Revolution Glass Fuse 3AG 10A 5 Pack Part No. 63-50100BLR

The Revolution Glass Fuse 3AG 10A 5 Pack is a small-format automotive electrical fuse pack supplied as 5 fuses per pack. It is identified by part number 63-50100BLR and uses the 3AG fuse type, with each fuse listed at 10A.

Each fuse measures 32mm in length and 6mm in diameter, which is useful when checking physical size before purchase. The pack is described as a pack unit, and the overall weight is listed at .01kg.

This is a straightforward electrical service item for vehicles and related 12V-style accessory circuits where a 3AG glass fuse is specified. The amperage rating and fuse form must match the circuit requirement, so it is worth confirming both the 10A rating and the fuse dimensions before ordering.

Key Features

• 3AG glass fuse type
• 10A amperage rating
• Pack of 5 fuses
• Part No. 63-50100BLR
• 32mm long
• 6mm diameter

Specifications

• Type: Fuse
• Unit of measure: Pack
• Amps: 10A
• Fuse type: 3AG
• Pack qty: 5
• Length: 32mm
• Diameter: 6mm
• Weight: .01kg

Application and Buying Notes

Before buying, confirm that your application calls for a 3AG glass fuse and that the circuit requires a 10A fuse. The two key checks are the fuse type and the amperage rating, because a fuse of the wrong size or rating will not suit the holder or the circuit it is protecting.

The listed dimensions are 32mm in length and 6mm in diameter, so the fuse holder should be checked for those physical measurements. If you are replacing an existing fuse, matching the removed fuse to the same 3AG format and 10A rating is the safest comparison point.

The pack quantity is 5, which is useful for stocking spares or for circuits where you prefer to keep matched replacements on hand. For workshop, fleet, or general vehicle electrical maintenance, having the part number 63-50100BLR recorded can make repeat ordering easier and helps reduce mistakes when comparing similar glass fuses.

This item carries a one year warranty, which is relevant to the purchase decision, but the main compatibility check remains the fuse specification itself. As with any electrical fuse, the correct fit depends on the holder design and the circuit requirement, so do not rely on appearance alone when selecting a replacement.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number 63-50100BLR helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type FUSE, Unit of Measure PACK, Warranty One Year, Amps 10A, Fuse Type 3AG, Weight .01kg, Product Group 2 FUSES BREAKERS RELAYS SWITCHES, Part No. 63-50100BLR, Brand REVOLUTION, Description Revolution Glass Fuse 3AG 10A 5Pk.

Additional published details for cross-checking include Length 32mm, Diameter 6mm, Pack Qty 5, Product Group 1 AUTO ELEC ACCESSORIES.

Revolution Glass Fuse 3AG 10A 5Pk. Part number 63-50100BLR should be checked first. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number 63-50100BLR, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a fuse in workshop, fleet, trade, agricultural, or construction service, the listed electrical specification should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Where no verified application list is available, the part number, mounting details, connector style, and published specifications should be used as the primary selection criteria.

In the absence of a verified fitment list, the safest approach is to compare the removed unit directly with the listed product details. That includes checking the housing style, pulley layout, regulator arrangement, and any visible identification numbers before supply is approved.

The listed warranty is One Year. Warranty terms should be considered alongside correct application and part identification, as warranty does not replace fitment confirmation.

Compatibility note: Confirm compatibility by matching the part number 63-50100BLR, the 3AG fuse type, and the 10A rating with the fuse being replaced or the holder specification. If the physical size matters in your application, also verify the 32mm length and 6mm diameter before purchase.

FAQ

What type of fuse is this?

It is a 3AG glass fuse. For this listing, part number 63-50100BLR is the main reference point. These details should still be checked against the original unit before ordering. For this listing, part number 63-50100BLR is the main reference point. These details should still be checked against the original unit before ordering.

What is the amperage rating?

Each fuse in the pack is rated at 10A. For this listing, part number 63-50100BLR is the main reference point. These details should still be checked against the original unit before ordering. For this listing, part number 63-50100BLR is the main reference point. These details should still be checked against the original unit before ordering.

How many fuses are included?

The pack quantity is 5. For this listing, part number 63-50100BLR is the main reference point. These details should still be checked against the original unit before ordering. For this listing, part number 63-50100BLR is the main reference point. These details should still be checked against the original unit before ordering.

What are the size measurements?

Each fuse is listed at 32mm long and 6mm in diameter. For this listing, part number 63-50100BLR is the main reference point. These details should still be checked against the original unit before ordering. For this listing, part number 63-50100BLR is the main reference point. These details should still be checked against the original unit before ordering.

What is the part number?

The part number is 63-50100BLR. For this listing, part number 63-50100BLR is the main reference point. These details should still be checked against the original unit before ordering. For this listing, part number 63-50100BLR is the main reference point. These details should still be checked against the original unit before ordering.

Is there a warranty?

Yes. The warranty listed is one year. For this listing, part number 63-50100BLR is the main reference point. These details should still be checked against the original unit before ordering. For this listing, part number 63-50100BLR is the main reference point. These details should still be checked against the original unit before ordering.