OEX Alternator 12V 140A Delphi Style DXA601

The OEX Alternator DXA601 is a new 12V, 140A unit designed in Delphi style and listed with a 6 groove pulley. It suits Delphi applications and uses a twin leg alternator mount, with 58mm inside mounting legs and a 183mm mount centre to centre measurement.

This alternator is specified with an internal regulator, a 56mm pulley outside diameter, and a pivot hole diameter of 10mm. The adjusting hole diameter is M10x1.5, so matching the mounting and adjustment points to the vehicle is an important check before ordering.

OEX lists this unit as part number DXA601, with pin code IR212 and a weight of 6.5kg. It is a rotating electrical component supplied new, and the warranty is listed as 3yr Passenger / 1yr Commercial.

Key Features

• 12V alternator with 140A output
• Delphi style application
• Internal regulator
• 6 groove pulley
• Twin leg mount
• New unit

Specifications

• Voltage: 12V
• Power rating: 140A
• Part No.: DXA601
• Pin Code: IR212
• Regulator type: Internal
• Alternator mount: Twin leg
• Inside mounting legs: 58mm
• Mount centre to centre: 183mm

Fitment guidance

• Listed for Holden Cruze applications
• Fitment tokens include Holden Cruze 2009, 2010, 2011, 2012, 2013, 2014, 2015 and 2016

Application and Buying Notes

For this alternator, the safest match is to compare the part number DXA601, the Delphi style application, and the physical mounting measurements before purchase. The listed details include 58mm inside mounting legs, 183mm mount centre to centre, 10mm pivot hole diameter, and M10x1.5 adjusting hole diameter, all of which need to line up with the vehicle’s original unit and brackets.

The 140A output and 12V system voltage are the key electrical figures to confirm against the vehicle’s charging setup. If the original alternator differs in pulley section, pulley diameter, mount type, or regulator arrangement, the replacement may not be a direct swap even if the vehicle appears similar.

This unit uses a 6 groove pulley and an internal regulator, so the belt layout and charging control style need to be checked carefully. The listed weight is 6.5kg, which can also be useful when comparing the replacement to the removed alternator during identification.

Holden Cruze appears in the fitment information provided, but only as a guide. Before ordering, confirm the exact vehicle application, the alternator mounting style, and the part number on the existing unit if available. That is the most reliable way to reduce the chance of ordering the wrong rotating electrical part.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number DXA601 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type ALTERNATOR, Unit of Measure EACH, Warranty 3yr Passenger 1yr Commercial, Inside Mounting Legs 58mm, Pivot Hole Diameter 10, Pulley Outside Diameter 56mm, Regulator Type Internal, Voltage 12, Mount Cnt to Cnt 183mm, Weight 6.5kg.

Additional published details for cross-checking include Product Group 1 ROTATING ELECTRICAL, Part No. DXA601, Brand OEX, Description OEX Alternator 12V 140A Delphi Style, Adjusting Hole Diameter M10x1.5, Pin Code IR212, Power Rating (Amp) 140, Pulley Section 6 Groove, Suits Unit Make Delphi, Alternator Mount Twin Leg.

OEX Alternator 12V 140A Delphi Style. Part number DXA601 should be checked first. Listed voltage is 12. Listed output rating is 140. These details form the core reference points used by parts interpreters when confirming the correct replacement.

Mount style is Twin Leg. Regulator type is Internal. Pulley configuration is 6 Groove. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.

For part number DXA601, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a alternator in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 and output 140 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Compatibility note: Confirm compatibility using part number DXA601, the Delphi style application, and the listed mounting and pulley measurements before purchase. If the vehicle uses a different mount, pulley arrangement, or regulator type, do not assume it will fit.

FAQ

What is the part number for this alternator?

The listed part number is DXA601. For this listing, part number DXA601 is the main reference point. Listed voltage is 12. Listed output rating is 140. Published fitment references include HOLDEN CRUZE, HOLDEN CRUZE 2009, HOLDEN CRUZE 2010. These details should still be checked against the original unit before ordering.

What voltage and output does it have?

It is a 12V alternator with a 140A power rating. For this listing, part number DXA601 is the main reference point. Listed voltage is 12. Listed output rating is 140. Published fitment references include HOLDEN CRUZE, HOLDEN CRUZE 2009, HOLDEN CRUZE 2010. These details should still be checked against the original unit before ordering.

What type of regulator does it use?

It uses an internal regulator. For this listing, part number DXA601 is the main reference point. Listed voltage is 12. Listed output rating is 140. Published fitment references include HOLDEN CRUZE, HOLDEN CRUZE 2009, HOLDEN CRUZE 2010. These details should still be checked against the original unit before ordering.

What pulley and belt setup is listed?

It has a 56mm pulley outside diameter and a 6 groove pulley section. For this listing, part number DXA601 is the main reference point. Listed voltage is 12. Listed output rating is 140. Published fitment references include HOLDEN CRUZE, HOLDEN CRUZE 2009, HOLDEN CRUZE 2010. These details should still be checked against the original unit before ordering.

What mounting details are provided?

The alternator is listed as twin leg mount, with 58mm inside mounting legs, 183mm mount centre to centre, 10mm pivot hole diameter, and M10x1.5 adjusting hole diameter. For this listing, part number DXA601 is the main reference point. Listed voltage is 12. Listed output rating is 140. Published fitment references include HOLDEN CRUZE, HOLDEN CRUZE 2009, HOLDEN CRUZE 2010. These details should still be checked against the original unit before ordering.

What vehicles are mentioned in the fitment information?

Holden Cruze applications are mentioned, including sample listings for 2009 through 2016. Final fitment should still be confirmed against the part number and mounting details. For this listing, part number DXA601 is the main reference point. Listed voltage is 12. Listed output rating is 140. Published fitment references include HOLDEN CRUZE, HOLDEN CRUZE 2009, HOLDEN CRUZE 2010. These details should still be checked against the original unit before ordering.