Power Up With Micks Gone Bush

Power Solutions

Lithium Batteries & Automotive Electronics

Phone 1300359916

SHOP NOW
BMPRO MINIBOOSTPRO 30A lithium DC–DC charger with solar input - Micks Gone Bush
BMPRO MINIBOOSTPRO 30A lithium DC–DC charger with solar input $395.00
KEY FEATURES 30A multi-stage lithium DC-DC charger Dual input solar/aux up to 30A Multi battery chemistry selector Suitable for modern smart alternators BMPRO BP35 and J35 compatible BMPRO signature durability and ease of use 2 year warranty RAPIDLY CHARGE YOUR DEEP CYCLE BATTERY WHILE YOU DRIVE BMPRO’s MiniBoostPRO is a compact Lithium DC-DC charger with solar input, specially designed for the RV market. The MiniBoostPRO battery charger offers effective charging of your caravan, 4WD or camper trailer’s house battery from the towing vehicle’s electrical system. Blending both solar and auxiliary inputs, the MiniBoostPRO provides a combined charging current of up to a maximum of 30A, with a preference to solar. It features proprietary technology designed to charge from modern car alternators. Moreover, it can be used with LiFePO4 batteries as well as with traditional lead-acid batteries. The MiniBoostPRO provides a multi-stage charging profile. It functions when wired directly to 12V batteries and enhances BMPRO’s BatteryPlus35 and J35 battery management systems. A range of protective features built into the MiniBoostPRO will guard your caravan or camper trailer’s charging capacity. PRODUCT SPECIFICATIONS Auxiliary Input Voltage 9-15V DCSolar Input Voltage 9-25V DCOutput Voltage Gel: 14.2V, AGM/Wet: 14.4.V,  LiFePO4: 14.6VFloat Voltage 13.6VOutput Current Auxiliary Bypass: max. 30A; Auxiliary Boost: max. 22A; Solar Charging: max. 30A; Blending Charging: max. 30AQuiescent Current Draw Auxiliary/Primary Battery: < 25mA; Secondary Battery: < 18mAOperating Temperature -20°C to 80°CDimensions 160mm x 131mm x 41mmIP Rating IP20Standards RCM Approval, EMC CISPR 11: 2015 Class BBattery Chemistry Gel, AGM/Wet, LiFePO4  
BMPRO MINIBOOST DC–DC Battery Charger - Micks Gone Bush
BMPRO MINIBOOST DC–DC Battery Charger $295.00
KEY FEATURES DC-DC charger specifically for RV applications Input over-current and reverse voltage protection Output over-current & short circuit protection Output reverse connection protection BMPRO signature durability and ease of use   IN-VEHICLE DC-DC CHARGER FOR YOUR RV MiniBoost is a compact DC-DC charger /booster for RVs. It is specially designed to work with BMPRO’s BatteryPlus35 and J35 systems.  Charge your caravan or camper trailer's house battery from the towing vehicle’s electrical system, even if the voltage delivered from the tow vehicle is lower than required for a recharge. The MiniBoost DC to DC charger provides a 2-stage charging profile. It delivers an efficient and controlled current until the auxiliary battery is charged. Mini boost functions when wired directly to most 12V Lead Acid batteries. The MiniBoost is not a power supply and must be connected to a battery. To get more out of your solar panels while driving, or to use the DC-DC charger with a lithium battery, refer to   PRODUCT SPECIFICATIONS Output 14.4V (constant voltage)// 8-18A (constant current), depending on input voltageInput 10-16 VBattery Type 12V Lead AcidBattery Chemistry AGM, Gel, Calcium or WetOperating Temp 0-50 C AmbientUnit size 157x131x39 mm  
BMPRO BATTERYCHARGE25 25 Amp | 12V Battery Charger - Micks Gone Bush
BMPRO BATTERYCHARGE25 25 Amp | 12V Battery Charger $425.00
