Denso Air Conditioning TX Valve 90 Deg (L) Internally Equalised TXX1380

The Denso Air Conditioning TX Valve 90 Deg. (L) Internally Equalised is an air conditioning TX valve supplied as part number TXX1380. It is listed with an inlet fitting of M16 x 1.5 MCOR and an outlet fitting of M22 x 1.5 MCOR, which are the key details to check before ordering if you are matching an existing valve or pipe connection.

A 65 mm capillary is noted, along with a suction outlet fitting listed as not applicable. The unit is sold each and carries a one year warranty, which gives you a clear reference point for replacement planning on an AC component where fitting shape, port size and valve style need to line up correctly.

Key Features

• Denso air conditioning TX valve
• Part number TXX1380
• 90 degree (L) configuration
• Internally equalised TX style
• Inlet: M16 x 1.5 MCOR
• Outlet: M22 x 1.5 MCOR

Specifications

• Brand: Denso
• Product type: Air conditioning TX valve
• Part No.: TXX1380
• TX Style: Internally equalised
• TX Type: 90 Deg. (L)
• Inlet fitting: M16 x 1.5 MCOR
• Outlet fitting: M22 x 1.5 MCOR
• Suction inlet fitting: Not applicable

Fitment guidance

• Toyota Landcruiser 100 Series
• Toyota Prado rear cooling box application
• Toyota Landcruiser fitment references are listed across 1998 to 2007 in the provided application data

Application and Buying Notes

Before ordering, match the part number TXX1380 and confirm the port sizes on the vehicle side are M16 x 1.5 MCOR at the inlet and M22 x 1.5 MCOR at the outlet. The 90 degree (L) layout and internally equalised TX style are important because the valve needs to match the original arrangement, not just the general vehicle model.

This valve is sold each and is covered by a one year warranty. As with any air conditioning component, the best approach is to verify the part number, connection sizes and vehicle application before purchase, then compare the old and new valve side by side during installation where practical.

If you are not certain whether the vehicle uses the rear cooling box arrangement or whether the existing valve is the same 90 degree internally equalised type, it is safer to confirm the complete application first. Matching the fitting sizes and part number is the most reliable way to avoid ordering the wrong TX valve.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number TXX1380 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type AIR CONDITIONING TX VALVE, Unit of Measure EACH, Warranty One Year, Outlet Fitting M22 x 1.5 MCOR, TX Type 90 Deg. (L), Suction Outlet Fitting Not Applicable, Product Group 2 AC COMPONENTS, Part No. TXX1380, Brand DENSO.

Additional published details for cross-checking include Description Denso Air Conditioning TX Valve 90 Deg. (L) Internally Equalised, Inlet Fitting M16 x 1.5 MCOR, Suction Inlet Fitting Not Applicable, Note Inlet: (M16 x 1.5 MCOR) Outlet: (M22 x 1.5 MCOR), TX Style Internally Equalised, Product Group 1 COOLING.

Denso Air Conditioning TX Valve 90 Deg. (L) Internally Equalised. Part number TXX1380 should be checked first. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number TXX1380, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a air conditioning tx valve in workshop, fleet, trade, agricultural, or construction service, the listed electrical specification should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include TOYOTA LAND CRUISER, TOYOTA LAND CRUISER 1998, TOYOTA LAND CRUISER 1999, TOYOTA LAND CRUISER 2000. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

The listed warranty is One Year. Warranty terms should be considered alongside correct application and part identification, as warranty does not replace fitment confirmation.

Compatibility note: Confirm compatibility by checking the part number TXX1380, the 90 degree (L) internally equalised layout, and the inlet and outlet thread sizes before ordering. Fitment should be verified against the vehicle application and the valve currently installed.

FAQ

What is the part number for this TX valve?

The part number listed is TXX1380. For this listing, part number TXX1380 is the main reference point. Published fitment references include TOYOTA LAND CRUISER, TOYOTA LAND CRUISER 1998, TOYOTA LAND CRUISER 1999. These details should still be checked against the original unit before ordering.

What type of air conditioning valve is it?

It is an air conditioning TX valve with an internally equalised TX style and a 90 degree (L) configuration. For this listing, part number TXX1380 is the main reference point. Published fitment references include TOYOTA LAND CRUISER, TOYOTA LAND CRUISER 1998, TOYOTA LAND CRUISER 1999. These details should still be checked against the original unit before ordering.

What are the inlet and outlet fittings?

The inlet fitting is M16 x 1.5 MCOR and the outlet fitting is M22 x 1.5 MCOR. For this listing, part number TXX1380 is the main reference point. Published fitment references include TOYOTA LAND CRUISER, TOYOTA LAND CRUISER 1998, TOYOTA LAND CRUISER 1999. These details should still be checked against the original unit before ordering.

What vehicles or applications is it listed for?

It is listed for Toyota Landcruiser 100 Series and Prado rear cooling box applications. For this listing, part number TXX1380 is the main reference point. Published fitment references include TOYOTA LAND CRUISER, TOYOTA LAND CRUISER 1998, TOYOTA LAND CRUISER 1999. These details should still be checked against the original unit before ordering.

Is the suction fitting used on this valve?

No. The suction inlet fitting and suction outlet fitting are both listed as not applicable. For this listing, part number TXX1380 is the main reference point. Published fitment references include TOYOTA LAND CRUISER, TOYOTA LAND CRUISER 1998, TOYOTA LAND CRUISER 1999. These details should still be checked against the original unit before ordering.

What warranty is provided?

The valve is listed with a one year warranty. For this listing, part number TXX1380 is the main reference point. Published fitment references include TOYOTA LAND CRUISER, TOYOTA LAND CRUISER 1998, TOYOTA LAND CRUISER 1999. These details should still be checked against the original unit before ordering.