OEX Alternator 12V 150A Valeo Style VXA059

The OEX Alternator VXA059 is a new 12V, 150A rotating electrical unit with an internal regulator and a 6 groove pulley. It is listed as Valeo style and suits a Valeo unit make, so checking the part number and mounting details is the safest way to confirm the right replacement before ordering.

This alternator uses a quad leg mount with 50mm inside mounting legs, a 165mm mount centre-to-centre measurement, and M10x1.25 / 10 pivot and adjusting holes. Those dimensions are the practical checks that matter when replacing a Valeo style alternator, especially where mounting style and pulley alignment need to match the original unit.

At 6.0kg, this is a substantial 12V alternator designed for modern charging system requirements where the correct amperage and physical fit are both important. The listed OEX part number is VXA059, and the pin code is IR182, which gives you another useful reference point when comparing against the removed unit or workshop parts catalogue.

Key Features

• New OEX alternator
• 12V system
• 150A output
• Valeo style unit
• Internal regulator
• 6 groove pulley

Specifications

• Brand: OEX
• Product type: Alternator
• Condition: New
• Voltage: 12
• Power rating: 150A
• Unit of measure: Each
• Warranty: 3yr Passenger / 1yr Commercial
• Pulley outside diameter: 55mm

Confirmed fitment references

• KIA Carnival
• KIA Carnival 2015
• KIA Carnival 2016
• KIA Carnival 2017
• KIA Carnival 2018
• KIA Carnival 2019
• KIA Carnival 2020

Application and Buying Notes

Before fitting, match the removed alternator against the key identifiers on this unit: VXA059, IR182, 12V, 150A, and the Valeo style specification. The most reliable checks are the mounting arrangement, the 50mm inside mounting legs, the 165mm mount centre-to-centre measurement, and the M10x1.25 / 10 pivot and adjusting holes.

The pulley details also need attention. This alternator has a 55mm outside diameter pulley with a 6 groove section, so the belt profile and pulley line-up should be checked carefully against the vehicle’s original assembly. If the existing belt, bracket, or tensioning arrangement differs from these details, the part should be verified before purchase or installation.

Because this is a new alternator with an internal regulator, it is important to confirm that the vehicle’s charging system is set up for that style of unit. The listed application preview includes KIA Carnival across 2015 to 2020, but the safest buying approach is still to confirm by part number, physical mount style, and pulley configuration rather than relying on the model name alone.

The 6.0kg unit weight can also be useful when comparing a replacement against the old part, especially if you are checking you have the correct housing and mount layout. If you are unsure, compare photos, dimensions, and electrical connector details with the vehicle’s original alternator before ordering.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number VXA059 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type ALTERNATOR, Unit of Measure EACH, Warranty 3yr Passenger 1yr Commercial, Inside Mounting Legs 50mm, Pivot Hole Diameter M10x1.25 / 10, Pulley Outside Diameter 55mm, Regulator Type Internal, Voltage 12, Mount Cnt to Cnt 165mm, Weight 6.0kg.

Additional published details for cross-checking include Product Group 1 ROTATING ELECTRICAL, Part No. VXA059, Brand OEX, Description OEX Alternator 12V 150A Valeo Style, Adjusting Hole Diameter M10x1.25 / 10, Pin Code IR182, Power Rating (Amp) 150, Pulley Section 6 Groove, Suits Unit Make Valeo, Alternator Mount Quad Leg.

OEX Alternator 12V 150A Valeo Style. Part number VXA059 should be checked first. Listed voltage is 12. Listed output rating is 150. These details form the core reference points used by parts interpreters when confirming the correct replacement.

Mount style is Quad Leg. Regulator type is Internal. Pulley configuration is 6 Groove. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.

For part number VXA059, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a alternator in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 and output 150 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Compatibility note: Confirm fitment by matching the part number VXA059, the Valeo style application, and the physical details including 12V, 150A, quad leg mount, 50mm inside mounting legs, 165mm mount centre-to-centre, and 6 groove pulley configuration before purchase.

FAQ

Is this alternator new or remanufactured?

It is listed as new. For this listing, part number VXA059 is the main reference point. Listed voltage is 12. Listed output rating is 150. Published fitment references include KIA CARNIVAL, KIA CARNIVAL 2015, KIA CARNIVAL 2016. These details should still be checked against the original unit before ordering.

What is the voltage and output rating?

This alternator is 12V with a 150A power rating. For this listing, part number VXA059 is the main reference point. Listed voltage is 12. Listed output rating is 150. Published fitment references include KIA CARNIVAL, KIA CARNIVAL 2015, KIA CARNIVAL 2016. These details should still be checked against the original unit before ordering.

What type of regulator does it use?

It uses an internal regulator. For this listing, part number VXA059 is the main reference point. Listed voltage is 12. Listed output rating is 150. Published fitment references include KIA CARNIVAL, KIA CARNIVAL 2015, KIA CARNIVAL 2016. These details should still be checked against the original unit before ordering.

What mounting style does it have?

It has a quad leg alternator mount, with 50mm inside mounting legs and 165mm mount centre-to-centre. For this listing, part number VXA059 is the main reference point. Listed voltage is 12. Listed output rating is 150. Published fitment references include KIA CARNIVAL, KIA CARNIVAL 2015, KIA CARNIVAL 2016. These details should still be checked against the original unit before ordering.

What pulley specification is listed?

The pulley is listed as 55mm outside diameter with a 6 groove section. For this listing, part number VXA059 is the main reference point. Listed voltage is 12. Listed output rating is 150. Published fitment references include KIA CARNIVAL, KIA CARNIVAL 2015, KIA CARNIVAL 2016. These details should still be checked against the original unit before ordering.

Which vehicles are shown in the fitment preview?

The fitment preview shows KIA Carnival, including 2015 through 2020 model years. For this listing, part number VXA059 is the main reference point. Listed voltage is 12. Listed output rating is 150. Published fitment references include KIA CARNIVAL, KIA CARNIVAL 2015, KIA CARNIVAL 2016. These details should still be checked against the original unit before ordering.