OEX Engine Shut Down Solenoid 12V 2370 Series ACX3336

The OEX Engine Shut Down Solenoid is a 12V solenoid supplied as each unit, with part number ACX3336 and a stated 2370 Series identification. It is listed with a pull rating of 16.8kgf and a plunger travel of 38.1mm, which are the key figures to check when matching the unit to a shutdown application.

This solenoid is specified with a 4-bolt mounting pattern, a pull current of 58A, and a hold current of 1.7A. Those numbers matter when you are checking both the electrical load on the circuit and whether the mounting arrangement matches the equipment already in place.

The holding figures are also clearly stated: hold rating 39.9kgf, hold rating 391 Newtons, and a hold current of 1.7A. The unit weight is 2.46kg, and the warranty is one year, which gives a clear set of reference points for a parts replacement decision.

For buyers replacing an existing engine shut down solenoid, the safest approach is to compare the part number ACX3336, the 12V operating requirement, the 38.1mm plunger travel, and the 4-bolt fitment layout before ordering. If those points line up with the existing unit or application, the solenoid is at least being assessed on the right technical basis.

Key Features

• 12V engine shut down solenoid
• Part number ACX3336
• 2370 Series identification
• 4-bolt mounting
• Plunger travel: 38.1mm
• Pull current: 58A

Specifications

• Brand: OEX
• Product type: Engine shut down solenoid
• Item type: Solenoid
• Unit of measure: Each
• Voltage: 12V
• Part No.: ACX3336
• Plunger travel: 38.1mm
• Pull current: 58A

Application and Buying Notes

When replacing a shutdown solenoid, start with the part number ACX3336 and the 12V rating. Those are the most direct identifiers in the listing, and they should be matched against the original unit or equipment specification before anything else is assumed.

The mechanical details are just as important as the electrical ones. This unit has 4-bolt mounting and 38.1mm plunger travel, so both the bolt pattern and the movement range need to suit the application. A solenoid can be electrically correct but still be unsuitable if the mount style or travel does not line up.

The current figures are substantial, with a 58A pull current and 1.7A hold current. That means the wiring, control circuit, and supply capacity should be checked carefully against the existing setup. If the circuit was designed for a different solenoid load, the replacement may need to be assessed by a qualified technician before installation.

Because this is a shutdown solenoid, correct operation depends on the application matching the electrical and mechanical specifications. The safest buying method is to confirm the original part number, voltage, plunger travel, and mounting arrangement first, then compare the current draw and rated force before you place the order.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number ACX3336 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type ENGINE SHUT DOWN SOLENOID, Unit of Measure EACH, Warranty One Year, Plunger Travel 38.1mm, Hold Rating 39.9kgf, Pull Current 58A, Type (Accessory / Solenoids) Solenoid, Product Group 2 FUSES BREAKERS RELAYS SWITCHES, Part No. ACX3336.

Additional published details for cross-checking include Brand OEX, Description OEX Engine Shut Down Solenoid 12V - Pull Rating 16.8Kg/cm2 2370 Series, Voltage 12, Hold Current 1.7A, Item Type Solenoid, Pull Rating 16.8kgf, Weight 2.46kg, Product Group 1 AUTO ELEC ACCESSORIES.

OEX Engine Shut Down Solenoid 12V - Pull Rating 16.8Kg/cm2 2370 Series. Part number ACX3336 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number ACX3336, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a engine shut down solenoid in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Where no verified application list is available, the part number, mounting details, connector style, and published specifications should be used as the primary selection criteria.

Compatibility note: Confirm compatibility by matching part number ACX3336, 12V operation, 4-bolt mounting, and 38.1mm plunger travel with the existing unit or application before purchase.

FAQ

What is the part number for this OEX solenoid?

The part number listed is ACX3336. For this listing, part number ACX3336 is the main reference point. Listed voltage is 12. These details should still be checked against the original unit before ordering.

What voltage does this engine shut down solenoid use?

It is specified as a 12V solenoid. For this listing, part number ACX3336 is the main reference point. Listed voltage is 12. These details should still be checked against the original unit before ordering.

What mounting style is listed?

The listed mounting style is 4-bolt mounting. For this listing, part number ACX3336 is the main reference point. Listed voltage is 12. These details should still be checked against the original unit before ordering.

What is the plunger travel?

The listed plunger travel is 38.1mm. For this listing, part number ACX3336 is the main reference point. Listed voltage is 12. These details should still be checked against the original unit before ordering.

What are the current ratings?

The pull current is 58A and the hold current is 1.7A. For this listing, part number ACX3336 is the main reference point. Listed voltage is 12. These details should still be checked against the original unit before ordering.

Is there a warranty listed?

Yes. The warranty listed is one year. For this listing, part number ACX3336 is the main reference point. Listed voltage is 12. These details should still be checked against the original unit before ordering.