OEX Engine Shut Down Solenoid 24V 1504 Series ACX3331

The OEX Engine Shut Down Solenoid is a 24V unit in the 1504 Series, identified by part number ACX3331. It is supplied as a single each item and is listed under the OEX range for auto electrical accessories and fuses, breakers, relays and switches.

This solenoid uses a 2 bolt mounting arrangement and is specified with a pull current of 22A and a hold current of 0.37A. The listed pull rating is 5.4kgf, with a hold rating of 8.6kgf, and the stated weight is 0.78kg.

For buyers replacing an existing engine shut down solenoid, the important checks are voltage, mounting style, electrical demand, and the part number. This unit is a 24V solenoid, so it is intended for systems that match that electrical requirement, and the ACX3331 identifier should be confirmed against the vehicle or equipment application before ordering.

Key Features

• 24V engine shut down solenoid
• Part number ACX3331
• 1504 Series
• 2 bolt mounting
• Pull current: 22A
• Hold current: 0.37A

Specifications

• Brand: OEX
• Product type: Engine Shut Down Solenoid
• Unit of measure: Each
• Voltage: 24
• Part No.: ACX3331
• Weight: 0.78kg
• Warranty: One year
• Pull current: 22A

Application and Buying Notes

When comparing this solenoid to the part being replaced, start with the 24V rating and the ACX3331 part number. Those two details are the most useful identifiers here, especially where the original unit is mounted in a specific control or shut down system. If the voltage does not match, or the application calls for a different mounting setup, the part should not be assumed to fit.

The electrical figures are also important. A pull current of 22A means the control circuit must be suitable for the initial load at activation, while the 0.37A hold current shows the lower current demand once the solenoid is energised. That difference matters when checking wiring, relays, and circuit capacity in the existing system.

Physical installation also needs checking before purchase. This unit is listed with 2 bolt mounting, a pull rating of 5.4kgf, a hold rating of 8.6kgf, and a weight of 0.78kg. Those values help with direct comparison, but they do not replace a physical inspection of the mounting points, actuator travel, and the way the original shut down mechanism is arranged.

If you are replacing a failed solenoid, match the existing part number where possible and confirm the equipment uses a 24V electrical system. That approach is the safest way to avoid an incorrect purchase when the same general product type is used across different applications or machine builds.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number ACX3331 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type ENGINE SHUT DOWN SOLENOID, Unit of Measure EACH, Warranty One Year, Hold Current 0.37A, Pull Current 22A, Type (Accessory / Solenoids) Solenoid, Product Group 2 FUSES BREAKERS RELAYS SWITCHES, Part No. ACX3331, Brand OEX.

Additional published details for cross-checking include Description OEX Engine Shut Down Solenoid 24V - Pull Rating 5.4Kg/cm2 1504 Series, Voltage 24, Hold Rating 8.6kgf, Pull Rating 5.4kgf, Weight .78kg, Product Group 1 AUTO ELEC ACCESSORIES.

OEX Engine Shut Down Solenoid 24V - Pull Rating 5.4Kg/cm2 1504 Series. Part number ACX3331 should be checked first. Listed voltage is 24. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number ACX3331, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a engine shut down solenoid in workshop, fleet, trade, agricultural, or construction service, the listed voltage 24 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Where no verified application list is available, the part number, mounting details, connector style, and published specifications should be used as the primary selection criteria.

Compatibility note: Confirm compatibility by checking the 24V rating, ACX3331 part number, 1504 Series reference, and 2 bolt mounting arrangement against the existing unit before ordering.

FAQ

What is the voltage of this OEX shut down solenoid?

It is a 24V solenoid. For this listing, part number ACX3331 is the main reference point. Listed voltage is 24. These details should still be checked against the original unit before ordering.

What is the part number?

The listed part number is ACX3331. For this listing, part number ACX3331 is the main reference point. Listed voltage is 24. These details should still be checked against the original unit before ordering.

What mounting style does it use?

It uses a 2 bolt mounting arrangement. For this listing, part number ACX3331 is the main reference point. Listed voltage is 24. These details should still be checked against the original unit before ordering.

What are the current figures?

The pull current is 22A and the hold current is 0.37A. For this listing, part number ACX3331 is the main reference point. Listed voltage is 24. These details should still be checked against the original unit before ordering.

What are the pull and hold ratings?

The pull rating is 5.4kgf and the hold rating is 8.6kgf. The feature list also states 53N pull and 85N hold values. For this listing, part number ACX3331 is the main reference point. Listed voltage is 24. These details should still be checked against the original unit before ordering.

Is there a warranty listed?

Yes, the listed warranty is one year. For this listing, part number ACX3331 is the main reference point. Listed voltage is 24. These details should still be checked against the original unit before ordering.