KEY FEATURES Made in Australia 7 STAGE – Micro Digital Processor Suitable for charging Lead Acid, AGM, Gel, Calcium Includes LITHIUM (LiFeP04) charging profile Adjustable AMP output Suits batteries 80-800Ah Rugged casing Power Supply Mode FAST 25 AMP BATTERY CHARGER WITH POWER SUPPLY MODE 25 Amp 12V battery charger, BatteryCharge25 is an automatic battery charger with seven charge states. Depending on the size of the battery, the output current is adjustable to 5, 15 or 25 Amps. It delivers high-performance, intelligent charging. Use it with all types of 12 Volt Lead Acid batteries, such as AGM, Gel, Calcium, or Wet, as well as with LiFePO4 Lithium batteries. You can also use the charger to recondition sulfated lead-acid batteries or revive drained LiFePO4 batteries. Moreover, it is ok to leave the battery permanently connected to the charger without damage or adverse effect on its performance. Use BatteryCharge25 to service your car, caravan, bike, truck, boat, jet ski, as well as farm equipment or communications. The portable battery charger has protective circuits to prevent it from sparking and overheating. It also features an informative LED interface, which indicates the stage of the charge cycle, selected battery chemistry, and battery charge rate. 25 Amp battery charger will increase your battery’s life and performance. It is multistage with seven stages, which are: desulphation, soft charge, bulk charge, absorption, analysis, recondition, and float. Use the charger in power supply mode with a constant voltage of 13.6VDC or up to 20A. This is to power appliances or tools that are otherwise 12V battery-powered.   PRODUCT SPECIFICATIONS Output 5/15/25 AmpsInput 240V, 50HzBattery Size 80 – 800 AhBattery Type Lead Acid, LiFePO4Battery Chemistry AGM, Gel, Calcium or Wet, LiFePO4Charger Type Multi-stagePower Supply Mode 13.6V (20 Amp max)
BMPRO BATTERYCHARGE15 15 Amp | 12V Battery Charger - Micks Gone Bush
BMPRO BATTERYCHARGE15 15 Amp | 12V Battery Charger $295.00
KEY FEATURES Designed and made in Australia 7 STAGE – Micro Digital Processor Suitable for charging Lead Acid, AGM, Gel, Calcium Includes LITHIUM (LiFePO4) charging profile Adjustable Amp output Suits batteries 50-500Ah Rugged casing Power Supply Mode   PROTECT YOUR 12V BATTERY FROM OVERCHARGING 15 Amp battery charger BatteryCharge15 is an automatic multistage charger delivering high-performance intelligent charging. Depending on the size of the battery, you can adjust the output current to 5, 10 or 15 Amps. Use it with all types of 12 Volt Lead Acid batteries, such as AGM, Gel, Calcium, or Wet, as well as with LiFePO4 Lithium batteries. You can also use the charger to recondition sulfated lead-acid batteries or revive drained LiFePO4 batteries. Moreover, it is ok to leave the battery permanently connected to the charger without damage or adverse effect on its performance. Use BatteryCharge15 to service your car, caravan, bike, truck, boat, jet ski, tractor, or as a spare charger. The smart battery charger has protective circuits to prevent it from sparking and overheating. It also features an informative LED interface, which indicates the stage of the charge cycle, selected battery chemistry, and battery charge rate. A heavy-duty steel body protects all components inside, making the unit extremely durable. 15 Amp battery charger will increase your battery’s life and performance. It is multistage with seven stages, which are: desulphation, soft charge, bulk charge, absorption, analysis, recondition, and float. Use the charger in power supply mode with a constant voltage of 13.6VDC or up to 10A to power appliances or tools that are otherwise 12V battery powered. PRODUCT SPECIFICATIONS Output 5/10/15 AmpsInput 240V, 50HzBattery Size 50-500 AhBattery Type Lead Acid, LiFePO4Battery Chemistry AGM, Gel, Calcium or Wet, LiFePO4Charger Type Multi-stagePower Supply Mode 13.6 V (10 Amp max)          
