OEX Alternator 12V 95A Denso Style DXA574

The OEX Alternator DXA574 is a new 12V, 95A unit in Denso style, supplied as a single leg alternator with an internal regulator. It is listed with a 6 groove pulley measuring 65mm outside diameter, and the mounting dimensions given are 57mm mount leg thickness, 153mm mount centre to centre, a 10mm pivot hole and a 9mm adjusting hole.

This alternator is identified as a Denso-style replacement and is marked for Denso applications. If you are comparing units, the part number DXA574, the 12V system rating and the 95 amp output are the key identifiers to match before purchase. The unit weight is listed at 5.4kg.

OEX describes its products as being sourced from market leading original equipment manufacturers and aftermarket suppliers, with factories that are ISO9001 certified to support engineering, testing and quality control procedures. This alternator is new, sold each, and carries a 3 year passenger / 1 year commercial warranty.

Key Features

• 12V alternator with 95 amp output
• Denso style replacement
• Internal regulator
• Single leg alternator mount
• 6 groove pulley, 65mm outside diameter
• New unit supplied each

Specifications

• Brand: OEX
• Product type: Alternator
• Part No.: DXA574
• Voltage: 12V
• Power rating: 95A
• Regulator type: Internal
• Alternator mount: Single leg
• Pulley section: 6 groove

Fitment guidance

• Supported fitment groups include Honda Accord, with sample applications showing Accord model years 1989 through 2000.
• Fitment data also lists Honda Odyssey and Honda Prelude among the supported makes/models.
• Confirm the existing alternator matches the Denso style, single leg mount, 12V system, 95A output and the listed pulley and mounting dimensions before ordering.

Application and Buying Notes

Before you buy, check the part number DXA574 against the alternator you are replacing, then compare the physical details: 12V, 95A, internal regulator, single leg mount, 6 groove pulley, 65mm pulley outside diameter, 57mm mount leg thickness, 153mm mount centre to centre, 10mm pivot hole and 9mm adjusting hole. Those are the most reliable checkpoints for a Denso-style replacement.

The fitment information supplied is specific to Honda applications, with Accord shown across model years 1989 to 2000 and also listing Odyssey and Prelude. Even where a model family appears in the fitment data, alternators can still vary by engine, build date, connector style or bracket layout, so a visual comparison with the removed unit is still important.

This alternator is a new OEX unit, not remanufactured, and it is backed by a 3 year passenger or 1 year commercial warranty. The warranty length is useful, but it does not replace confirmation of the mounting and electrical details. Matching the regulator type, pulley groove count and pin code IR43 can save time and avoid ordering the wrong part.

If you are replacing a failed alternator, it is worth checking the charging system condition as well. A correct alternator should still be matched with sound belts, terminals and wiring, because the listed 95A output assumes the rest of the charging setup is in good order. The 5.4kg weight also gives a useful reference when comparing the old unit to the replacement.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number DXA574 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type ALTERNATOR, Unit of Measure EACH, Warranty 3yr Passenger 1yr Commercial, Mount Leg Thickness 57mm, Pivot Hole Diameter 10, Pulley Outside Diameter 65mm, Regulator Type Internal, Voltage 12, Mount Cnt to Cnt 153mm, Weight 5.4kg.

Additional published details for cross-checking include Product Group 1 ROTATING ELECTRICAL, Part No. DXA574, Brand OEX, Description OEX Alternator 12V 95A Denso Style, Adjusting Hole Diameter 9, Pin Code IR43, Power Rating (Amp) 95, Pulley Section 6 Groove, Suits Unit Make Denso, Alternator Mount Single Leg.

OEX Alternator 12V 95A Denso Style. Part number DXA574 should be checked first. Listed voltage is 12. Listed output rating is 95. These details form the core reference points used by parts interpreters when confirming the correct replacement.

Mount style is Single Leg. Regulator type is Internal. Pulley configuration is 6 Groove. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.

For part number DXA574, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a alternator in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 and output 95 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include HONDA ACCORD, HONDA ACCORD 1989, HONDA ACCORD 1990, HONDA ACCORD 1992. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

Compatibility note: Confirm fitment using the part number DXA574 and the application details above. Do not rely on the vehicle model alone; match the 12V, 95A Denso-style configuration, single leg mount, 6 groove pulley and the listed mounting measurements against the original unit before ordering.

FAQ

What is the part number for this alternator?

The part number is DXA574.

What voltage and output does it have?

It is a 12V alternator with a 95 amp power rating.

Is this a new or remanufactured unit?

It is listed as new.

What type of regulator does it use?

It has an internal regulator.

What pulley details are listed?

It has a 6 groove pulley with a 65mm outside diameter.

What vehicles are shown in the fitment data?

The supplied fitment data lists Honda Accord, Honda Odyssey and Honda Prelude, with Honda Accord sample applications shown from 1989 through 2000.