{"product_id":"a9683490-oex-alternator-12v-110a-denso-style","title":"OEX Alternator 12V 110A Denso Style DXA4043","description":"\u003cp\u003eThe OEX Alternator DXA4043 is a 12V, 110A rotating electrical unit built as a Denso style alternator and supplied new, not remanufactured. It uses an internal regulator, a 7 groove pulley, and a quad leg alternator mount, so the physical mounting and drive configuration need to line up with the vehicle before purchase.\u003c\/p\u003e\n\u003cp\u003eThis alternator is listed with a 60mm pulley outside diameter, 54mm inside mounting legs, a 182mm mount centre-to-centre measurement, and M10x1.25 \/ 11 pivot hole diameter. Those dimensions are the practical checks that matter when you are matching a replacement alternator to the existing unit or comparing against installation space.\u003c\/p\u003e\n\u003cp\u003eOEX positions this product in its rotating electrical range and lists a 3 year passenger \/ 1 year commercial warranty. The unit is identified by part number DXA4043 and pin code IR186, with a stated weight of 6.16kg. For buyers and workshops alike, the part number, unit style, and mounting measurements should be confirmed alongside the vehicle application before ordering.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e12V alternator with 110A power rating\u003c\/li\u003e\n\u003cli\u003eDenso style unit\u003c\/li\u003e\n\u003cli\u003eInternal regulator\u003c\/li\u003e\n\u003cli\u003e7 groove pulley\u003c\/li\u003e\n\u003cli\u003eQuad leg alternator mount\u003c\/li\u003e\n\u003cli\u003eNew unit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVoltage: 12V\u003c\/li\u003e\n\u003cli\u003eAmperage: 110A\u003c\/li\u003e\n\u003cli\u003ePart No.: DXA4043\u003c\/li\u003e\n\u003cli\u003eBrand: OEX\u003c\/li\u003e\n\u003cli\u003eUnit of Measure: Each\u003c\/li\u003e\n\u003cli\u003eWarranty: 3yr Passenger \/ 1yr Commercial\u003c\/li\u003e\n\u003cli\u003eSuits unit make: Denso\u003c\/li\u003e\n\u003cli\u003eAlternator mount: Quad Leg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVerified fitment guidance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHyundai iLoad \/ H-1\u003c\/li\u003e\n\u003cli\u003eHyundai iMax \/ H-1\u003c\/li\u003e\n\u003cli\u003eFitment data is shown against Hyundai applications in the supplied vehicle information\u003c\/li\u003e\n\u003cli\u003eModel years appear in the application data for some listings, including 2008, 2012 and 2013 to 2018\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication and Buying Notes\u003c\/h3\u003e\n\u003cp\u003eBefore ordering, match the part number DXA4043 and confirm the alternator is a Denso style unit with a quad leg mount. The listed physical checks — 12V, 110A, 60mm pulley outside diameter, 7 groove pulley, 54mm inside mounting legs, and 182mm mount centre-to-centre — are the key points that determine whether the unit will fit and line up correctly.\u003c\/p\u003e\n\u003cp\u003eThe vehicle application data points to Hyundai iLoad \/ H-1 and Hyundai iMax \/ H-1. Even where the model name looks familiar, alternator fitment can still vary with mounting arrangement, pulley configuration, and regulator type, so the existing unit should be compared carefully against the measurements above before a purchase is made.\u003c\/p\u003e\n\u003cp\u003eThis alternator is new and carries an internal regulator, which matters when replacing a unit that may have a different external or internal control arrangement. The weight is listed at 6.16kg, and the mounting holes are specified as M10x1.25 \/ 11 pivot and 10mm adjusting hole diameter, so those dimensions should be checked if the old alternator has worn or non-standard fittings.