BMPRO BATTERYCHARGE7.5 7.5 Amp | 12V and 24V Battery Charger - Micks Gone Bush
BMPRO BATTERYCHARGE7.5 7.5 Amp | 12V and 24V Battery Charger $189.00
KEY FEATURES Multi-stage charger Ability to charge multiple battery chemistries LCD display shows charge progress Overload and reverse connection protection Capable of charging battery sizes 10-240Ah Durable, dust- and water-proof casing Large clamps for easy battery connection Ring terminals to mount the charger on the battery RECHARGE YOUR BATTERY TO ORIGINAL CAPACITY 7 Amp battery charger BatteryCharge7.5 has ten charge states, including pulse and trickle charge modes. It delivers high-performance intelligent charging with automatically variable charging amperage up to 7.5 Amps. Use it with all types of 12 and 24 Volt Lead Acid batteries, such as AGM, Gel, Calcium, or Wet, as well as with LiFePO4 Lithium batteries: 12 V: with a capacity of 18 – 240 Ah 24 V: with a capacity of 10 – 120 Ah Lithium (12.8V LiFePO4): with a capacity of 10 – 80 Ah The ten-phase-charging strategy enables the recharging of the battery to almost 100 % of its original capacity. The ten phases are: check, recovery, soft start, bulk (stages 4 to 7), absorption, maintenance 1 and maintenance 2. You can leave the battery permanently connected to the charger without damage or adverse effect on its performance. Use BatteryCharge7.5 to service your car, caravan, bike, truck, boat or as a spare charger. The smart battery charger has protective circuits to prevent it from sparking and overheating. It also features a large LCD display with indicators to let you know the charge progress of your battery. In cold weather, use a cold start to protect your battery from damage. This 7 Amp battery charger comes supplied both with large clamps and ring terminals to connect to your battery. You can even use it to regenerate completely discharged batteries. PRODUCT SPECIFICATIONS Output variable up to 7.5 AmpsInput 240V, 50HzBattery Size 10-240 AhBattery Type Lead Acid, LiFePO4Battery Chemistry AGM, Gel, Calcium or Wet, LiFePO4Charger Type Ten-stage – micro digital processorPower Supply Mode 12V  
BMPRO BATTERYCHARGE4 4 Amp | 6V and 12V Battery Charger - Micks Gone Bush
BMPRO BATTERYCHARGE4 4 Amp | 6V and 12V Battery Charger $95.00
KEY FEATURES Multi-stage charger Ability to charge multiple battery chemistries LCD display shows charge progress Overload and reverse connection protection Capable of charging battery sizes 12-120Ah Durable dust- and water-proof casing Large clamps for easy battery connection Ring terminals to mount the charger on the battery BMPRO’s 12V 4 Amp battery charger BatteryCharge4 is an automatic battery charger with eight charge states (including pulse and trickle charge modes). It is designed to increase your battery’s life and performance. BatteryCharger4 is adjustable to 0.9, 3 or 4 Amps and compatible with all 6 and 12 Volt Lead Acid (AGM, Gel, Calcium, Wet) and LiFePO4 Lithium batteries. Use it to service your car, caravan, bike, boat or spare battery charging needs. Equipped with short-circuit, over-temperature and overload protection, the BatteryCharge4 has a large LCD display with indicators to let you know the charge progress of your battery. PRODUCT SPECIFICATIONS Output variable up to 4.0 AmpsInput 240V, 50HzBattery Size 12-120 AhBattery Type Lead Acid, LiFePO4Battery Chemistry AGM, Gel, Calcium or Wet, LiFePO4Charger Type Multi-stagePower Supply Mode 12V
BATTERIES
THIS IS A SUBHEADING

