{"product_id":"a9366124-genuine-alternator-12v-100a-mitsubishi-s","title":"Genuine Products Alternator 12V 100A Mitsubishi Style MXA333","description":"\u003cp\u003eThis Genuine Products alternator is a 12V, 100A unit with part number MXA333, supplied new as an each item. It is described as Mitsubishi style and suits Mitsubishi unit make applications. The alternator uses a pad mount, has an internal regulator, and features a 6 groove pulley with a 53mm outside diameter.\u003c\/p\u003e\n\u003cp\u003eFor installation checks, the key measurements listed are 50mm mount leg thickness, 10 \/ 12 pivot hole diameter, 10mm adjusting hole diameter, and 169mm mount centre to centre. The unit weighs 5.68kg. These measurements are important when comparing the alternator to the original unit already fitted to the vehicle.\u003c\/p\u003e\n\u003cp\u003eA note supplied with the part states it has an analogue field report terminal and will not interchange with MXA331. The unit can be supplied in either 100Amp or 120Amp, so confirming the exact required specification before ordering is worthwhile. Warranty is listed as three years.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e12V alternator with 100A power rating\u003c\/li\u003e\n\u003cli\u003eGenuine Products brand\u003c\/li\u003e\n\u003cli\u003ePart number MXA333\u003c\/li\u003e\n\u003cli\u003ePad mount with internal regulator\u003c\/li\u003e\n\u003cli\u003e6 groove pulley, 53mm outside diameter\u003c\/li\u003e\n\u003cli\u003eNew unit, supplied each\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eType: Alternator\u003c\/li\u003e\n\u003cli\u003eVoltage: 12V\u003c\/li\u003e\n\u003cli\u003ePower rating: 100A\u003c\/li\u003e\n\u003cli\u003eBrand: Genuine Products\u003c\/li\u003e\n\u003cli\u003ePart No.: MXA333\u003c\/li\u003e\n\u003cli\u003eSuits unit make: Mitsubishi\u003c\/li\u003e\n\u003cli\u003eRegulator type: Internal\u003c\/li\u003e\n\u003cli\u003eAlternator mount: Pad\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment and application notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuits unit make: Mitsubishi\u003c\/li\u003e\n\u003cli\u003eListed application information includes Holden Adventra, Holden Calais, Holden Caprice, Holden Commodore, Holden Crewman, Holden One Tonner, and Holden Statesman\u003c\/li\u003e\n\u003cli\u003eFitment examples provided include Holden Adventra 2005, 2006, 2007, and 2008\u003c\/li\u003e\n\u003cli\u003eApplication should be confirmed against the original alternator part number and mounting measurements before purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication and Buying Notes\u003c\/h3\u003e\n\u003cp\u003eWhen checking this alternator for a replacement job, compare the original unit against part number MXA333, the pad mount layout, and the listed measurements of 50mm mount leg thickness, 169mm mount centre to centre, and 10 \/ 12 pivot hole diameter. Small differences in mounting or pulley setup can affect whether the alternator physically installs correctly.\u003c\/p\u003e\n\u003cp\u003eThe 12V, 100A rating is a useful checkpoint when matching the charging system output required by the vehicle. The listing also notes that the unit can be supplied in either 100Amp or 120Amp, so it is best to confirm which version is needed before placing an order. The analogue field report terminal is another detail that should be matched to the vehicle wiring arrangement.\u003c\/p\u003e\n\u003cp\u003eThis alternator uses an internal regulator and a 6 groove pulley with a 53mm outside diameter. Those details need to line up with the existing unit and belt setup, especially if the vehicle has been modified or if the previous alternator was replaced with a different specification. The note that it will not interchange with MXA331 is also important for parts matching.