BATTERIES (11)

Revolution Power 12v 100Ah Lithium Battery. Save on GVM with Revolution Power lithium batteries. The ultimate in deep-cycle battery technology delivering unrivaled performance and product life span. Australia’s most advanced state-of-the-art Battery Management System (BMS) inbuilt ensures peace of mind when it comes to battery protection and safety.   SPECIFICATIONS    Lighter Weight: Up to 1/3 the weight of traditional AGM batteries Faster Recharge: 5x faster recharge times than AGM’s Longer Life Cycle: Up to 5000 cycles at 50% depth of discharge Extremely Low Self-Discharge Rate: can sit unused for long periods of time Purposely Built: for Caravans, Camper trailers, Motor homes, 4WD, Marine Vessels, Trucks Proudly Australian Owned and Operated Built-in Battery Management System: Controls cell balancing, over and under-voltage protection, short circuit protection, thermal protection Proven Parallel Ability: Use in parallel to increase your capacity for longer storage High Discharge Rate: holds voltage under high discharge Flat Discharge Curve: longer run time and more efficient Safety: LiFePO4 is the safest and most stable of all lithium chemistries reducing associated risks. Weight 12.8 kgDimensions 305 × 165 × 215 cm      

Revolution Power Australia’s lithium batteries are the ultimate in deep-cycle battery technology delivering unrivaled performance and product life span. Australia’s most advanced state of the art Battery Management System (BMS) inbuilt ensures peace of mind when it comes to battery protection and safety. one of the best Lithium Batteries in Australia. 50 AMP Continuous Power Draw Ideal For A 500 WATT Inverter (max)  Lighter Weight: Up to 1/3 the weight of traditional AGM batteries Faster Recharge: 5x faster recharge times than AGM’s Longer Life Cycle: Up to 5000 cycles at 50% depth of discharge Extremely Low Self-Discharge Rate: can sit unused for long periods of time Purposely Built: for Caravans, Camper trailers, Motor homes, 4WD, Marine Vessels, Trucks Built-in Battery Management System: Controls cell balancing, over and under-voltage protection, short circuit protection, thermal protection Proven Parallel Ability: Use in parallel to increase your capacity for longer storage Flat Discharge Curve: longer run time and more efficient Safety: LiFePO4 is the safest and most stable of all lithium chemistries reducing associated risks Proudly Australian Owned and Operated   SPECIFICATIONS Electrical Specifications Total Capacity    125Ah    Usable Capacity (C20, 25ºC)    100Ah    C20 Rating (usable amps to 10.5v)    100    Nominal Voltage    12.8v    Self-Discharge Rate    ≤ 3%    Short Circuit Protection    200-500us    Discharge Specifications        Maximum Continuous Discharge (BMS)    50A    Peak Discharge Current (BMS)    100A Pulse 2-4 sec    Cell Discharge rating    .5C    Discharge Cut-Off Voltage    10.0v    Life Cycles 80% DOD    2000    Life Cycles 50% DOD    5000    Operating Temperatures        Optimum Temperature Range    0 ~45 ºC    Operational Temperature Range    -20 ~ 60 ºC    Storage Temperature Range    -40 ~ 120 ºC    Mechanical SpecificationsDimension (L x W x H)    305x168x215mmWeight    12.8KgCell Type    Prismatic Pouch CellsCell Chemistry    LiFePO4Case Material    Polycarbonate IP54Terminal Type    M8     Charge Specifications    Recommended Charge Current    5A – 30AMaximum Charge Current    30ARecommended Charge Voltage    14.6V ± 0.2VBMS Charge Cut Off Voltage    15.6vApproved For Use In Internal/Enclosed Area     Compliance    Certifications and Testing    ISO9001 Certified    CE Certified    RoHS Certified    UN38.3 Certified    SGS Audited    Intertek Audited    IEC Certified Weight    1398.00 kgDimensions    305 × 165 × 215 cm VIDEOS  

Revolution Power Australia’s lithium batteries are the ultimate in deep-cycle battery technology delivering unrivalled performance and product life span. Australia’s most advanced state of the art Battery Management System (BMS) inbuilt ensures peace of mind, when it comes to battery protection and safety. Lighter Weight: Up to 1/3 the weight of traditional AGM batteries Faster Recharge: 5x faster recharge times than AGM’s Longer Life Cycle: Up to 5000 cycles at 50% depth of discharge Extremely Low Self-Discharge Rate: can sit unused for longer periods of time Purposely Built: for Caravans, Camper trailers, Motor homes, 4WD, Marine Vessels, Trucks Proudly Australian Owned and Operated Built-in Battery Management System: Controls cell balancing, over and under voltage protection, short circuit protection, thermal protection Proven Parallel Ability: Use in parallel to increase your capacity for longer storage High Discharge Rate: holds voltage under high discharge Flat Discharge Curve: longer run time and more efficient Safety: LiFePO4 is the safest and most stable of all lithium chemistries reducing associated risks     SPECIFICATIONS     VIDEOS

