OEX Alternator 12V 70A Mitsubishi Style MXA2006

The OEX Alternator MXA2006 is a new 12V, 70A unit in Mitsubishi style, supplied as an alternator each for rotating electrical applications. It uses an internal regulator and a single leg mount, with a 6 groove pulley and a 63mm pulley outside diameter.

Key physical details for checking installation include a 58mm mount leg thickness, 10mm pivot hole diameter, M8x1.25 adjusting hole, and 154mm mount centre-to-centre. The unit is listed with pin code IR43 and a clockwise rotation note.

This alternator is identified by part number MXA2006 and is described as suitable for Mitsubishi units. The note also states CCW and references an adaptor to suit HXK-34, HXK-31, and HXK-29, so those details should be checked carefully before ordering.

Key Features

• New alternator, not remanufactured
• 12V, 70A output
• Internal regulator
• Single leg mount
• 6 groove pulley
• Part number MXA2006

Specifications

• Brand: OEX
• Product type: Alternator
• Unit of measure: Each
• Voltage: 12V
• Power rating: 70A
• New / reman: New
• Regulator type: Internal
• Alternator mount: Single leg

Fitment guidance

• HONDA: CIVIC, CIVIC 2000, CIVIC 2001, CIVIC 2002, CIVIC 2003, plus other listed applications

Application and Buying Notes

Use the part number MXA2006 as the first check when comparing alternators. The listed dimensions matter just as much as the voltage and amperage, because this unit is a 12V, 70A alternator with a single leg mount, 63mm pulley outside diameter, and 6 groove pulley section.

Before buying, compare the mount leg thickness of 58mm, pivot hole diameter of 10mm, adjusting hole size of M8x1.25, and mount centre-to-centre of 154mm against the unit already in the vehicle. Those measurements are the best guide for confirming whether the bracket and alignment match.

The note on this alternator says CCW and mentions an adaptor to suit HXK-34, HXK-31, and HXK-29. That makes it important to confirm the pulley rotation, connector detail, and any adaptor requirement before installation, especially where the original unit has been changed previously.

Although the unit is described as Mitsubishi style and suitable for Mitsubishi applications, the only firm identifier here is MXA2006. If the existing alternator has been replaced before, check the part number, mounting style, pulley grooves, and regulator type rather than relying on appearance alone.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number MXA2006 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type ALTERNATOR, Unit of Measure EACH, Warranty 3yr Passenger 1yr Commercial, Mount Leg Thickness 58mm, Pivot Hole Diameter 10, Pulley Outside Diameter 63mm, Regulator Type Internal, Voltage 12, Alternator Mount Single Leg, New / Reman. New.

Additional published details for cross-checking include Product Group 2 ALTERNATORS, Part No. MXA2006, Brand OEX, Description OEX Alternator 12V 70A Mitsubishi Style, Adjusting Hole Diameter M8x1.25, Pin Code IR43, Power Rating (Amp) 70, Pulley Section 6 Groove, Suits Unit Make Mitsubishi.

OEX Alternator 12V 70A Mitsubishi Style. Part number MXA2006 should be checked first. Listed voltage is 12. Listed output rating is 70. These details form the core reference points used by parts interpreters when confirming the correct replacement.

Mount style is Single Leg. Regulator type is Internal. Pulley configuration is 6 Groove. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.

For part number MXA2006, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a alternator in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 and output 70 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Compatibility note: Confirm compatibility by matching part number MXA2006, the Mitsubishi style application, and the listed mounting and pulley details against the vehicle or existing alternator before purchase.

FAQ

What is the part number for this alternator?

The part number is MXA2006. For this listing, part number MXA2006 is the main reference point. Listed voltage is 12. Listed output rating is 70. Published fitment references include HONDA CIVIC, HONDA CIVIC 2000, HONDA CIVIC 2001. These details should still be checked against the original unit before ordering.

Is this alternator new or remanufactured?

It is listed as new. For this listing, part number MXA2006 is the main reference point. Listed voltage is 12. Listed output rating is 70. Published fitment references include HONDA CIVIC, HONDA CIVIC 2000, HONDA CIVIC 2001. These details should still be checked against the original unit before ordering.

What voltage and amperage does it have?

It is a 12V alternator rated at 70A. For this listing, part number MXA2006 is the main reference point. Listed voltage is 12. Listed output rating is 70. Published fitment references include HONDA CIVIC, HONDA CIVIC 2000, HONDA CIVIC 2001. These details should still be checked against the original unit before ordering.

What type of regulator does it use?

It has an internal regulator. For this listing, part number MXA2006 is the main reference point. Listed voltage is 12. Listed output rating is 70. Published fitment references include HONDA CIVIC, HONDA CIVIC 2000, HONDA CIVIC 2001. These details should still be checked against the original unit before ordering.

What mounting and pulley details are listed?

It has a single leg mount, 58mm mount leg thickness, 10mm pivot hole diameter, M8x1.25 adjusting hole, 154mm mount centre-to-centre, and a 6 groove pulley with a 63mm outside diameter. For this listing, part number MXA2006 is the main reference point. Listed voltage is 12. Listed output rating is 70. Published fitment references include HONDA CIVIC, HONDA CIVIC 2000, HONDA CIVIC 2001. These details should still be checked against the original unit before ordering.

What should I check before ordering?

Check the part number MXA2006, the Mitsubishi style application, the listed mounting measurements, pulley groove count, and the CCW note with adaptor reference to HXK-34, HXK-31, and HXK-29. For this listing, part number MXA2006 is the main reference point. Listed voltage is 12. Listed output rating is 70. Published fitment references include HONDA CIVIC, HONDA CIVIC 2000, HONDA CIVIC 2001. These details should still be checked against the original unit before ordering.