OEX Alternator 12V 110A Valeo Style VXA907

The OEX Alternator VXA907 is a 12V, 110A unit built in a Valeo style, with a 6 groove pulley and internal regulator. It is a new alternator sold as each, weighing 5.4kg, and it suits units made by Valeo.

Key mounting details are provided for identification and comparison: inside mounting legs are 60mm, the mount centre to centre measurement is 127mm, and both the pivot hole diameter and adjusting hole diameter are M8x1.25 / 8. The alternator mount is quad leg, so matching the physical layout matters before ordering.

OEX positions this alternator range as an aftermarket option with a focus on quality and reliability, supported by ISO9001 certified factories and a warranty of 3 years for passenger use or 1 year for commercial use. That makes the part number, VXA907, the most reliable reference when checking whether it matches the vehicle or the existing unit.

Key Features

• 12V alternator with 110A power rating
• Valeo style unit
• Internal regulator
• 6 groove pulley
• Quad leg alternator mount
• New unit, sold each

Specifications

• Brand: OEX
• Product type: Alternator
• Unit of measure: Each
• Power rating: 110A
• Voltage: 12V
• Part no.: VXA907
• Pin code: IR203
• Suits unit make: Valeo

Confirmed fitment notes

• NISSAN PULSAR
• NISSAN PULSAR 2012
• NISSAN PULSAR 2013
• NISSAN PULSAR 2014
• NISSAN PULSAR 2015
• NISSAN PULSAR 2016
• NISSAN PULSAR 2017

Application and Buying Notes

Before ordering, compare the part number VXA907 and the application details against the alternator already fitted to the vehicle. The important match points here are the Valeo style design, 12V system, 110A output, internal regulator, and quad leg mounting arrangement with 60mm inside mounting legs.

The pulley and mounting dimensions are the practical checks that usually decide whether an alternator will physically suit the vehicle. This unit has a 50mm pulley outside diameter, a 6 groove pulley section, a 127mm mount centre to centre measurement, and M8x1.25 / 8 pivot and adjusting holes.

If you are replacing a failed alternator, it is worth comparing the old unit carefully rather than relying on appearance alone. Alternators can look similar while differing in mounting shape, pulley section, regulator type, or terminal details, and the pin code for this unit is IR203.

The listed fitment references include Nissan Pulsar applications across 2012 to 2017. Even with those references, the safest approach is to confirm the vehicle against the existing alternator, the part number, and the mounting measurements before purchase, especially where the vehicle has been modified or a previous repair has used a different charging unit.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number VXA907 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type ALTERNATOR, Unit of Measure EACH, Warranty 3yr Passenger 1yr Commercial, Inside Mounting Legs 60mm, Pivot Hole Diameter M8x1.25 / 8, Pulley Outside Diameter 50mm, Regulator Type Internal, Voltage 12, Mount Cnt to Cnt 127mm, Insulated Return No.

Additional published details for cross-checking include Product Group 2 ALTERNATORS, Part No. VXA907, Brand OEX, Description OEX Alternator 12V 110A Valeo Style, Adjusting Hole Diameter M8x1.25 / 8, Pin Code IR203, Power Rating (Amp) 110, Pulley Section 6 Groove, Suits Unit Make Valeo.

OEX Alternator 12V 110A Valeo Style. Part number VXA907 should be checked first. Listed voltage is 12. Listed output rating is 110. These details form the core reference points used by parts interpreters when confirming the correct replacement.

Mount style is Quad Leg. Regulator type is Internal. Pulley configuration is 6 Groove. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.

For part number VXA907, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a alternator in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 and output 110 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Compatibility note: Confirm fitment using the part number VXA907, the Valeo style application, and the stated mounting and pulley measurements before ordering. Where the existing alternator differs in mount layout, pulley section, regulator type, or dimensions, do not assume it will interchange.

FAQ

What is the part number for this alternator?

The part number is VXA907. For this listing, part number VXA907 is the main reference point. Listed voltage is 12. Listed output rating is 110. Published fitment references include NISSAN PULSAR, NISSAN PULSAR 2012, NISSAN PULSAR 2013. These details should still be checked against the original unit before ordering.

What voltage and output does this alternator have?

It is a 12V alternator with a 110A power rating. For this listing, part number VXA907 is the main reference point. Listed voltage is 12. Listed output rating is 110. Published fitment references include NISSAN PULSAR, NISSAN PULSAR 2012, NISSAN PULSAR 2013. These details should still be checked against the original unit before ordering.

Does this alternator have an internal regulator?

Yes. The regulator type is internal. For this listing, part number VXA907 is the main reference point. Listed voltage is 12. Listed output rating is 110. Published fitment references include NISSAN PULSAR, NISSAN PULSAR 2012, NISSAN PULSAR 2013. These details should still be checked against the original unit before ordering.

What pulley setup does it use?

It has a 6 groove pulley with a pulley outside diameter of 50mm. For this listing, part number VXA907 is the main reference point. Listed voltage is 12. Listed output rating is 110. Published fitment references include NISSAN PULSAR, NISSAN PULSAR 2012, NISSAN PULSAR 2013. These details should still be checked against the original unit before ordering.

What mounting measurements are listed?

The listed measurements are 60mm inside mounting legs, 127mm mount centre to centre, and M8x1.25 / 8 for both pivot and adjusting hole diameters. For this listing, part number VXA907 is the main reference point. Listed voltage is 12. Listed output rating is 110. Published fitment references include NISSAN PULSAR, NISSAN PULSAR 2012, NISSAN PULSAR 2013. These details should still be checked against the original unit before ordering.

Which vehicles are listed in the fitment notes?

The fitment notes list Nissan Pulsar applications, including 2012, 2013, 2014, 2015, 2016 and 2017 references. For this listing, part number VXA907 is the main reference point. Listed voltage is 12. Listed output rating is 110. Published fitment references include NISSAN PULSAR, NISSAN PULSAR 2012, NISSAN PULSAR 2013. These details should still be checked against the original unit before ordering.