Hella Flasher Relay 12V Electronic 42W Max 3 Terminal Part No. 3016LED1

The Hella Flasher Relay is a 12V electronic flasher unit rated to 42W max and fitted with 3 terminals. It is identified by Part No. 3016LED1 and is supplied as a single each unit for auto electrical use.

As an electronic flasher unit, it suits buyers who need a 12V relay-style replacement with the listed 42W maximum rating and 3-terminal configuration. The key details to check before ordering are the 12V system voltage, 3 terminals, and the part number 3016LED1.

Key Features

• 12V electronic flasher relay
• 42W maximum rating
• 3 terminals
• Part No. 3016LED1
• Designed for Duraled rear direction indicator lamps
• Maintains ADR specified globe failure warning signal function

Specifications

• Brand: Hella
• Type: Flasher Unit
• Flasher type: Electronic
• Voltage: 12
• Watts: 42W max
• Number of terminals: 3
• Part No.: 3016LED1
• Unit of measure: Each

Application and Buying Notes

Before ordering, confirm the vehicle system is 12V and that the existing flasher unit uses 3 terminals. The most reliable matching points here are the part number 3016LED1, the electronic flasher type, and the 42W maximum rating.

This relay is described for Duraled rear direction indicator lamps on prime movers, trucks and motor homes. That means it is aimed at a specific electrical application rather than a broad universal fit, so the existing setup should be checked carefully against the listed terminal count and voltage.

If you are replacing an older flasher unit, compare the physical connection layout and the current part identification before fitting. Electrical parts can look similar while still differing in terminal arrangement, rating, or intended indicator function.

The 42W max rating is a useful checkpoint when matching the relay to the vehicle’s indicator circuit. If the current system specification differs, do not assume compatibility based on appearance alone. The safest match is the listed application plus the 3016LED1 part number.

For workshop or fleet use, the three-year warranty provides a practical service reference, but it does not replace a proper fit check. Confirm the application, terminal count, and voltage first, then order with confidence that the relay matches the stated electrical details.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number 3016LED1 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type FLASHER UNIT, Unit of Measure EACH, Warranty Three Years, Number of Terminals 3, Flasher Type Electronic, Product Group 1 AUTO ELEC ACCESSORIES, Part No. 3016LED1, Brand HELLA, Description Hella Flasher Relay 12V Electronic 42W (Max) - 3 Terminals, Watts 42W (Max).

Additional published details for cross-checking include Voltage 12, Product Group 2 FUSES BREAKERS RELAYS SWITCHES.

Hella Flasher Relay 12V Electronic 42W (Max) - 3 Terminals. Part number 3016LED1 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number 3016LED1, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a flasher unit in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Where no verified application list is available, the part number, mounting details, connector style, and published specifications should be used as the primary selection criteria.

In the absence of a verified fitment list, the safest approach is to compare the removed unit directly with the listed product details. That includes checking the housing style, pulley layout, regulator arrangement, and any visible identification numbers before supply is approved.

The listed warranty is Three Years. Warranty terms should be considered alongside correct application and part identification, as warranty does not replace fitment confirmation.

Compatibility note: Confirm compatibility using Part No. 3016LED1, 12V system voltage, 3 terminals, and the stated Duraled rear direction indicator application before purchase.

FAQ

What type of part is this?

It is a Hella electronic flasher unit for automotive electrical use. For this listing, part number 3016LED1 is the main reference point. Listed voltage is 12. These details should still be checked against the original unit before ordering. For this listing, part number 3016LED1 is the main reference point. Listed voltage is 12. These details should still be checked against the original unit before ordering.

What voltage does it suit?

The listed voltage is 12V. For this listing, part number 3016LED1 is the main reference point. Listed voltage is 12. These details should still be checked against the original unit before ordering. For this listing, part number 3016LED1 is the main reference point. Listed voltage is 12. These details should still be checked against the original unit before ordering.

How many terminals does it have?

It has 3 terminals. For this listing, part number 3016LED1 is the main reference point. Listed voltage is 12. These details should still be checked against the original unit before ordering. For this listing, part number 3016LED1 is the main reference point. Listed voltage is 12. These details should still be checked against the original unit before ordering.

What is the maximum wattage rating?

The maximum rating listed is 42W. For this listing, part number 3016LED1 is the main reference point. Listed voltage is 12. These details should still be checked against the original unit before ordering. For this listing, part number 3016LED1 is the main reference point. Listed voltage is 12. These details should still be checked against the original unit before ordering.

What is the part number?

The part number is 3016LED1. For this listing, part number 3016LED1 is the main reference point. Listed voltage is 12. These details should still be checked against the original unit before ordering. For this listing, part number 3016LED1 is the main reference point. Listed voltage is 12. These details should still be checked against the original unit before ordering.

What application is it described for?

It is specifically designed for Duraled rear direction indicator lamps on motor vehicles such as prime movers, trucks and motor homes, maintaining the mandatory ADR specified globe failure warning signal function. For this listing, part number 3016LED1 is the main reference point. Listed voltage is 12. These details should still be checked against the original unit before ordering.