Lithium Batteries Revolution Power 85 AMP Continuous Draw. Lithium Battery 12v 60Ah 4wd, caravan, camper dual battery system. Revolution Power Australia’s lithium batteries are the ultimate in deep-cycle battery technology delivering unrivalled performance and product life span. Australia’s most advanced state of the art Battery Management System (BMS) inbuilt ensures peace of mind when it comes to battery protection and safety. 850 WATT Inverter Lighter Weight: Up to 1/3 the weight of traditional AGM batteries Faster Recharge: 5x faster recharge times than AGM’s Longer Life Cycle: Up to 5000 cycles at 50% depth of discharge Extremely Low Self-Discharge Rate: can sit unused for long periods of time Purposely Built: for Caravans, Camper trailers, Motor homes, 4WD, Marine Vessels, Trucks Proudly Australian Owned and Operated Built-in Battery Management System: Controls cell balancing, over and under-voltage protection, short circuit protection, thermal protection Proven Parallel Ability: Use in parallel to increase your capacity for longer storage High Discharge Rate: holds voltage under high discharge Flat Discharge Curve: longer run time and more efficient Safety: LiFePO4 is the safest and most stable of all lithium chemistries reducing associated risks SPECIFICATIONS     VIDEOS  

Invicta 12V 125Ah Lithium Battery with Bluetooth, 7 year warranty. The Invicta Lithium 12V range has been specifically designed for replacement of similar size Lead acid batteries. The family is comprised of the popular sizes found in the lead acid range but with the added benefits of Lithium Iron Phosphate (LiFePO4) technology and is ideally suited to deep cycle longer run time applications. Invicta batteries are available in 12V, 24V and 36V single battery systems. They are used in a range of applications including 4×4, caravans, marine and commercial/industrial. Invicta uses aluminium encased LiFePO4 prismatic cells that are bolted together using a solid busbar for strength. A strengthening frame is also utilised to reduce movement and vibration often associated in off-road vehicles and marine applications. Invicta batteries also have an integrated BMS that protects the battery from over charge/discharge, temperature, and short circuit. Invicta 12V200Ah and 12V300Ah also include inverter friendly capabilities.   Features: Large number of cycles >2000 (100% DoD) Up to 8 times cycle life of SLA lowering your total cost of ownership. Safe and stable chemistry & Integrated BMS The use of LiFePO4 along with the integrated BMS ensures protection against over charge / discharge, temperature and short circuit providing the highest degree of safety. Greater capacity utilisation – 60% more than SLA Gives longer runtime than equivalent SLA. High energy density (less than half of the weight of SLA) Lowering total weight of application. Fast recharge Battery is charged and ready to be used sooner. Flat Discharge Curve Longer run time & more efficient use of capacity. Extremely low self-discharge rate Can sit unused for longer periods of time. UL1642 at cell level.   Bluetooth Capabilities: Bluetooth monitoring is available on selected models via a free mobile application. The app allows you to monitor the status of the battery’s volts, remaining capacity, current draw, and status of the Battery Management System (BMS). The Bluetooth capabilities can also be used to help troubleshoot system issues.   Tested Independently: The Invicta batteries are independently tested by BMRPO to ensure the highest standard of quality. The real-life testing shows that Invicta easily surpassed over 2000 cycles over 1000 days of continuous use under Australian conditions.   Commercial and Industrial Applications: Invicta is used in both commercial and industrial applications. The Invicta batteries are IEC 62619 (selected models) and IEC 62133 certified. These certifications are independent and rigorous tests that ensures the battery and BMS can withstand short circuit, propagation, high impact, thermal abuse (extreme heat and cold), and over-charge and discharge situations.   Series and Parallel Configurations: The Invicta batteries are capable of being paralleled. Please see the Installation Guide for conditions.   