Victron Blue IP22 Smart Charger 12/30, 3 Outputs
Victron Blue IP22 Smart Charger 12/30 (3 outlet model), 5 Years Warranty. The Blue Smart IP22 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats, and camper-vans.
The Blue Smart IP22 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available.
With up to 94% efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard.
Adaptive 6-stage charge algorithm: test - bulk – absorption - recondition – float – storage:
The Blue Smart Charger features a microprocessor-controlled ‘adaptive’ battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used.
Storage Mode: less maintenance and aging when the battery is not in use:
The storage mode kicks in whenever the battery has not been subjected to discharge for 24 hours. In the storage mode, float voltage is reduced to 2,2V/cell (13,2V for a 12V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize the battery. This feature prevents stratification of the electrolyte and sulfation, a major cause of early battery failure.
Also charges Li-ion (LiFePO₄) batteries:
LiFePO₄ batteries are charged with a simple bulk – absorption – float algorithm.
NIGHT and LOW setting:
When in NIGHT or LOW mode, the output current is reduced to max. 50% of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended manually.
Protected against overheating:
Output current will reduce as temperature increases up to 50°C, but the Blue Smart Charger will not fail.
Eleven LEDs for status indication:
- Charge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY.
- MODE button to set: NORMAL (14,4V) / HIGH (14,7V) / RECONDITION / LI-ION.
Victron Blue IP22 Smart Charger 12/30, 3 Outputs, 5 Year Warranty
|Output Current Rating (Amps)||30.0 Amps|
|Operating Temperature Range||-20 to +50°C|
|Output System Voltage||12V|
|Charge current||30 A|
|Dimensions||108 x 65 x 235 mm (L x W x H)|
|Net Weight (kg)||1.3 Kg|
|Charge Algorithm||6-stage adaptive|
|Charge voltage 'absorption'||Normal: 14,4V | High: 14,7V | Li-ion: 14,2V|
|Charge Voltage Float - Wet (25 degrees)**||Normal: 13,8V | High: 13,8V | Li-ion: 13,5V|
|Charge voltage 'storage'||Normal: 13,2V | High: 13,2V | Li-ion: 13,5V|
|Protection||Battery reverse polarity (fuse), Output short circuit, and Over temperature|
|Charge current in low current mode||15 A|
|No-load power consumption||0.5 W|
|Battery-connection||Screw terminals 13 mm² / AWG6|
|Input Voltage||180 – 265 VAC|
|Can be used as a power supply||Yes|
|Manufacturers Warranty||5 Years|