{"product_id":"a9560818-oex-alternator-12v-130a-hitachi-style","title":"OEX Alternator 12V 130A Hitachi Style HXA097","description":"\u003cp\u003eThe OEX Alternator HXA097 is a new 12V, 130A unit designed in a Hitachi style configuration. It suits Hitachi applications and uses an internal regulator, a 7 groove pulley, and a twin leg alternator mount. For a replacement alternator, those details matter as much as the amp rating, because pulley, mounting and regulator style all need to match the vehicle setup.\u003c\/p\u003e\n\u003cp\u003eKey measurements on this unit include an 80mm inside mounting leg spacing, a 156mm mount centre-to-centre dimension, a 60mm pulley outside diameter, an M10x1.25 \/ 10.5 pivot hole diameter, and an M8x1.25 adjusting hole diameter. The unit weighs 6.66kg and is supplied as each.\u003c\/p\u003e\n\u003cp\u003eOEX states its products are sourced from market leading original equipment manufacturers and aftermarket suppliers, with ISO9001 certified factory sourcing and a comprehensive nationwide warranty. For buyers comparing alternators, that gives a clear starting point, but the safest match is still to check the part number HXA097, the Hitachi style layout, and the listed dimensions against the vehicle or removed unit.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e12V alternator\u003c\/li\u003e\n\u003cli\u003e130A power rating\u003c\/li\u003e\n\u003cli\u003eHitachi style\u003c\/li\u003e\n\u003cli\u003eInternal regulator\u003c\/li\u003e\n\u003cli\u003eTwin leg alternator mount\u003c\/li\u003e\n\u003cli\u003e7 groove pulley\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: OEX\u003c\/li\u003e\n\u003cli\u003ePart No.: HXA097\u003c\/li\u003e\n\u003cli\u003eVoltage: 12\u003c\/li\u003e\n\u003cli\u003ePower Rating: 130A\u003c\/li\u003e\n\u003cli\u003eSuits Unit Make: Hitachi\u003c\/li\u003e\n\u003cli\u003eAlternator Mount: Twin Leg\u003c\/li\u003e\n\u003cli\u003ePulley Section: 7 Groove\u003c\/li\u003e\n\u003cli\u003ePulley Outside Diameter: 60mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment guidance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eListed fitment includes Infiniti QX80.\u003c\/li\u003e\n\u003cli\u003eListed fitment includes Nissan Navara.\u003c\/li\u003e\n\u003cli\u003eListed fitment includes Nissan Pathfinder.\u003c\/li\u003e\n\u003cli\u003eListed fitment includes Nissan Patrol.\u003c\/li\u003e\n\u003cli\u003eFitment references in the supplied data also show model year coverage for Infiniti QX80 from 2013 to 2019 and Nissan Navara \/ Nissan Pathfinder across multiple years.\u003c\/li\u003e\n\u003cli\u003eNo specific engine, chassis, or exact application code is supplied here, so confirm the part number and physical measurements before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication and Buying Notes\u003c\/h3\u003e\n\u003cp\u003eThis alternator is specified as a 12V, 130A OEX unit with a Hitachi style layout, so the most important checks are voltage, amp output, mounting style, pulley groove count and regulator type. The twin leg mount and 7 groove pulley are not small details; they need to align with the vehicle’s belt system and bracket arrangement for the alternator to sit and run correctly.\u003c\/p\u003e\n\u003cp\u003eThe physical dimensions are also worth checking against the original unit. The 80mm inside mounting legs, 156mm centre-to-centre mount measurement, M10x1.25 \/ 10.5 pivot hole, and M8x1.25 adjusting hole give you useful reference points when comparing against the removed alternator or vehicle bracketry. If the old alternator has been changed previously, measuring it before purchase is a sensible step.\u003c\/p\u003e\n\u003cp\u003eAlthough the fitment list includes Infiniti QX80, Nissan Navara, Nissan Pathfinder and Nissan Patrol references, the exact vehicle match still depends on the alternator fitted to the vehicle. Alternators can vary within the same model range, so the safest approach is to confirm the part number HXA097, the Hitachi make reference, and the mount and pulley details before fitting.