Safety Notes: Invicta batteries can be installed on either of its sides however not upside down Invicta batteries are not for under bonnet use Invicta batteries are not for starting applications Invicta batteries must use a charger with a lithium profile setting When using an inverter with an Invicta battery ensure that the in-rush current of the inverter does not exceed the pulse discharge of the battery Specifications Amp Hours (Ah) 125.0 Ah Battery Voltage 12V Standby Current 13.8V Operating Range (temp) Charge (0-50), Discharge (-20 – 55) Nominal Voltage 12.8v Nominal Capacity 125Ah Total Charge Current 80A Cycle Life (DOD – 80% under controlled conditions) >2000 Maximum Charge Current 14.6V Recommended Charge Current for Maximum Life <60A Maximum Discharge Current 100A Pulse Discharge Current 350A Charge Cut-off Voltage 10V Dimensions 318 x 165 x 215 mm (L x W x H) Certification IEC 62619 & IEC 62133 Net Weight (kg) 14.8 Kg Manufacturers Warranty 7 Years – Please see Warranty Tab for full Terms & Conditions

Features & Benefits with Lithium • Large number of cycles >2000 (100% DoD) Up to 8 times cycle life of SLA lowering your total cost of ownership • Safe and stable chemistry & Integrated BMS The use of LiFePO4 along with the integrated BMS ensures protection against over charge / discharge, temperature and short circuit providing the highest degree of safety • Greater capacity utilization – 60% more than SLA Gives longer run-time than equivalent SLA • High energy density (less than half of the weight of SLA) • Fast recharge   Invicta Lithium is a premium range of the highest quality Lithium Iron Phosphate (LiFePO4) composition. Lithium Iron Phosphate (LiFePO4) was selected for our Invicta range due to its inherent safety features. When comparing LiFePO4 to other Lithium technologies there are some distinct safety advantages. These advantages include greater tolerance to both high temperatures and abuse such as overcharging, short circuit and penetration. As a result of these features the risk of fire is extremely low even under harsh circumstances. As well as utilizing LiFePO4 technology, the Invicta lithium range of batteries also includes a built in Battery Monitoring System (BMS) to further protect against over charge or discharge, over temperature and short circuit all critical for the safety of the battery. As an added benefit, Phosphate is not a hazardous material and so is friendly both to the environment and health. The Invicta Lithium range now comes with IEC Certification on both the BMS and Cells*. This certification has been obtained through thorough testing of the product and a complete audit of the factory. The IEC Certification is a huge tick of approval for safety and quality, and peace of mind. The Invicta Lithium range comes with all the benefits of LiFePO4 composition in either the standard 12V SLA case sizes or 24V versions for larger applications With 3.2V per cell the Invicta Lithium range is ideally suited for replacement of equivalent size SLA with the extra benefits of up to 8 times the cycle life, greater utilization of available capacity through increased Depth of Discharge (DOD) and fast charging. All of this at close to half the weight makes them ideal for deep cycle and mobility applications. With the all new SNL range you can even monitor the health and status of your batteries on your phone via Bluetooth wireless communication. Feature & Benefits IEC Certification on the combination of BMS and individual cell for complete safety peace of mind High energy density (less than half the weight of SLA) lowering total weight of application Fast recharge, battery is charged and ready to be used sooner Flat discharge curve, longer run time and more efficient use of capacity Extremely low self-discharge rate, can sit unused for longer periods of time Large numbers of cycles >2000 (100% DoD), up to 8 times cycle life of SLA lowering your total cost of ownership Safe and stable chemistry and integrated BMS, the use of LiFePO4 along with integrated BMS ensures protection against over charge/discharge, temperature and short circuit providing the highest degree of safety. Bluetooth versions available, monitor the health and state of your battery from your phone Greater capacity utilization 60% more than SLA, gives longer runtime than equivalent SLA Applications Mobility Devices Caravan , 4WD and camping Solar energy Storage UPS and Critical power Personal power packs Medical Equipment SPECIFICATIONS: Short Description Invicta 12V 100Ah Lithium Battery with Bluetooth, 7 Year Warranty SKU SNL12V100BT GTIN (Global Trade Item Number) 721802213237 Brands Invicta Amp Hours (Ah) 100.0 Ah Battery Voltage 12V Standby Current 13.8V Operating Range (temp) Charge (0-50), Discharge (-20 – 55) Nominal Voltage 12.8v Nominal Capacity 100Ah Total Charge Current 95A Cycle Life (DOD – 80% under controlled conditions) >2000 Maximum Charge Current 14.6V Recommended Charge Current for Maximum Life <50A Maximum Discharge Current 95A Pulse Discharge Current 350A Charge Cut-off Voltage 10V Dimensions 306 x 168 x 216 mm (L x W x H) Certification IEC 62619 & IEC 62133 Net Weight (kg) 12.2 Kg Manufacturers Warranty 7 Years – Please see Warranty Tab for full Terms & Conditions  

