OEX Alternator 12V 110A ZXA102

The OEX Alternator 12V 110A, part number ZXA102, is a new passenger alternator with a 110 amp output and 12 volt system rating. It is listed as an OEM product and uses an internal regulator, which are important checkpoints when replacing a charging system component.

Mounting details matter with alternators, and this unit is specified as a twin leg mount with 60mm inside mounting legs, a 176mm mount centre-to-centre measurement, an M8x1.25 adjusting hole, and a 10mm pivot hole. Those dimensions should be matched carefully to the vehicle application before purchase.

The pulley setup is a 6 groove design with a 56mm outside diameter, and the alternator weighs 6.32kg. It carries a 3 year passenger warranty and 1 year commercial warranty, so it is aimed at a defined application rather than a one-size-fits-all replacement.

Key Features

• OEX OEM product
• New alternator
• 12V system
• 110A output
• Internal regulator
• Twin leg mount

Specifications

• Brand: OEX
• Product type: Alternator Passenger
• Voltage: 12V
• Power rating: 110A
• Part number: ZXA102
• Regulator type: Internal
• Mount: Twin leg
• Inside mounting legs: 60mm

Fitment Guidance

• HAVAL: H6, H6 2017, H6 2018, H6 2019, H6 2020, plus other listed applications

Application and Buying Notes

Confirm the part number ZXA102 against the vehicle listing, as alternators are commonly matched by mount style, pulley layout, electrical rating, and connector/regulator configuration as well as brand. A 12V, 110A alternator is not interchangeable with every other OEX unit just because it is a similar shape or size.

The supplied mounting measurements are the most useful checks here: 60mm inside mounting legs, 176mm centre-to-centre, M8x1.25 adjusting hole, and 10mm pivot hole. If any of those points differ from the removed unit or the vehicle specification, it should be treated as a mismatch until confirmed.

The 6 groove pulley and 56mm outside diameter are also important. Belt type and pulley alignment need to match the engine setup, otherwise the replacement may not run correctly even if the electrical rating appears suitable. Compare the old alternator carefully before fitting.

Because this unit is listed as new with an internal regulator, it is best suited to customers replacing a like-for-like alternator rather than adapting a different charging system arrangement. If the original unit uses a different regulator style or mounting pattern, verify compatibility before ordering.

The warranty is 3 years for passenger use and 1 year for commercial use, which is a practical buying detail for vehicles that see different duty cycles. Keep the invoice and confirm the intended use category at purchase so the warranty expectation is clear.

The listed fitment preview includes HAVAL H6 applications across 2017, 2018, 2019, 2020, and 2021, but fitment should still be confirmed against the exact vehicle and the removed alternator. Match the part number and physical details rather than relying on model name alone.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number ZXA102 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type ALTERNATOR PASSENGER, Unit of Measure EACH, Warranty 3yr Passenger 1yr Commercial, Inside Mounting Legs 60mm, Power Rating (Amp) 110, Pulley Section 6 Groove, Voltage 12, Mount Cnt to Cnt 176mm, Weight 6.32kg, Product Group 1 ROTATING ELECTRICAL.

Additional published details for cross-checking include Part No. ZXA102, Brand OEX, Description OEX Alternator 12V 110A, Adjusting Hole Diameter M8x1.25, Pivot Hole Diameter 10, Pulley Outside Diameter 56mm, Regulator Type Internal, Alternator Mount Twin Leg, New / Reman. New.

OEX Alternator 12V 110A. Part number ZXA102 should be checked first. Listed voltage is 12. Listed output rating is 110. These details form the core reference points used by parts interpreters when confirming the correct replacement.

Mount style is Twin Leg. Regulator type is Internal. Pulley configuration is 6 Groove. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.

For part number ZXA102, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a alternator passenger in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 and output 110 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include HAVAL H6, HAVAL H6 2017, HAVAL H6 2018, HAVAL H6 2019. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

The listed warranty is 3yr Passenger 1yr Commercial. Warranty terms should be considered alongside correct application and part identification, as warranty does not replace fitment confirmation.

Compatibility note: Please confirm compatibility using part number ZXA102, the 12V 110A specification, and the mounting and pulley dimensions before ordering. Vehicle application details should always be checked against the removed alternator and the vehicle’s exact build.

FAQ

What is the part number for this alternator?

The part number is ZXA102.

What voltage and output does it have?

It is a 12V alternator with a 110A power rating.

Is this alternator new or remanufactured?

It is listed as new.

What type of regulator does it use?

It uses an internal regulator.

What are the main mounting details?

It is a twin leg mount with 60mm inside mounting legs, 176mm mount centre-to-centre, an M8x1.25 adjusting hole, and a 10mm pivot hole.

What vehicles are shown in the fitment preview?

The fitment preview shows HAVAL H6 applications, including 2017, 2018, 2019, 2020, and 2021 models. Fitment should still be confirmed against the exact vehicle and part number before purchase.