OEX Alternator 12V 150A Mitsubishi Style MXA2098

The OEX Alternator MXA2098 is a new 12V, 150A alternator in Mitsubishi style, supplied as an each unit for rotating electrical applications. It carries a 7 groove pulley, clockwise rotation, and an internal regulator, so the electrical and mechanical details can be checked against the original unit before ordering.

This alternator is listed with a twin leg mount, 81mm inside mounting legs, 157mm mount centre to centre, and a 10.5mm / M10 x 1.25 pivot hole. The adjusting hole is M8 x 1.25, and the pulley outside diameter is 55mm, which are the main points to match when comparing against the vehicle’s existing setup.

OEX describes the range as one with a reputation for quality and reliability at aftermarket pricing, with major manufacturers under the brand typically acting as OEM suppliers. The unit is made in ISO9001 certified factories and is backed by a 3 year passenger / 1 year commercial warranty.

Key Features

• New alternator, not remanufactured
• 12V, 150A output
• Mitsubishi style unit
• Internal regulator
• 7 groove pulley
• Clockwise rotation

Specifications

• Brand: OEX
• Part No.: MXA2098
• Product type: Alternator
• Voltage: 12V
• Power rating: 150A
• New / remanufactured: New
• Rotation: CW
• Pulley section: 7 groove

Vehicle fitment notes

• Fitment information supplied for INFINITI and NISSAN applications including FX, M, Q70, QX70, Navara, Pathfinder, Patrol and Skyline Crossover.
• Sample applications listed include INFINITI FX 2010, 2011 and 2012, and NISSAN Navara 2011, 2012 and 2013.
• Fitment data is grouped broadly by make and model family, so the part number and mounting measurements should still be checked against the vehicle before purchase.

Application and Buying Notes

When checking the MXA2098 against a replacement unit, start with the part number, 12V charging system, and the 150A output rating. Those are the quickest identifiers, but the physical details matter just as much, especially the twin leg mount, 81mm inside mounting legs, and 157mm mount centre to centre.

The pulley and regulator details are also important. This alternator uses a 7 groove pulley with a 55mm outside diameter, clockwise rotation, and an internal regulator. If the existing alternator differs in pulley section, rotation, or regulator type, it should be compared carefully before fitting.

For a proper match, check the pivot hole diameter of 10.5mm / M10 x 1.25 and the adjusting hole of M8 x 1.25 against the original unit. The alternator is listed as 5.9kg and without insulated return, so those details may also be useful when confirming the correct application.

The supplied fitment references point to INFINITI and NISSAN models, including Navara, Pathfinder, Patrol, FX, M, Q70, QX70 and Skyline Crossover families. Even where a model family appears in the fitment listing, the safest approach is still to confirm the existing alternator style and mounting dimensions before ordering.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number MXA2098 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type ALTERNATOR, Unit of Measure EACH, Warranty 3yr Passenger 1yr Commercial, Inside Mounting Legs 81mm, Pivot Hole Diameter 10.5 / M10 x 1.25, Pulley Outside Diameter 55mm, Regulator Type Internal, Suits Unit Make Mitsubishi, Alternator Mount Twin Leg, Mount Cnt to Cnt 157mm.

Additional published details for cross-checking include Insulated Return No, Product Group 2 ALTERNATORS, Part No. MXA2098, Brand OEX, Description OEX Alternator 12V 150A Mitsubishi Style, Adjusting Hole Diameter M8 x 1.25, Pin Code IR203, Power Rating (Amp) 150, Pulley Section 7 Groove.

OEX Alternator 12V 150A Mitsubishi Style. Part number MXA2098 should be checked first. Listed voltage is 12. Listed output rating is 150. These details form the core reference points used by parts interpreters when confirming the correct replacement.

Mount style is Twin Leg. Regulator type is Internal. Pulley configuration is 7 Groove. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.

For part number MXA2098, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a alternator in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 and output 150 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include INFINITI FX, INFINITI FX 2010, INFINITI FX 2011, INFINITI FX 2012, NISSAN NAVARA, NISSAN NAVARA 2011. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

Compatibility note: Confirm compatibility by matching part number MXA2098, 12V/150A specification, Mitsubishi style casing, twin leg mount, pulley details, and the vehicle application details before purchase. Do not rely on model name alone.

FAQ

What type of alternator is this?

It is an OEX alternator, part number MXA2098, listed as a new 12V 150A Mitsubishi style unit with an internal regulator.

Is this alternator new or remanufactured?

It is listed as new.

What are the key mounting measurements?

The listed mounting details are twin leg mount, 81mm inside mounting legs, 157mm mount centre to centre, 10.5mm / M10 x 1.25 pivot hole, and M8 x 1.25 adjusting hole.

What pulley details are listed?

The alternator has a 7 groove pulley with a 55mm outside diameter and clockwise rotation.

Which vehicles are shown in the fitment data?

The fitment data includes INFINITI and NISSAN applications such as FX, M, Q70, QX70, Navara, Pathfinder, Patrol and Skyline Crossover families, with sample years including INFINITI FX 2010 to 2012 and NISSAN Navara 2011 to 2013.

What warranty is listed for this alternator?

The listed warranty is 3 year passenger and 1 year commercial.