Genuine Products Alternator 12V 130A Mitsubishi – Part No. JB3Z10346B

The Genuine Products alternator listed here is a 12V, 130A unit with part number JB3Z10346B. It is supplied as a new alternator, sold each, and is identified with pin code IR201, a 6 groove pulley, and clockwise rotation.

This alternator uses an internal regulator and an alternator mount described as quad leg, with 139mm mount centre to centre and 46mm between the inside mounting legs. The pulley outside diameter is 55mm, and the unit is noted as having an insulated return of no.

The product is described as suiting Mitsubishi applications. Because alternators are matched by electrical output, mounting pattern, pulley style, rotation, and connector code, those details should be checked carefully against the vehicle and the removed unit before purchase.

A one year warranty is listed for this alternator. The unit weight is 6.9kg, which can be useful when comparing to an existing part during identification and fitment checking.

Key Features

• New alternator, sold each
• 12V, 130A output
• Internal regulator
• 6 groove pulley
• Clockwise rotation
• Pin code IR201

Specifications

• Brand: Genuine Products
• Product type: Alternator
• Unit of measure: Each
• Voltage: 12V
• Power rating: 130A
• Part No.: JB3Z10346B
• Suits unit make: Mitsubishi
• Regulator type: Internal

Fitment guidance

• FORD: EVEREST, EVEREST 2018, EVEREST 2019, EVEREST 2020, EVEREST 2021, plus other listed applications

Application and Buying Notes

When comparing this alternator to the vehicle, start with the hard identifiers: part number JB3Z10346B, pin code IR201, 12V voltage, 130A output, and the quad leg mounting pattern. These are the details most likely to separate a correct match from a part that looks similar but will not install correctly.

The pulley and mounting measurements matter just as much as the electrical rating. This unit has a 55mm pulley outside diameter, a 6 groove pulley section, 139mm mount centre to centre, and 46mm between the inside mounting legs. If any of those differ from the existing alternator, the part may not align or drive correctly.

Rotation and regulator type also need to match the vehicle’s requirements. This alternator is clockwise rotating and uses an internal regulator, so it should only be considered where those specifications align with the application and the removed unit.

The listed suit note is Mitsubishi, but that alone is not enough to confirm fitment on every vehicle. Always verify the exact application by matching the part number, connector/pin code, pulley configuration, mounting style, and overall unit layout before ordering. The 6.9kg weight can also help when comparing against the original unit during identification.

If you are replacing an alternator on a Ford-badged vehicle or any other application, do not rely on model name alone. Alternator fitment is often determined by charging output, bracket arrangement, pulley count, and regulator setup, so a close visual match is not sufficient on its own.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number JB3Z10346B helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type ALTERNATOR, Unit of Measure EACH, Warranty One Year, Pin Code IR201, Pulley Outside Diameter 55mm, Regulator Type Internal, Suits Unit Make Mitsubishi, Alternator Mount Quad Leg, Mount Cnt to Cnt 139mm, Insulated Return No.

Additional published details for cross-checking include Product Group 2 ALTERNATORS, Part No. JB3Z10346B, Brand GENUINE PRODUCTS, Description Genuine Alternator 12V 130A Mitsubishi, Inside Mounting Legs 46mm, Power Rating (Amp) 130, Pulley Section 6 Groove, Rotation CW, Voltage 12.

Genuine Alternator 12V 130A Mitsubishi. Part number JB3Z10346B should be checked first. Listed voltage is 12. Listed output rating is 130. These details form the core reference points used by parts interpreters when confirming the correct replacement.

Mount style is Quad Leg. Regulator type is Internal. Pulley configuration is 6 Groove. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.

For part number JB3Z10346B, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

Compatibility note: Confirm fitment by matching part number JB3Z10346B, pin code IR201, 12V 130A output, quad leg mounting, 6 groove pulley, clockwise rotation, and the listed dimensions against the original alternator and vehicle application details before buying.

FAQ

Is this alternator new or remanufactured?

It is listed as new. For this listing, part number JB3Z10346B is the main reference point. Listed voltage is 12. Listed output rating is 130. Published fitment references include FORD EVEREST, FORD EVEREST 2018, FORD EVEREST 2019. These details should still be checked against the original unit before ordering.

What is the output of this alternator?

The alternator is rated at 12V and 130A. For this listing, part number JB3Z10346B is the main reference point. Listed voltage is 12. Listed output rating is 130. Published fitment references include FORD EVEREST, FORD EVEREST 2018, FORD EVEREST 2019. These details should still be checked against the original unit before ordering.

What part number should I match before ordering?

The listed part number is JB3Z10346B. For this listing, part number JB3Z10346B is the main reference point. Listed voltage is 12. Listed output rating is 130. Published fitment references include FORD EVEREST, FORD EVEREST 2018, FORD EVEREST 2019. These details should still be checked against the original unit before ordering.

What type of regulator does it use?

It uses an internal regulator. For this listing, part number JB3Z10346B is the main reference point. Listed voltage is 12. Listed output rating is 130. Published fitment references include FORD EVEREST, FORD EVEREST 2018, FORD EVEREST 2019. These details should still be checked against the original unit before ordering.

What pulley details are listed?

The alternator has a 6 groove pulley and a pulley outside diameter of 55mm. For this listing, part number JB3Z10346B is the main reference point. Listed voltage is 12. Listed output rating is 130. Published fitment references include FORD EVEREST, FORD EVEREST 2018, FORD EVEREST 2019. These details should still be checked against the original unit before ordering.

How should I confirm compatibility?

Match the part number, pin code IR201, 12V 130A rating, clockwise rotation, quad leg mount, and the listed mounting measurements against the removed unit and vehicle application before ordering. For this listing, part number JB3Z10346B is the main reference point. Listed voltage is 12. Listed output rating is 130. Published fitment references include FORD EVEREST, FORD EVEREST 2018, FORD EVEREST 2019. These details should still be checked against the original unit before ordering.