Invicta 12V 200Ah Lithium Battery with Bluetooth, 7 year warranty. The Invicta Lithium 12V range has been specifically designed for replacement of similar size Lead acid batteries. The family is comprised of the popular sizes found in the lead acid range but with the added benefits of Lithium Iron Phosphate (LiFePO4) technology and is ideally suited to deep cycle longer run time applications. Invicta batteries are available in 12V, 24V and 36V single battery systems. They are used in a range of applications including 4×4, caravans, marine and commercial/industrial. Invicta uses aluminium encased LiFePO4 prismatic cells that are bolted together using a solid busbar for strength. A strengthening frame is also utilised to reduce movement and vibration often associated in off-road vehicles and marine applications. Invicta batteries also have an integrated BMS that protects the battery from over charge/discharge, temperature, and short circuit. Invicta 12V200Ah and 12V300Ah also include inverter friendly capabilities. Features: Large number of cycles >2000 (100% DoD) Up to 8 times cycle life of SLA lowering your total cost of ownership. Safe and stable chemistry & Integrated BMS The use of LiFePO4 along with the integrated BMS ensures protection against over charge / discharge, temperature and short circuit providing the highest degree of safety. Greater capacity utilisation – 60% more than SLA Gives longer runtime than equivalent SLA. High energy density (less than half of the weight of SLA) Lowering total weight of application. Fast recharge Battery is charged and ready to be used sooner. Flat Discharge Curve Longer run time & more efficient use of capacity. Extremely low self-discharge rate Can sit unused for longer periods of time. UL1642 at cell level. Bluetooth Capabilities: Bluetooth monitoring is available on selected models via a free mobile application. The app allows you to monitor the status of the battery’s volts, remaining capacity, current draw, and status of the Battery Management System (BMS). The Bluetooth capabilities can also be used to help troubleshoot system issues. Tested Independently: The Invicta batteries are independently tested by BMRPO to ensure the highest standard of quality. The real-life testing shows that Invicta easily surpassed over 2000 cycles over 1000 days of continuous use under Australian conditions. Commercial and Industrial Applications: Invicta is used in both commercial and industrial applications. The Invicta batteries are IEC 62619 (selected models) and IEC 62133 certified. These certifications are independent and rigorous tests that ensures the battery and BMS can withstand short circuit, propagation, high impact, thermal abuse (extreme heat and cold), and over-charge and discharge situations. Series and Parallel Configurations: The Invicta batteries are capable of being paralleled. Safety Notes: Invicta batteries can be installed on either of its sides however not upside down Invicta batteries are not for under bonnet use Invicta batteries are not for starting applications Invicta batteries must use a charger with a lithium profile setting When using an inverter with an Invicta battery ensure that the in-rush current of the inverter does not exceed the pulse discharge of the battery Specifications Amp Hours (Ah) 200.0 Ah Battery Voltage 12V Operating Range (temp) Charge (0-50), Discharge (-20 – 55) Nominal Voltage 12.8V Nominal Capacity 200Ah Cycle Life (DOD – 80% under controlled conditions) >2000 Dimensions 483 x 170 x 241 mm (L x W x H) Certification IEC 62619 & IEC 62133 Net Weight (kg) 24.2 Kg Manufacturers Warranty 7 Years – Please see Warranty Tab for full Terms & Conditions

Invicta 12V 75Ah Lithium Battery with 4 Series Functionality, 7 year warranty. The Invicta Lithium 12V range has been specifically designed for replacement of similar size Lead acid batteries. The family is comprised of the popular sizes found in the lead acid range but with the added benefits of Lithium Iron Phosphate (LiFePO4) technology and is ideally suited to deep cycle longer run time applications. Invicta batteries are available in 12V, 24V and 36V single battery systems. They are used in a range of applications including 4×4, caravans, marine and commercial/industrial. Invicta uses aluminium encased LiFePO4 prismatic cells that are bolted together using a solid busbar for strength. A strengthening frame is also utilised to reduce movement and vibration often associated in off-road vehicles