Denso Alternator 12V 130A 101211-8060

The Denso alternator listed here is a new 12V, 130A unit with part number 101211-8060. It is supplied as an each item, weighs 10.7kg, and uses an internal regulator with a brushless design and warning light terminal included.

Key mounting and dimensional details include a twin leg alternator mount, 101mm inside mounting legs, 198mm mount centre to centre, a 13mm pivot hole diameter, and a 1/2 UNC adjusting hole diameter. The shaft diameter is 22mm, which is also shown as 22mm in the shaft dimension listing.

This is a Denso unit intended for applications that match the listed specifications and mounting pattern. Because alternators are commonly swapped between similar-looking units, the part number 101211-8060, voltage, amperage, mount style, and shaft measurements should all be checked before ordering.

Key Features

• New alternator, not remanufactured
• 12V output with 130A power rating
• Internal regulator
• Brushless design
• Warning light terminal included
• Twin leg alternator mount

Specifications

• Brand: Denso
• Part No.: 101211-8060
• Product type: Alternator
• Voltage: 12V
• Power rating: 130A
• New / Reman.: New
• Regulator type: Internal
• Suits unit make: Denso

Verified fitment references

• Caterpillar 3160
• Caterpillar 3406
• Caterpillar 3408
• Caterpillar C10
• Challenger MT
• Champion 710A
• Champion 720A Series
• Ford 900-Series

Application and Buying Notes

Before ordering, compare the part number 101211-8060 with the unit being replaced, then check the 12V system requirement and 130A output rating. Those three points are the quickest way to narrow out mismatches, especially where the alternator body or pulley arrangement may look similar but the mounting and electrical details differ.

The mounting dimensions matter just as much as the electrical rating. This alternator uses a twin leg mount, 101mm inside mounting legs, 198mm centre to centre, a 13mm pivot hole, and a 1/2 UNC adjusting hole. If any of those dimensions do not line up with the vehicle or equipment bracket, the alternator may not install correctly even if the connector appears close.

The shaft is listed at 22mm, and the unit includes a warning light terminal. If your original alternator uses a different shaft size or warning lamp arrangement, confirm those details before purchase. The unit is new, brushless, and carries a one year warranty, but it still needs to be matched to the application correctly to avoid unnecessary downtime.

Fitment references are provided for several Caterpillar, Challenger, Champion, and Ford applications, but the safest approach is to confirm the exact application against your existing part and mounting measurements. If you are working from an old alternator with a worn label, the physical dimensions and part number are the most reliable checks.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number 101211-8060 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type ALTERNATOR, Unit of Measure EACH, Warranty One Year, Inside Mounting Legs 101mm, Power Rating (Amp) 130, Shaft Diameter 22mm, Voltage 12, Alternator Mount Twin Leg, New / Reman. New, Weight 10.7kg.

Additional published details for cross-checking include Product Group 1 ROTATING ELECTRICAL, Part No. 101211-8060, Brand DENSO, Description Denso Alternator 12V 130A, Adjusting Hole Diameter 1/2 UNC, Pivot Hole Diameter 13, Regulator Type Internal, Suits Unit Make Denso, Note Brushless. Includes warning light terminal, Mount Cnt to Cnt 198mm.

Denso Alternator 12V 130A. Part number 101211-8060 should be checked first. Listed voltage is 12. Listed output rating is 130. These details form the core reference points used by parts interpreters when confirming the correct replacement.

Mount style is Twin Leg. Regulator type is Internal. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.

For part number 101211-8060, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a alternator in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 and output 130 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Compatibility note: Confirm compatibility by matching part number 101211-8060, 12V voltage, 130A output, twin leg mounting, and the listed shaft and hole dimensions against the vehicle or equipment application before purchase.

FAQ

Is this alternator new or remanufactured?

It is listed as new, not remanufactured. For this listing, part number 101211-8060 is the main reference point. Listed voltage is 12. Listed output rating is 130. Published fitment references include CATERPILLAR 3160, CATERPILLAR 3160 1968, CATERPILLAR 3160 1969. These details should still be checked against the original unit before ordering.

What is the voltage and output rating?

The alternator is 12V with a 130A power rating. For this listing, part number 101211-8060 is the main reference point. Listed voltage is 12. Listed output rating is 130. Published fitment references include CATERPILLAR 3160, CATERPILLAR 3160 1968, CATERPILLAR 3160 1969. These details should still be checked against the original unit before ordering.

Does it have an internal regulator?

Yes. The regulator type is listed as internal. For this listing, part number 101211-8060 is the main reference point. Listed voltage is 12. Listed output rating is 130. Published fitment references include CATERPILLAR 3160, CATERPILLAR 3160 1968, CATERPILLAR 3160 1969. These details should still be checked against the original unit before ordering.

What mounting style does it use?

It uses a twin leg alternator mount, with 101mm inside mounting legs and 198mm mount centre to centre. For this listing, part number 101211-8060 is the main reference point. Listed voltage is 12. Listed output rating is 130. Published fitment references include CATERPILLAR 3160, CATERPILLAR 3160 1968, CATERPILLAR 3160 1969. These details should still be checked against the original unit before ordering.

What part number should I match?

The listed part number is 101211-8060. For this listing, part number 101211-8060 is the main reference point. Listed voltage is 12. Listed output rating is 130. Published fitment references include CATERPILLAR 3160, CATERPILLAR 3160 1968, CATERPILLAR 3160 1969. These details should still be checked against the original unit before ordering.

Which applications are referenced for fitment?

Verified fitment references include Caterpillar 3160, Caterpillar 3406, Caterpillar 3408, Caterpillar C10, Challenger MT, Champion 710A, Champion 720A Series, and Ford 900-Series. Always confirm the exact application and dimensions before ordering. For this listing, part number 101211-8060 is the main reference point. Listed voltage is 12. Listed output rating is 130. Published fitment references include CATERPILLAR 3160, CATERPILLAR 3160 1968, CATERPILLAR 3160 1969. These details should still be checked against the original unit before ordering.