\u003c\/p\u003e\n\u003cp\u003eFor workshop use, the warranty is listed as 3 years for passenger use and 1 year for commercial use. That warranty detail does not remove the need to verify fitment, but it does give a clear usage-based reference when the vehicle is being used privately or in commercial service. Keep the pin code IR186 and part number DXA4043 on hand when comparing catalogues or speaking with a parts interpreter.\u003c\/p\u003e\n\u003cp\u003eBefore supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.\u003c\/p\u003e\n\u003cp\u003eFor workshop, fleet, and equipment applications, accurate identification of part number DXA4043 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.\u003c\/p\u003e\n\u003cp\u003eRelevant published details for this unit include Type ALTERNATOR, Unit of Measure EACH, Warranty 3yr Passenger 1yr Commercial, Inside Mounting Legs 54mm, Pivot Hole Diameter M10x1.25 \/ 11, Pulley Outside Diameter 60mm, Regulator Type Internal, Voltage 12, Mount Cnt to Cnt 182mm, Weight 6.16kg.\u003c\/p\u003e\n\u003cp\u003eAdditional published details for cross-checking include Product Group 1 ROTATING ELECTRICAL, Part No. DXA4043, Brand OEX, Description OEX Alternator 12V 110A Denso Style, Adjusting Hole Diameter 10, Pin Code IR186, Power Rating (Amp) 110, Pulley Section 7 Groove, Suits Unit Make Denso, Alternator Mount Quad Leg.\u003c\/p\u003e\n\u003cp\u003eOEX Alternator 12V 110A Denso Style. Part number DXA4043 should be checked first. Listed voltage is 12. Listed output rating is 110. These details form the core reference points used by parts interpreters when confirming the correct replacement.\u003c\/p\u003e\n\u003cp\u003eMount style is Quad Leg. Regulator type is Internal. Pulley configuration is 7 Groove. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.\u003c\/p\u003e\n\u003cp\u003eFor part number DXA4043, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.\u003c\/p\u003e\n\u003cp\u003eFor a alternator in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 and output 110 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.\u003c\/p\u003e\n\u003cp\u003eAvailable application references include HYUNDAI ILOAD \/ H-1, HYUNDAI ILOAD \/ H-1 2008, HYUNDAI ILOAD \/ H-1 2012, HYUNDAI IMAX \/ H-1. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility note:\u003c\/strong\u003e Confirm compatibility using part number DXA4043, the Denso style specification, the quad leg mount, and the measured details listed here. Vehicle application should be checked against the actual alternator removed from the vehicle before fitting.\u003c\/p\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003ch4\u003eWhat is the part number for this alternator?\u003c\/h4\u003e\n\u003cp\u003eThe part number is DXA4043.\u003c\/p\u003e\n\u003ch4\u003eIs this alternator new or remanufactured?\u003c\/h4\u003e\n\u003cp\u003eIt is listed as new.\u003c\/p\u003e\n\u003ch4\u003eWhat voltage and amperage does it have?\u003c\/h4\u003e\n\u003cp\u003eIt is a 12V alternator with a 110A power rating.\u003c\/p\u003e\n\u003ch4\u003eWhat type of regulator does it use?\u003c\/h4\u003e\n\u003cp\u003eIt has an internal regulator.\u003c\/p\u003e\n\u003ch4\u003eWhich vehicles are shown in the fitment data?\u003c\/h4\u003e\n\u003cp\u003eThe supplied fitment information shows Hyundai iLoad \/ H-1 and Hyundai iMax \/ H-1 applications.\u003c\/p\u003e\n\u003ch4\u003eWhat should be checked before buying?\u003c\/h4\u003e\n\u003cp\u003eConfirm the part number DXA4043, the Denso style unit make, the quad leg mount, pulley section, and the mounting measurements including 54mm inside mounting legs and 182mm mount centre-to-centre.\u003c\/p\u003e","brand":"OEX","offers":[{"title":"Default Title","offer_id":56888767185056,"sku":"A9683490","price":1792.7,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/5058\/0875\/files\/LVtXaHfZdKlm3_sDqPNUVA_890271da-1be5-44a9-b8f4-0c47d980afe0.jpg?v=1775122848","url":"https:\/\/www.micksgonebush.com.au\/products\/a9683490-oex-alternator-12v-110a-denso-style","provider":"Micks Gone Bush","version":"1.0","type":"link"}