\u003c\/p\u003e\n\u003cp\u003eThe unit is new, not remanufactured, and weighs 6.66kg. That weight and construction detail can help when comparing against a removed unit, especially if you are sorting through multiple alternator options. The warranty is 3 years for passenger use and 1 year for commercial use, so it is still important to follow correct installation practice and make sure the charging system is in good order before and after fitting.\u003c\/p\u003e\n\u003cp\u003eFor commercial or high-use vehicles, the 130A output may be relevant where electrical load is higher, but it should still be matched to the vehicle’s intended application. If the belt setup, plug arrangement or mounting offsets are different, do not rely on the amp rating alone. Use the listed dimensions and the part number HXA097 as the primary confirmation points.\u003c\/p\u003e\n\u003cp\u003eBefore supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.\u003c\/p\u003e\n\u003cp\u003eFor workshop, fleet, and equipment applications, accurate identification of part number HXA097 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.\u003c\/p\u003e\n\u003cp\u003eRelevant published details for this unit include Type ALTERNATOR, Unit of Measure EACH, Warranty 3yr Passenger 1yr Commercial, Inside Mounting Legs 80mm, Pivot Hole Diameter M10x1.25 \/ 10.5, Pulley Outside Diameter 60mm, Regulator Type Internal, Voltage 12, Mount Cnt to Cnt 156mm, Weight 6.66kg.\u003c\/p\u003e\n\u003cp\u003eAdditional published details for cross-checking include Product Group 1 ROTATING ELECTRICAL, Part No. HXA097, Brand OEX, Description OEX Alternator 12V 130A Hitachi Style, Adjusting Hole Diameter M8x1.25, Pin Code IR50, Power Rating (Amp) 130, Pulley Section 7 Groove, Suits Unit Make Hitachi, Alternator Mount Twin Leg.\u003c\/p\u003e\n\u003cp\u003eOEX Alternator 12V 130A Hitachi Style. Part number HXA097 should be checked first. Listed voltage is 12. Listed output rating is 130. These details form the core reference points used by parts interpreters when confirming the correct replacement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility note:\u003c\/strong\u003e Please confirm compatibility using part number HXA097, the Hitachi style specification, and the listed mounting and pulley measurements before ordering. Fitment references are supplied for selected Infiniti and Nissan applications, but exact vehicle matching should always be verified against the existing alternator and vehicle details.\u003c\/p\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003ch4\u003eWhat type of alternator is this?\u003c\/h4\u003e\n\u003cp\u003eIt is an OEX alternator, 12V and 130A, in a Hitachi style configuration with an internal regulator and twin leg mount.\u003c\/p\u003e\n\u003ch4\u003eIs this a new unit or a remanufactured unit?\u003c\/h4\u003e\n\u003cp\u003eThis alternator is listed as new.\u003c\/p\u003e\n\u003ch4\u003eWhat part number should I check against?\u003c\/h4\u003e\n\u003cp\u003eThe part number supplied is HXA097.\u003c\/p\u003e\n\u003ch4\u003eWhat pulley setup does it use?\u003c\/h4\u003e\n\u003cp\u003eIt uses a 7 groove pulley with a 60mm pulley outside diameter.\u003c\/p\u003e\n\u003ch4\u003eWhat vehicles are referenced in the fitment data?\u003c\/h4\u003e\n\u003cp\u003eThe supplied fitment references include Infiniti QX80, Nissan Navara, Nissan Pathfinder and Nissan Patrol.\u003c\/p\u003e\n\u003ch4\u003eWhat should I verify before buying?\u003c\/h4\u003e\n\u003cp\u003eCheck part number HXA097, the Hitachi style fitment, 12V system voltage, 130A output, twin leg mounting, and the listed measurements including 80mm inside mounting legs and 156mm mount centre-to-centre.\u003c\/p\u003e","brand":"OEX","offers":[{"title":"Default Title","offer_id":56888772886688,"sku":"A9560818","price":1085.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/5058\/0875\/files\/5-c2T7SBJaBGLvPZEfGu7A_973add33-84a7-44fd-a7fb-c64802fe75f0.jpg?v=1775123006","url":"https:\/\/www.micksgonebush.com.au\/products\/a9560818-oex-alternator-12v-130a-hitachi-style","provider":"Micks Gone Bush","version":"1.0","type":"link"}