Check out this section's heading

-11% sale
REDARC The Manager30 S2 - Micks Gone Bush
REDARC The Manager30 S2 $1,786.00 $2,005.00
 The Manager30 is a complete battery management system for charging auxiliary batteries used in recreational automotive and marine applications. The dual battery system incorporates AC, DC, and solar inputs to achieve the best charge for an auxiliary battery.Developed with ease of installation in mind, The Manager30 is compatible with all vehicles and alternator systems including variable voltage alternators.Whether you’re charging Lead Acid, Gel, Calcium, AGM, or Lithium Iron Phosphate batteries, The Manager30 represents a complete DC to DC charging and maintenance solution. If you’re charging one auxiliary battery or more, The Manager30 will ensure they’re always fully charged, providing peace of mind when battery charge provides the power source for the comforts of home whilst traveling around Australia.The Manager30 operates like 6 separate products, it charges an auxiliary battery from the vehicle while on the move, it’s a 240-volt charger, a solar regulator, a battery isolator, a load disconnect controller, all with a remote battery monitor, making it market-leading. Charging lithium batteries Lithium batteries have improved storage capacity relative to size and weight. They do however require specific charging conditions in order to operate correctly and the battery itself must have an in-built cell management system. REDARC has designed a charging profile within The Manager30 to complement these in-built systems.   Green power priority The Manager30 is designed to charge an auxiliary battery from multiple sources simultaneously. If 12 volt solar power is available, solar power will be used before topping up the output charging current from another source mains (if available) or DC vehicle power when on the move.   MPPT solar regulator The built-in Maximum Power Point Tracking (MPPT) solar regulator allows The Manager30 to deliver the maximum amount of power from portable solar panels, even during low light conditions.   Remote monitor Designed to show you auxiliary battery information and charge status. You can customize how your battery is charged and monitor where the charge is coming from. A user-friendly, graphical display monitor lets you know what’s going on, keeping you in control at all times.   Features Multi-Stage AC-DC Battery Charger Multi-Stage DC to DC Charger Maximum Power Point Tracking Solar Regulator Battery Monitor Dual Battery Isolator Load Disconnect Controller Super quiet operation Charges AGM, Gel, Calcium content, VRLA, Standard Lead Acid, and LiFePO4 batteries Tested to mains power safety standards in Australia Specifications Output System Voltage 12VDC Maximum Charging Voltage 16.0V* (*Calcium setting in storage mode) Output Current Rating (Cont.) 30A Output Power 520W Input Fuse Rating 40A Output Fuse Rating 40A Warranty 2 Years Protection Short Circuit, Surge, Reverse Polarity, Overload Input (Operating) Voltage 240VAC / 9 - 32VDC Length (mm) 445 Width (mm) 185 Height (mm) 79 Weight (kg) 5.5 AC Mains Plug Type AU, NZ, EU Type Approval CE Videos
-3% sale
REDARC The Manager30 with RedVision display - Micks Gone Bush
REDARC The Manager30 with RedVision display $2,298.00 $2,350.00
    BMS1230S3R Manual The Manager30 BMS1230S3R features both the RedVision display screen and mobile phone connectivity for complete battery management for charging auxiliary batteries used in recreational automotive and marine applications. The dual battery system incorporates AC, DC and solar inputs to achieve the best charge for an auxiliary battery. This 30amp charger is the complete battery management system that gives you the best of both worlds. Whether you’re free camping or on a powered site, it knows how to take charge and keep auxiliary batteries fully charged. The Manager30 operates like 6 separate products, it charges an auxiliary battery from the vehicle while on the move, it’s a 240-volt charger, a solar regulator, a battery isolator, a load disconnect controller, all with a remote coloured RedVision battery monitor, making it market-leading. The RedVision remote battery monitor is designed to show auxiliary battery information and charge status through its coloured display. You can customise how your battery is charged and monitor where it is coming from. It also provides full connectivity to the Manager30 via the RedVision Smartphone App on both Apple and Android devices. Whether you’re charging Lead Acid, Gel, Calcium, AGM or Lithium Iron Phosphate batteries, The Manager30 represents a complete DC to DC charging and maintenance solution. If you’re charging one auxiliary battery or more, The Manager30 will ensure they’re always fully charged, providing peace of mind when battery charge provides the power source for the comforts of home whilst travelling around Australia. Developed with ease of installation in mind, The Manager30 is compatible with all vehicles and alternator systems including variable voltage alternators.   RedVision monitor The Manager30 comes with a display designed to give you house battery information and charge status along with critical system information while charging is in progress. With the display, you can customise how your house battery is charged and monitor where the charge is coming from, keeping you in control at all times. The display can be surface mounted on a wall or recessed (into the dashboard of an RV for example). The display also allows a Bluetooth connection to your Smartphone, via the RedVision App, which provides the same data and control available on the display all in the palm of your hand.   Charging lithium batteries Lithium batteries (LiFeP04) have improved storage capacity relative to size and weight. They do however require specific charging conditions in order to operate correctly and the battery itself must have an in-built cell management system. REDARC have designed a charging profile within The Manager30 to complement these in-built systems.   Green power priority The Manager30 is designed to charge an auxiliary battery from multiple sources simultaneously. If 12-volt solar power is available, solar power will be used before topping up the output charging current from another source mains (if available) or DC vehicle power when on the move.   