Mahle Alternator 24V 35A New Twin Leg MG369

The MAHLE alternator listed here is a 24V, 35A unit, new rather than remanufactured, and identified by part number MG369. It suits applications where a 24-volt charging system and 35 amp output are required, and it is supplied with a belt pulley fitted.

This alternator uses an internal regulator, a CW rotation, and a twin leg alternator mount. Key mounting measurements include 73mm inside mounting legs, 62.5mm mounting bores distance, 166mm mount centre to centre, and a 12mm pivot hole diameter, so it is important to compare the physical dimensions against the original unit before ordering.

The pulley details are also specific: pulley outside diameter is 81.5mm, the pulley section is A, and the unit is listed with one belt. The connector / clamp is W, and the adjusting hole diameter is 11mm, which gives a useful cross-check for electrical and mounting compatibility on the vehicle.

MAHLE states that these alternators fulfil international standards and requirements for electromagnetic compatibility, and that they are manufactured using environmentally friendly technologies and materials. As with any charging component, the correct part number, voltage, mounting style and connector style should be confirmed against the vehicle already fitted.

Key Features

• 24V charging system
• 35A output
• New unit
• Internal regulator
• Twin leg alternator mount
• Supplied with belt pulley

Specifications

• Brand: MAHLE
• Product type: Alternator
• Unit of measure: Each
• Voltage: 24
• Power rating: 35 amp
• Alternator charge current: 35A
• New / remanufactured: New
• Warranty: One year

Verified fitment applications

• FIAT 100F13
• FIAT 130
• FIAT 159.17
• FIAT 79F13
• FIAT 80F13
• FIAT 90F13
• FIAT ALLIS 65B
• FIAT ALLIS 65B 1984

Application and Buying Notes

Before buying, match the part number MG369 with the existing alternator where possible, then check the vehicle’s charging system requirements. This unit is a 24V, 35A alternator, so it is not a generic replacement for every MAHLE alternator and should only be considered where the voltage, current output, regulator type and mounting arrangement line up with the original fitment.

Physical fit is just as important as electrical fit. Compare the twin leg mount, 73mm inside mounting legs, 62.5mm mounting bores distance, 166mm mount centre to centre, 12mm pivot hole diameter and 11mm adjusting hole diameter against the removed unit. Small differences in these measurements can stop the alternator sitting correctly on the bracket or aligning with the belt.

The pulley details also need checking because this alternator is supplied with a belt pulley, has an 81.5mm outside diameter, a pulley section marked A, and is listed for one belt. If the original alternator uses a different pulley profile, belt count or rotation, that needs to be confirmed before installation.

The electrical connection is listed as W with pin code IR200. If the vehicle harness, plug style or clamp arrangement does not match, the alternator may not connect as expected even if the mount pattern appears close. It is worth checking the existing unit carefully rather than relying on general appearance alone.

This is a new alternator, not a remanufactured unit, and it carries a one-year warranty. That gives a clear point of reference for buyers who are comparing replacement options, but the warranty does not replace the need to verify fitment details such as voltage, pulley setup and connector style.

For fleet, farm or machinery applications in particular, the safest approach is to confirm the installation against the old part, the vehicle records and the physical measurements listed here. That is especially important on older FIAT, FIAT ALLIS and IVECO applications, where running changes can affect alternator mounting and pulley alignment.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number MG369 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type ALTERNATOR, Unit of Measure EACH, Warranty One Year, Inside Mounting Legs 73mm, Pivot Hole Diameter 12, Pulley Outside Diameter 81.5mm, Regulator Type Internal, Suits Unit Make Mahle, Alternator Mount Twin Leg, New / Reman. New.

Additional published details for cross-checking include Pulleys with belt pulley, Mounting Bores Distance 62.5, Number of belts 1, Packaging length 24.8, Packaging height 17.50, Product Group 2 ALTERNATORS, Part No. MG369, Brand MAHLE, Description Mahle Alternator 24V 35A.

Mahle Alternator 24V 35A. Part number MG369 should be checked first. Listed voltage is 24. Listed output rating is 35. These details form the core reference points used by parts interpreters when confirming the correct replacement.

Mount style is Twin Leg. Regulator type is Internal. Pulley configuration is A. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.

For part number MG369, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

Compatibility note: Confirm compatibility by matching part number MG369, 24V system requirements, 35A output, twin leg mount details, pulley arrangement and connector style against the existing alternator and vehicle application before purchase.

FAQ

What is the part number for this alternator?

The part number is MG369.

What voltage and output does it have?

It is a 24V alternator with a 35A power rating and a 35A alternator charge current.

Is this a new or remanufactured unit?

It is listed as new.

What type of regulator does it use?

It uses an internal regulator.

Does it come with a pulley?

Yes. It is listed as with belt pulley, with a pulley outside diameter of 81.5mm and pulley section A.

What should I check before ordering?

Check the part number MG369, voltage, 35A output, twin leg mounting dimensions, pulley details, connector / clamp W and the listed vehicle application before buying.