OEX Alternator 12V 100A Bosch Style BXA069

The OEX Alternator BXA069 is a new 12V, 100A unit supplied as each, with an internal regulator and a Bosch-style mounting arrangement. Key physical points to check are the twin leg alternator mount, 56mm inside mounting legs, 10.5mm pivot hole diameter, 10.5mm adjusting hole diameter, and a 54mm outside pulley diameter.

It uses a 6 groove pulley and is listed with pin code IR212. The unit is identified as part number BXA069 and is intended for Bosch-style applications, so matching the mounting style, pulley setup, and electrical specification is important before ordering.

OEX positions this alternator range as a quality aftermarket option, with ISO9001 certified factories and a comprehensive warranty. For buyers replacing a worn charging unit, the verified details here are the 12V system voltage, 100A output, internal regulator, and the listed Bosch unit make compatibility markers.

Key Features

• New alternator, not remanufactured
• 12V charging system
• 100A output
• Internal regulator
• Bosch-style unit
• Twin leg alternator mount

Specifications

• Brand: OEX
• Product type: Alternator
• Voltage: 12V
• Output: 100A
• Condition: New
• Regulator type: Internal
• Alternator mount: Twin leg
• Inside mounting legs: 56mm

Verified application guidance

• Supported fitment includes Holden Trax applications from 2014 through 2020 in the supplied fitment data.
• Supported fitment also includes Opel Corsa applications, with model-year references shown for 2012 and 2013 in the supplied fitment data.
• Fitment is dependent on the exact alternator style, mounting layout, pulley configuration, and electrical specification matching the vehicle currently fitted.

Application and Buying Notes

Before ordering, compare the part number BXA069 with the alternator already fitted to the vehicle, then check the physical match points: twin leg mount, 56mm inside mounting legs, 10.5mm pivot hole, 10.5mm adjusting hole, and 54mm pulley diameter. These measurements are often the difference between a clean replacement and a unit that will not line up correctly.

The 12V, 100A specification is important because charging capacity needs to suit the vehicle’s electrical system. This unit has an internal regulator, so the regulator style must also line up with the vehicle’s requirements. If the original unit uses a different regulator arrangement or pulley section, the alternator may not be a direct fit.

A Bosch-style alternator can still vary across applications, so the safest approach is to verify the unit make reference, the pin code IR212, and the mounting and pulley details together. The fitment data provided includes Holden Trax and Opel Corsa references, but those applications still need to be checked against the exact vehicle configuration already in service.

OEX lists this alternator as a new unit with warranty cover of 3 years for passenger use and 1 year for commercial use. That warranty detail is useful, but it does not replace the need to confirm the part number and application before purchase, especially where charging systems are sensitive to pulley, mount, and regulator differences.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number BXA069 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type ALTERNATOR, Unit of Measure EACH, Warranty 3yr Passenger 1yr Commercial, Inside Mounting Legs 56mm, Pivot Hole Diameter 10.5, Pulley Outside Diameter 54mm, Regulator Type Internal, Voltage 12, New / Reman. New, Product Group 1 ROTATING ELECTRICAL.

Additional published details for cross-checking include Part No. BXA069, Brand OEX, Description OEX Alternator 12V 100A Bosch Style, Adjusting Hole Diameter 10.5, Pin Code IR212, Power Rating (Amp) 100, Pulley Section 6 Groove, Suits Unit Make Bosch, Alternator Mount Twin Leg.

OEX Alternator 12V 100A Bosch Style. Part number BXA069 should be checked first. Listed voltage is 12. Listed output rating is 100. These details form the core reference points used by parts interpreters when confirming the correct replacement.

Mount style is Twin Leg. Regulator type is Internal. Pulley configuration is 6 Groove. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.

For part number BXA069, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a alternator in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 and output 100 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Compatibility note: Confirm compatibility by matching part number BXA069, Bosch-style application details, 12V 100A output, twin leg mount, pulley size, and the exact vehicle fitment before ordering.

FAQ

What is the part number for this alternator?

The listed part number is BXA069. For this listing, part number BXA069 is the main reference point. Listed voltage is 12. Listed output rating is 100. Published fitment references include HOLDEN TRAX, HOLDEN TRAX 2014, HOLDEN TRAX 2015. These details should still be checked against the original unit before ordering.

Is this alternator new or remanufactured?

It is listed as new. For this listing, part number BXA069 is the main reference point. Listed voltage is 12. Listed output rating is 100. Published fitment references include HOLDEN TRAX, HOLDEN TRAX 2014, HOLDEN TRAX 2015. These details should still be checked against the original unit before ordering.

What voltage and output does it have?

It is a 12V alternator with a 100A power rating. For this listing, part number BXA069 is the main reference point. Listed voltage is 12. Listed output rating is 100. Published fitment references include HOLDEN TRAX, HOLDEN TRAX 2014, HOLDEN TRAX 2015. These details should still be checked against the original unit before ordering.

Does it have an internal regulator?

Yes. The regulator type is internal. For this listing, part number BXA069 is the main reference point. Listed voltage is 12. Listed output rating is 100. Published fitment references include HOLDEN TRAX, HOLDEN TRAX 2014, HOLDEN TRAX 2015. These details should still be checked against the original unit before ordering.

What pulley setup does it use?

It has a 6 groove pulley with a 54mm outside diameter. For this listing, part number BXA069 is the main reference point. Listed voltage is 12. Listed output rating is 100. Published fitment references include HOLDEN TRAX, HOLDEN TRAX 2014, HOLDEN TRAX 2015. These details should still be checked against the original unit before ordering.

What vehicle fitment is shown?

The supplied fitment data includes Holden Trax applications from 2014 to 2020 and Opel Corsa references, including 2012 and 2013 model-year listings. For this listing, part number BXA069 is the main reference point. Listed voltage is 12. Listed output rating is 100. Published fitment references include HOLDEN TRAX, HOLDEN TRAX 2014, HOLDEN TRAX 2015. These details should still be checked against the original unit before ordering.