\u003c\/p\u003e\n\u003cp\u003eThe part is supplied new, not remanufactured, and carries a three year warranty. That gives useful buying context, but it does not remove the need to confirm fitment. The safest approach is to check the original alternator, compare the part number, and verify all mounting and pulley details before fitting.\u003c\/p\u003e\n\u003cp\u003eBefore supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.\u003c\/p\u003e\n\u003cp\u003eFor workshop, fleet, and equipment applications, accurate identification of part number MXA333 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.\u003c\/p\u003e\n\u003cp\u003eRelevant published details for this unit include Type ALTERNATOR, Unit of Measure EACH, Warranty Three Years, Mount Leg Thickness 50mm, Pivot Hole Diameter 10 \/ 12, Pulley Outside Diameter 53mm, Regulator Type Internal, Voltage 12, Alternator Mount Pad, New \/ Reman. New.\u003c\/p\u003e\n\u003cp\u003eAdditional published details for cross-checking include Product Group 2 ALTERNATORS, Part No. MXA333, Brand GENUINE PRODUCTS, Description Genuine Alternator 12V 100A Mitsubishi Style, Adjusting Hole Diameter 10, Pin Code IR127, Power Rating (Amp) 100, Pulley Section 6 Groove, Suits Unit Make Mitsubishi.\u003c\/p\u003e\n\u003cp\u003eGenuine Alternator 12V 100A Mitsubishi Style. Part number MXA333 should be checked first. Listed voltage is 12. Listed output rating is 100. These details form the core reference points used by parts interpreters when confirming the correct replacement.\u003c\/p\u003e\n\u003cp\u003eMount style is Pad. Regulator type is Internal. Pulley configuration is 6 Groove. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.\u003c\/p\u003e\n\u003cp\u003eFor part number MXA333, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.\u003c\/p\u003e\n\u003cp\u003eFor a alternator in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 and output 100 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.\u003c\/p\u003e\n\u003cp\u003eAvailable application references include HOLDEN ADVENTRA, HOLDEN ADVENTRA 2005, HOLDEN ADVENTRA 2006, HOLDEN ADVENTRA 2007. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility note:\u003c\/strong\u003e Confirm fitment using the original part number, MXA333, along with the mounting measurements, pulley specification, regulator type, and vehicle application details before ordering. Do not rely on visual similarity alone, as the note supplied states it will not interchange with MXA331.\u003c\/p\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003ch4\u003eWhat is the part number for this alternator?\u003c\/h4\u003e\n\u003cp\u003eThe listed part number is MXA333.\u003c\/p\u003e\n\u003ch4\u003eIs this alternator new or remanufactured?\u003c\/h4\u003e\n\u003cp\u003eIt is listed as new.\u003c\/p\u003e\n\u003ch4\u003eWhat voltage and amperage does it have?\u003c\/h4\u003e\n\u003cp\u003eIt is a 12V alternator with a 100A power rating.\u003c\/p\u003e\n\u003ch4\u003eDoes it use an internal regulator?\u003c\/h4\u003e\n\u003cp\u003eYes. The regulator type is listed as internal.\u003c\/p\u003e\n\u003ch4\u003eWhat mounting and pulley details are listed?\u003c\/h4\u003e\n\u003cp\u003eIt has a pad mount, 50mm mount leg thickness, 10 \/ 12 pivot hole diameter, 10mm adjusting hole diameter, 169mm mount centre to centre, and a 6 groove pulley with 53mm outside diameter.\u003c\/p\u003e\n\u003ch4\u003eWhat should I check before buying?\u003c\/h4\u003e\n\u003cp\u003eConfirm the original part number, the Mitsubishi application, the analogue field report terminal, and the listed mounting and pulley measurements. The note also states it will not interchange with MXA331.\u003c\/p\u003e","brand":"GENUINE PRODUCTS","offers":[{"title":"Default Title","offer_id":56888681529504,"sku":"A9366124","price":743.6,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/5058\/0875\/files\/d2aW0YmXeQrh9cUFd2JArQ_9f5a30fa-13d7-42ca-8876-8ae38a8ae489.jpg?v=1775121063","url":"https:\/\/www.micksgonebush.com.au\/products\/a9366124-genuine-alternator-12v-100a-mitsubishi-s","provider":"Micks Gone Bush","version":"1.0","type":"link"}