and marine applications. Invicta batteries also have an integrated BMS that protects the battery from over charge/discharge, temperature, and short circuit. Invicta 12V200Ah and 12V300Ah also include inverter friendly capabilities. Features: Large number of cycles >2000 (100% DoD) Up to 8 times cycle life of SLA lowering your total cost of ownership. Safe and stable chemistry & Integrated BMS The use of LiFePO4 along with the integrated BMS ensures protection against over charge / discharge, temperature and short circuit providing the highest degree of safety. Greater capacity utilisation – 60% more than SLA Gives longer runtime than equivalent SLA. High energy density (less than half of the weight of SLA) Lowering total weight of application. Fast recharge Battery is charged and ready to be used sooner. Flat Discharge Curve Longer run time & more efficient use of capacity. Extremely low self-discharge rate Can sit unused for longer periods of time. UL1642 at cell level. Tested Independently: The Invicta batteries are independently tested by BMRPO to ensure the highest standard of quality. The real-life testing shows that Invicta easily surpassed over 2000 cycles over 1000 days of continuous use under Australian conditions. Commercial and Industrial Applications: Invicta is used in both commercial and industrial applications. The Invicta batteries are IEC 62619 (selected models) and IEC 62133 certified. These certifications are independent and rigorous tests that ensures the battery and BMS can withstand short circuit, propagation, high impact, thermal abuse (extreme heat and cold), and over-charge and discharge situations. Series and Parallel Configurations: The Invicta batteries are capable of being paralleled. Safety Notes: Invicta batteries can be installed on either of its sides however not upside down Invicta batteries are not for under bonnet use Invicta batteries are not for starting applications Invicta batteries must use a charger with a lithium profile setting When using an inverter with an Invicta battery ensure that the in-rush current of the inverter does not exceed the pulse discharge of the battery Specifications Amp Hours (Ah) 75.0 Ah Battery Voltage 12V Standby Current 13.8V Operating Range (temp) Charge (0-50), Discharge (-20 – 55) Nominal Voltage 12.8v Nominal Capacity 75Ah Total Charge Current 50A Cycle Life (DOD – 80% under controlled conditions) >2000 Maximum Charge Current 50V Recommended Charge Current for Maximum Life <30A Maximum Discharge Current 50A Pulse Discharge Current 150A Charge Cut-off Voltage 10V Dimensions 260 x 169 x 215 mm (L x W x H) Certification IEC 62619 & IEC 62133 Net Weight (kg) 9.8 Kg Manufacturers Warranty 7 Years – Please see Warranty Tab for full Terms & Conditions

Invicta 12V 300Ah Lithium Battery with Bluetooth, 7 year warranty. The Invicta Lithium 12V range has been specifically designed for replacement of similar size Lead acid batteries. The family is comprised of the popular sizes found in the lead acid range but with the added benefits of Lithium Iron Phosphate (LiFePO4) technology and is ideally suited to deep cycle longer run time applications. Invicta batteries are available in 12V, 24V and 36V single battery systems. They are used in a range of applications including 4×4, caravans, marine and commercial/industrial. Invicta uses aluminium encased LiFePO4 prismatic cells that are bolted together using a solid busbar for strength. A strengthening frame is also utilised to reduce movement and vibration often associated in off-road vehicles and marine applications. Invicta batteries also have an integrated BMS that protects the battery from over charge/discharge, temperature, and short circuit. Invicta 12V200Ah and 12V300Ah also include inverter friendly capabilities. Features: Large number of cycles >2000 (100% DoD) Up to 8 times cycle life of SLA lowering your total cost of ownership. Safe and stable chemistry & Integrated BMS The use of LiFePO4 along with the integrated BMS ensures protection against over charge / discharge, temperature and short circuit providing the highest degree of safety. Greater capacity utilisation – 60% more than SLA Gives longer runtime than equivalent SLA. High energy density (less than half of the weight of SLA) Lowering total weight of application. Fast recharge Battery is charged and ready to be used sooner. Flat Discharge Curve Longer run time & more efficient use of capacity. Extremely low self-discharge rate Can sit unused for longer periods of time. UL1642 at cell level. Bluetooth Capabilities: Bluetooth monitoring is available on selected models via a free mobile application. The app allows you to monitor the status of the battery’s volts, remaining capacity, current