{"product_id":"a9560835-oex-alternator-24v-40a-nikko-style","title":"OEX Alternator 24V 40A Nikko Style NXA9701","description":"\u003cp\u003eThe OEX Alternator 24V 40A Nikko Style is a new rotating electrical unit with part number NXA9701. It is rated at 24 volts and 40 amps, uses an internal regulator, and is set up for clockwise rotation. If you are replacing a Nikko-style alternator, the key checks are the part number, mounting arrangement, pulley type, and electrical connections.\u003c\/p\u003e\n\u003cp\u003eThis unit is supplied as each and suits Nikko applications where the mounting and drive details line up. The alternator uses a twin leg mount with 72mm inside mounting legs, a 14mm pivot hole diameter, a 12.5mm adjusting hole diameter, and a 189mm mount centre-to-centre measurement. Those measurements are the practical checks that matter before ordering.\u003c\/p\u003e\n\u003cp\u003eThe pulley is 82mm outside diameter with a BB pulley section, and the alternator weight is 6.34kg. Wiring notes supplied with the unit are ignition wire and red lamp wire, with blue lamp wire noted as well. For commercial or off-road equipment, confirming these details against the removed unit is the safest way to avoid an avoidable mismatch.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOEX new alternator\u003c\/li\u003e\n\u003cli\u003e24V, 40A output rating\u003c\/li\u003e\n\u003cli\u003eInternal regulator\u003c\/li\u003e\n\u003cli\u003eClockwise rotation\u003c\/li\u003e\n\u003cli\u003eTwin leg alternator mount\u003c\/li\u003e\n\u003cli\u003eSuits Nikko unit make\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: OEX\u003c\/li\u003e\n\u003cli\u003eProduct type: Alternator\u003c\/li\u003e\n\u003cli\u003eNew \/ remanufactured: New\u003c\/li\u003e\n\u003cli\u003eVoltage: 24\u003c\/li\u003e\n\u003cli\u003ePower rating: 40 amp\u003c\/li\u003e\n\u003cli\u003eRegulator type: Internal\u003c\/li\u003e\n\u003cli\u003eRotation: CW\u003c\/li\u003e\n\u003cli\u003eAlternator mount: Twin Leg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVerified fitment references\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuits Nikko unit make\u003c\/li\u003e\n\u003cli\u003eFitment references include DOOSAN\/DAEWOO various\u003c\/li\u003e\n\u003cli\u003eFitment references include HITACHI EX200-1\/2, EX200-3, EX200LC, EX200LC-2, EX300-2, LX80, ZX210-5, ZX210K, ZX210W, ZX270, ZX280\/L\u003c\/li\u003e\n\u003cli\u003eFitment references include ISEKI 9000\u003c\/li\u003e\n\u003cli\u003eFitment references include ISUZU 10PC1, 6BD1, 6RB1, C\/E SERIES, ELF, F, F\/J SERIES, FORWARD F, GIGA, L SERIES\u003c\/li\u003e\n\u003cli\u003eAdditional listed applications include KATO HD1023R, KAWASAKI 65Z, KOMATSU AH05, FD10, FD20, FD20P, FD23P, FD30, FD33, FD35, FD40, FD50, FD100, FD150, SAKAI TS150, and TCM FD35, FD38, FD40, FD45, FD50, FD50Z, FD50Z7, FD60, FD60Z, FD100Z, FD100Z8\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication and Buying Notes\u003c\/h3\u003e\n\u003cp\u003eBefore ordering, compare the alternator you are replacing with the key identifiers on this unit: part number NXA9701, 24V voltage, 40A output, internal regulator, clockwise rotation, and twin leg mounting. The 72mm inside mounting legs, 14mm pivot hole, 12.5mm adjusting hole, and 189mm mount centre-to-centre are the measurements most likely to determine whether the unit will physically suit your application.\u003c\/p\u003e\n\u003cp\u003eThe pulley details also matter. This alternator has an 82mm outside diameter pulley with a BB section, so it should be checked against the belt and pulley arrangement on the original unit. If the pulley profile, offset, or belt match is different on the equipment, the alternator should not be assumed to fit just because the voltage and amperage look close.\u003c\/p\u003e\n\u003cp\u003eThe wiring notes supplied are ignition wire, red lamp wire, and blue lamp wire. That makes it important to confirm the connector and warning lamp wiring on the machine before installation. Small differences in alternator wiring can affect operation even where the casing and mounts appear similar.