u003cp\u003eNo specific vehicle model fitment is confirmed. The listing only notes that it suits some Hyster\/Cummins applications, so the part number and all stated dimensions should be matched before purchase. For this listing, part number DXS658 is the main reference point. Listed voltage is 12. These details should still be checked against the original unit before ordering.\u003c\/p\u003e","brand":"OEX","offers":[{"title":"Default Title","offer_id":56888851234976,"sku":"A5689984","price":956.8,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/5058\/0875\/files\/Zty7lWIIx9wc4wL5Cb9P7w_ad8bf6bc-8174-4b34-9fd9-97bdc7ad72ba.jpg?v=1775123928","url":"https:\/\/www.micksgonebush.com.au\/products\/a5689984-oex-starter-motor-12v-10th-cw-denso-styl","provider":"Micks Gone Bush","version":"1.0","type":"link"}