draw, and status of the Battery Management System (BMS). The Bluetooth capabilities can also be used to help troubleshoot system issues. Tested Independently: The Invicta batteries are independently tested by BMRPO to ensure the highest standard of quality. The real-life testing shows that Invicta easily surpassed over 2000 cycles over 1000 days of continuous use under Australian conditions. Commercial and Industrial Applications: Invicta is used in both commercial and industrial applications. The Invicta batteries are IEC 62619 (selected models) and IEC 62133 certified. These certifications are independent and rigorous tests that ensures the battery and BMS can withstand short circuit, propagation, high impact, thermal abuse (extreme heat and cold), and over-charge and discharge situations. Series and Parallel Configurations: The Invicta batteries are capable of being paralleled. Safety Notes: Invicta batteries can be installed on either of its sides however not upside down Invicta batteries are not for under bonnet use Invicta batteries are not for starting applications Invicta batteries must use a charger with a lithium profile setting When using an inverter with an Invicta battery ensure that the in-rush current of the inverter does not exceed the pulse discharge of the battery Specifications Amp Hours (Ah) 300.0 Ah Battery Voltage 12V Standby Current 13.8V Operating Range (temp) Charge (0-50), Discharge (-20 – 55) Nominal Voltage 12.8v Nominal Capacity 300Ah Total Charge Current 80A Cycle Life (DOD – 80% under controlled conditions) >2000 Maximum Charge Current 14.6V Recommended Charge Current for Maximum Life <80A Maximum Discharge Current 200A Pulse Discharge Current 350A Charge Cut-off Voltage 10V Dimensions 518 x 271 x 222 mm (L x W x H) Certification IEC 62619 & IEC 62133 Net Weight (kg) 35.0 Kg Manufacturers Warranty 7 Years – Please see Warranty Tab for full Terms & Conditions

Features & Benefits with Lithium • Large number of cycles >2000 (100% DoD) Up to 8 times cycle life of SLA lowering your total cost of ownership • Safe and stable chemistry & Integrated BMS The use of LiFePO4 along with the integrated BMS ensures protection against over charge / discharge, temperature and short circuit providing the highest degree of safety • Greater capacity utilization – 60% more than SLA Gives longer run-time than equivalent SLA • High energy density (less than half of the weight of SLA) • Fast recharge   Invicta Lithium is a premium range of the highest quality Lithium Iron Phosphate (LiFePO4) composition. Lithium Iron Phosphate (LiFePO4) was selected for our Invicta range due to its inherent safety features. When comparing LiFePO4 to other Lithium technologies there are some distinct safety advantages. These advantages include greater tolerance to both high temperatures and abuse such as overcharging, short circuit and penetration. As a result of these features the risk of fire is extremely low even under harsh circumstances. As well as utilizing LiFePO4 technology, the Invicta lithium range of batteries also includes a built in Battery Monitoring System (BMS) to further protect against over charge or discharge, over temperature and short circuit all critical for the safety of the battery. As an added benefit, Phosphate is not a hazardous material and so is friendly both to the environment and health. The Invicta Lithium range now comes with IEC Certification on both the BMS and Cells*. This certification has been obtained through thorough testing of the product and a complete audit of the factory. The IEC Certification is a huge tick of approval for safety and quality, and peace of mind. The Invicta Lithium range comes with all the benefits of LiFePO4 composition in either the standard 12V SLA case sizes or 24V versions for larger applications With 3.2V per cell the Invicta Lithium range is ideally suited for replacement of equivalent size SLA with the extra benefits of up to 8 times the cycle life, greater utilization of available capacity through increased Depth of Discharge (DOD) and fast charging. All of this at close to half the weight makes them ideal for deep cycle and mobility applications. With the all new SNL range you can even monitor the health and status of your batteries on your phone via Bluetooth wireless communication. Feature & Benefits IEC Certification on the combination of BMS and individual cell for complete safety peace of mind High energy density (less than half the weight of SLA) lowering total weight of application Fast recharge, battery is charged and ready to be used sooner Flat discharge curve, longer run time and more efficient use of capacity Extremely low self-discharge rate, can sit unused for longer