OEX Alternator 12V 105A Mitsubishi Style MXA2119

The OEX alternator MXA2119 is a new 12V unit with a 105A power rating and a Mitsubishi style, twin leg mount. It is supplied as each and carries a 6 groove pulley, with a pulley outside diameter of 57mm and a mount centre to centre measurement of 154mm.

This alternator uses an inside mounting leg width of 36mm, an adjusting hole diameter of 8mm, and a pivot hole diameter of M8x1.25 / 8. At 5.26kg, it is a rotating electrical component intended for applications that match these physical and electrical specifications.

The listed features include a dynamically balanced rotor, which is a useful detail when comparing replacement alternators by build and application. The part number is MXA2119, and the brand is OEX.

Warranty cover is listed as 3 years for passenger use and 1 year for commercial use. As with any alternator replacement, the fit should be checked against the vehicle’s existing unit and application details before purchase.

Key Features

• 12V alternator
• 105A output
• Mitsubishi style
• Twin leg mount
• 6 groove pulley
• Dynamically balanced rotor

Specifications

• Brand: OEX
• Part No.: MXA2119
• Voltage: 12V
• Amperage: 105A
• Mount type: Twin leg
• Inside mounting legs: 36mm
• Mount centre to centre: 154mm
• Adjusting hole diameter: 8mm

Fitment guidance

• HONDA: CITY, CITY 2009, CITY 2010, CITY 2011, CITY 2012, plus other listed applications

Application and Buying Notes

Before ordering, compare the part number MXA2119 and the physical mounting measurements against the alternator currently fitted to the vehicle. The key checkpoints here are the 12V system, 105A output, twin leg mount, 36mm inside mounting legs, and 154mm mount centre to centre.

Pulley and bracket details matter just as much as electrical output. This unit has a 6 groove pulley with a 57mm outside diameter, plus an 8mm adjusting hole and an M8x1.25 / 8 pivot hole. If any of those points differ from the original alternator, the unit may not suit the application without modification.

The fitment data supplied points to Honda City and Honda Jazz applications, but the exact match should still be confirmed against the vehicle build details and the existing alternator. Alternators can differ by engine, bracket style, pulley setup, and charging system requirements, even within the same model range.

For buyers replacing a worn unit, the weight of 5.26kg and the dynamically balanced rotor are useful comparison points, but they do not replace a physical match check. Confirm the old unit’s mounting style, connector arrangement, and pulley alignment before fitting, then compare them with the listed measurements and the MXA2119 part number.

Warranty cover is 3 years for passenger use and 1 year for commercial use. Keep in mind that warranty terms do not confirm compatibility; the deciding factors remain the application details, mount type, and measured dimensions listed for this OEX alternator.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number MXA2119 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type ALTERNATOR, Unit of Measure EACH, Warranty 3yr Passenger 1yr Commercial, Inside Mounting Legs 36mm, Power Rating (Amp) 105, Pulley Section 6 Groove, Voltage 12, Mount Cnt to Cnt 154mm, Weight 5.26kg, Product Group 1 ROTATING ELECTRICAL.

Additional published details for cross-checking include Part No. MXA2119, Brand OEX, Description OEX Alternator 12V 105A Mitsubishi Style, Adjusting Hole Diameter 8, Pivot Hole Diameter M8x1.25 / 8, Pulley Outside Diameter 57mm, Suits Unit Make Mitsubishi, Alternator Mount Twin Leg, New / Reman. New.

OEX Alternator 12V 105A Mitsubishi Style. Part number MXA2119 should be checked first. Listed voltage is 12. Listed output rating is 105. These details form the core reference points used by parts interpreters when confirming the correct replacement.

Mount style is Twin Leg. Pulley configuration is 6 Groove. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.

For part number MXA2119, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

Compatibility note: Confirm fitment by matching part number MXA2119, the 12V 105A specification, and the twin leg mounting dimensions before ordering. Where vehicle application details and the existing alternator do not align, do not assume interchangeability.

FAQ

What is the part number for this alternator?

The part number is MXA2119. For this listing, part number MXA2119 is the main reference point. Listed voltage is 12. Listed output rating is 105. Published fitment references include HONDA CITY, HONDA CITY 2009, HONDA CITY 2010. These details should still be checked against the original unit before ordering.

What voltage and output does this alternator have?

It is a 12V alternator rated at 105A. For this listing, part number MXA2119 is the main reference point. Listed voltage is 12. Listed output rating is 105. Published fitment references include HONDA CITY, HONDA CITY 2009, HONDA CITY 2010. These details should still be checked against the original unit before ordering.

What type of mount does it use?

It uses a twin leg alternator mount with 36mm inside mounting legs and 154mm mount centre to centre. For this listing, part number MXA2119 is the main reference point. Listed voltage is 12. Listed output rating is 105. Published fitment references include HONDA CITY, HONDA CITY 2009, HONDA CITY 2010. These details should still be checked against the original unit before ordering.

What pulley setup is listed?

It has a 6 groove pulley with a 57mm outside diameter. For this listing, part number MXA2119 is the main reference point. Listed voltage is 12. Listed output rating is 105. Published fitment references include HONDA CITY, HONDA CITY 2009, HONDA CITY 2010. These details should still be checked against the original unit before ordering.

Is this a new or remanufactured unit?

It is listed as new. For this listing, part number MXA2119 is the main reference point. Listed voltage is 12. Listed output rating is 105. Published fitment references include HONDA CITY, HONDA CITY 2009, HONDA CITY 2010. These details should still be checked against the original unit before ordering.

What warranty is listed?

Warranty is listed as 3 years for passenger use and 1 year for commercial use. For this listing, part number MXA2119 is the main reference point. Listed voltage is 12. Listed output rating is 105. Published fitment references include HONDA CITY, HONDA CITY 2009, HONDA CITY 2010. These details should still be checked against the original unit before ordering.