MPPT solar regulator The built-in Maximum Power Point Tracking (MPPT) solar regulator allows The Manager30 to deliver the maximum amount of power from portable solar panels, even during low light conditions.   Features          Multi-Stage AC-DC Battery Charger          Multi-Stage DC to DC Charger          Maximum Power Point Tracking Solar Regulator          Improved, 4.3” coloured RedVision display battery monitor          RedVision display allows connection to Smartphone via App          Dual Battery Isolator          Load Disconnect Controller          Super quiet operation          Charges AGM, Gel, Calcium content, VRLA, Standard Lead Acid and LiFePO4 batteries          Tested to mains power safety standards in Australia Specifications Output System Voltage 12VDC Maximum Charging Voltage 16.0V* (*Calcium setting in storage mode) Output Current Rating (Cont.) 30A Output Power 520W Input Fuse Rating 50A Output Fuse Rating 40A Protection Short Circuit, Surge, Reverse Polarity, Overload Input (Operating) Voltage 220-240VAC / 9 - 32VDC Length (mm) 445 Width (mm) 185 Weight (kg) 5.5 AC Mains Plug Type AU, NZ, EU Type Approval CE Warranty 2 Years
-4% sale
REDARC Manager30 S3 - Micks Gone Bush
REDARC Manager30 S3 $1,930.00 $1,999.00
The next-generation Manager30 S3 model is the complete battery management system for charging auxiliary batteries used in 4wd, camper recreational automotive, and marine applications. The dual battery system incorporates AC, DC, and solar inputs to achieve the best charge for an auxiliary battery. Has been developed with ease of installation in mind, The Manager30 is compatible with all vehicles and alternator systems including variable voltage alternators. Whether you’re charging Lead Acid, Gel, Calcium, AGM, or Lithium Iron Phosphate batteries, The Manager30 represents a complete DC to DC charging and maintenance solution. If you’re charging one auxiliary battery or more, The Manager30 will ensure they’re always fully charged, providing peace of mind when battery charge provides the power source for the comforts of home whilst travelling around Australia. The Manager30 operates like 6 separate products, it charges an auxiliary battery from the vehicle while on the move, it’s a 240-volt charger, a solar regulator, a battery isolator, a load disconnect controller, all with a remote battery monitor, making it market-leading.   Charging lithium batteries Lithium batteries have improved storage capacity relative to size and weight. They do however require specific charging conditions in order to operate correctly and the battery itself must have an in-built cell management system. REDARC has designed a charging profile within The Manager30 to complement these in-built systems.   Green power priority The Manager30 is designed to charge an auxiliary battery from multiple sources simultaneously. If 12-volt solar power is available, solar power will be used before topping up the output charging current from another source mains (if available) or DC vehicle power when on the move.   MPPT solar regulator The built-in Maximum Power Point Tracking (MPPT) solar regulator allows The Manager30 to deliver the maximum amount of power from portable solar panels, even during low light conditions.   Remote monitor Designed to show you auxiliary battery information and charge status. You can customize how your battery is charged and monitor where the charge is coming from. A user-friendly, graphical display monitor lets you know what’s going on, keeping you in control at all times.   Features Multi-Stage AC-DC Battery Charger Multi-Stage DC to DC Charger Maximum Power Point Tracking Solar Regulator Battery Monitor Dual Battery Isolator Load Disconnect Controller Super quiet operation Charges AGM, Gel, Calcium content, VRLA, Standard Lead Acid, and LiFePO4 batteries Tested to mains power safety standards in Australia   Charging lithium batteries Lithium batteries have improved storage capacity relative to size and weight. They do however require specific charging conditions in order to operate correctly and the battery itself must have an in-built cell management system. REDARC has designed a charging profile within The Manager30 to complement these in-built systems.   Green power priority The Manager30 is designed to charge an auxiliary battery from multiple sources simultaneously. If 12-volt solar power is available, solar power will be used before topping up the output charging current from another source mains (if available) or DC vehicle power when on the move.   MPPT solar regulator The built-in Maximum Power Point Tracking (MPPT) solar regulator allows The Manager30 to deliver the maximum amount of power from portable solar panels, even during low light conditions.   Remote monitor Designed to show you auxiliary battery information and charge status. You can customize how your battery is charged and monitor where the charge is coming from. A user-friendly, graphical display monitor lets you know what’s going on, keeping you in control at all times.   Multi-Stage AC-DC Battery Charger Multi-Stage DC to DC Charger Maximum Power Point Tracking Solar Regulator Battery Monitor Dual Battery Isolator Load Disconnect Controller Super quiet operation Charges AGM, Gel, Calcium content, VRLA, Standard Lead Acid and LiFePO4 batteries Tested to mains power safety standards in Australia   SPECIFICATIONS   Output System Voltage 12VDC Maximum Charging Voltage 16.0V* (*Calcium setting in storage mode) Output Current Rating (Cont.) 30A Output Power 520W Input Fuse Rating 40A Output Fuse Rating 40A Warranty 2 Years Protection Short Circuit, Surge, Reverse Polarity, Overload Input (Operating) Voltage 240VAC / 9 - 32VDC Length (mm) 445 Width (mm) 185 Height (mm) 79 Weight (kg) 5.5 AC Mains Plug Type AU, NZ, EU Type Approval CE   VIDEOS

Enerdrive 4WD Canopy Systems

Designed for the end user requiring maximum power requirements along with AC charging ability and 230v Inverter power.  In addition to the Explorer & Traveller, The Adventurer consists of the following extra items;

Shop Now