periods of time Large numbers of cycles >2000 (100% DoD), up to 8 times cycle life of SLA lowering your total cost of ownership Safe and stable chemistry and integrated BMS, the use of LiFePO4 along with integrated BMS ensures protection against over charge/discharge, temperature and short circuit providing the highest degree of safety. Bluetooth versions available, monitor the health and state of your battery from your phone Greater capacity utilization 60% more than SLA, gives longer runtime than equivalent SLA Applications Mobility Devices Caravan , 4WD and camping Solar energy Storage UPS and Critical power Personal power packs Medical Equipment Invicta 12V100AH Slimline with Bluetooth Information Links:Nominal Voltage 12.8v Nominal Capacity (250C, 0.33C) 100Ah Terminal M8 Length (mm) 551 ± 2mm Width (mm) 109 ± 2mm Height (mm) 239 ± 2mm Weight 12.4kg Max Charge Voltage 14.6 ± 0.1V Standby 13.8 ± 0.1V Cut off Voltage 10V Max. Discharge Current (30 mins) 95A Max. Pulse Discharge Current (3 Sec) 250A Max. Charge Current 60A Recommended Current Charge < 50A Cycle Life (100% DoD) > 2000 Operating Temp – Charge 0 – 500C Operating Temp – Discharge -20 – 550C Short Circuit Release Load Release Max. Series / Parallel Configuration 4P Bluetooth Connectivity Yes  

Features & Benefits with Lithium • Large number of cycles >2000 (100% DoD) Up to 8 times cycle life of SLA lowering your total cost of ownership • Safe and stable chemistry & Integrated BMS The use of LiFePO4 along with the integrated BMS ensures protection against over charge / discharge, temperature and short circuit providing the highest degree of safety • Greater capacity utilization – 60% more than SLA Gives longer run-time than equivalent SLA • High energy density (less than half of the weight of SLA) • Fast recharge   Invicta Lithium is a premium range of the highest quality Lithium Iron Phosphate (LiFePO4) composition. Lithium Iron Phosphate (LiFePO4) was selected for our Invicta range due to its inherent safety features. When comparing LiFePO4 to other Lithium technologies there are some distinct safety advantages. These advantages include greater tolerance to both high temperatures and abuse such as overcharging, short circuit and penetration. As a result of these features the risk of fire is extremely low even under harsh circumstances. As well as utilizing LiFePO4 technology, the Invicta lithium range of batteries also includes a built in Battery Monitoring System (BMS) to further protect against over charge or discharge, over temperature and short circuit all critical for the safety of the battery. As an added benefit, Phosphate is not a hazardous material and so is friendly both to the environment and health. The Invicta Lithium range now comes with IEC Certification on both the BMS and Cells*. This certification has been obtained through thorough testing of the product and a complete audit of the factory. The IEC Certification is a huge tick of approval for safety and quality, and peace of mind. The Invicta Lithium range comes with all the benefits of LiFePO4 composition in either the standard 12V SLA case sizes or 24V versions for larger applications With 3.2V per cell the Invicta Lithium range is ideally suited for replacement of equivalent size SLA with the extra benefits of up to 8 times the cycle life, greater utilization of available capacity through increased Depth of Discharge (DOD) and fast charging. All of this at close to half the weight makes them ideal for deep cycle and mobility applications. With the all new SNL range you can even monitor the health and status of your batteries on your phone via Bluetooth wireless communication.   Feature & Benefits IEC Certification on the combination of BMS and individual cell for complete safety peace of mind High energy density (less than half the weight of SLA) lowering total weight of application Fast recharge, battery is charged and ready to be used sooner Flat discharge curve, longer run time and more efficient use of capacity Extremely low self-discharge rate, can sit unused for longer periods of time Large numbers of cycles >2000 (100% DoD), up to 8 times cycle life of SLA lowering your total cost of ownership Safe and stable chemistry and integrated BMS, the use of LiFePO4 along with integrated BMS ensures protection against over charge/discharge, temperature and short circuit providing the highest degree of safety. Bluetooth versions available, monitor the health and state of your battery from your phone Greater capacity utilization 60% more than SLA, gives longer runtime than equivalent SLA Applications Mobility Devices Caravan , 4WD and camping Solar energy Storage UPS and Critical power Personal power packs Medical Equipment