\u003c\/p\u003e\n\u003cp\u003eThis alternator is listed against a wide range of equipment families, including Nikko applications, some Hitachi excavator models, Isuzu industrial and truck references, and several Komatsu, Kato, Sakai, TCM, and Kawasaki applications. Because those groups contain multiple variants, the safest purchasing method is still to match the removed unit by part number and measurements rather than relying on model name alone.\u003c\/p\u003e\n\u003cp\u003eThe listed warranty is 3 years for passenger use and 1 year for commercial use. That warranty detail is useful, but it does not replace the need to confirm the application, mount type, pulley section, and rotation before fitting. If the alternator is being sourced for commercial machinery, checking the exact vehicle or equipment reference is especially important.\u003c\/p\u003e\n\u003cp\u003eBefore supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.\u003c\/p\u003e\n\u003cp\u003eFor workshop, fleet, and equipment applications, accurate identification of part number NXA9701 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.\u003c\/p\u003e\n\u003cp\u003eRelevant published details for this unit include Type ALTERNATOR, Unit of Measure EACH, Warranty 3yr Passenger 1yr Commercial, Inside Mounting Legs 72mm, Pivot Hole Diameter 14, Pulley Outside Diameter 82mm, Regulator Type Internal, Suits Unit Make Nikko, Note Ignition wire - Red Lamp wire - Blue, Mount Cnt to Cnt 189mm.\u003c\/p\u003e\n\u003cp\u003eAdditional published details for cross-checking include Weight 6.34kg, Product Group 1 ROTATING ELECTRICAL, Part No. NXA9701, Brand OEX, Description OEX Alternator 24V 40A Nikko Style, Adjusting Hole Diameter 12.5, Pin Code IR94, Power Rating (Amp) 40, Pulley Section BB, Rotation CW.\u003c\/p\u003e\n\u003cp\u003eOEX Alternator 24V 40A Nikko Style. Part number NXA9701 should be checked first. Listed voltage is 24. Listed output rating is 40. These details form the core reference points used by parts interpreters when confirming the correct replacement.\u003c\/p\u003e\n\u003cp\u003eMount style is Twin Leg. Regulator type is Internal. Pulley configuration is BB. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.\u003c\/p\u003e\n\u003cp\u003eFor part number NXA9701, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility note:\u003c\/strong\u003e Confirm fitment by matching part number NXA9701, 24V 40A rating, Nikko-style application, twin leg mount measurements, pulley specification, rotation, and wiring details against the existing alternator and equipment application before purchase.\u003c\/p\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003ch4\u003eWhat is the part number for this alternator?\u003c\/h4\u003e\n\u003cp\u003eThe part number is NXA9701.\u003c\/p\u003e\n\u003ch4\u003eWhat are the main electrical specifications?\u003c\/h4\u003e\n\u003cp\u003eIt is a 24V alternator with a 40A power rating and an internal regulator.\u003c\/p\u003e\n\u003ch4\u003eIs this alternator new or remanufactured?\u003c\/h4\u003e\n\u003cp\u003eIt is listed as new.\u003c\/p\u003e\n\u003ch4\u003eWhat mounting and sizing details should I check?\u003c\/h4\u003e\n\u003cp\u003eCheck the twin leg mount, 72mm inside mounting legs, 14mm pivot hole diameter, 12.5mm adjusting hole diameter, and 189mm mount centre-to-centre.\u003c\/p\u003e\n\u003ch4\u003eWhat pulley details are listed?\u003c\/h4\u003e\n\u003cp\u003eThe pulley outside diameter is 82mm and the pulley section is BB.\u003c\/p\u003e\n\u003ch4\u003eWhat warranty is supplied?\u003c\/h4\u003e\n\u003cp\u003eThe listed warranty is 3 years for passenger use and 1 year for commercial use.\u003c\/p\u003e","brand":"OEX","offers":[{"title":"Default Title","offer_id":56888772591776,"sku":"A9560835","price":770.9,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/5058\/0875\/files\/rLqVU0aRIvPgOmvsfgzrcA_0864231a-efc8-44af-b758-c592f178094e.jpg?v=1775123000","url":"https:\/\/www.micksgonebush.com.au\/products\/a9560835-oex-alternator-24v-40a-nikko-style","provider":"Micks Gone Bush","version":"1.0","type":"link"}