OEX Alternator 12V 60A Mitsubishi Style MXA248

The OEX Alternator MXA248 is a new 12V, 60A unit in Mitsubishi style, sold as each. It uses an internal regulator, twin leg alternator mount, 68mm inside mounting legs, a 10mm pivot hole and an M8x1.25 adjusting hole.

It is listed with a pulley outside diameter of 72mm and a pulley section A profile. The note supplied for this unit says it may require the original pulley and has an R terminal, so those details should be checked against the vehicle and the removed alternator before fitting.

This alternator suits Mitsubishi units and is also shown against selected Ford and Mazda applications in the fitment data provided. Because alternator mount dimensions, pulley setup and terminal arrangement matter, the part number MXA248 and the measured mounting points should be confirmed before purchase.

Key Features

• New alternator
• 12V system
• 60 amp output
• Internal regulator
• Twin leg mount
• Mitsubishi style

Specifications

• Brand: OEX
• Part number: MXA248
• Type: Alternator
• Power rating: 60A
• Voltage: 12V
• New / remanufactured: New
• Alternator mount: Twin leg
• Inside mounting legs: 68mm

Verified fitment references

• Mitsubishi
• Mitsubishi Sigma 1982 to 1985
• Ford Courier 1989 to 1999
• Mazda B-Series 1987 to 1997

Application and Buying Notes

Check the old alternator closely against MXA248 before ordering. The critical identifiers here are the 12V, 60A specification, twin leg mount, 68mm inside mounting legs, 10mm pivot hole, M8x1.25 adjusting hole and 72mm pulley outside diameter. If any of those points differ on the unit already fitted, the replacement may not be suitable even if the vehicle brand appears in the fitment list.

The note that this alternator may require the original pulley is important. If your existing pulley setup is different, you may need to transfer the original pulley rather than assume the supplied arrangement will match. The listing also states it has an R terminal, so terminal style should be compared with the vehicle wiring before fitting.

Fitment data supplied for this part includes Mitsubishi Sigma 1982 to 1985, Ford Courier 1989 to 1999 and Mazda B-Series 1987 to 1997. Those applications are useful as a guide, but alternator fit can still vary with engine, bracket and charging system setup. Matching the part number MXA248 and the measured mount points is the safest way to confirm the correct part.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number MXA248 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type ALTERNATOR, Unit of Measure EACH, Warranty 3yr Passenger 1yr Commercial, Inside Mounting Legs 68mm, Pivot Hole Diameter 10, Pulley Outside Diameter 72mm, Regulator Type Internal, Voltage 12, Alternator Mount Twin Leg, New / Reman. New.

Additional published details for cross-checking include Product Group 2 ALTERNATORS, Part No. MXA248, Brand OEX, Description OEX Alternator 12V 60A Mitsubishi Style, Adjusting Hole Diameter M8x1.25, Pin Code IR49, Power Rating (Amp) 60, Pulley Section A, Suits Unit Make Mitsubishi.

OEX Alternator 12V 60A Mitsubishi Style. Part number MXA248 should be checked first. Listed voltage is 12. Listed output rating is 60. These details form the core reference points used by parts interpreters when confirming the correct replacement.

Mount style is Twin Leg. Regulator type is Internal. Pulley configuration is A. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.

For part number MXA248, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a alternator in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 and output 60 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include FORD COURIER, FORD COURIER 1989, FORD COURIER 1990, FORD COURIER 1991, MAZDA B-SERIES, MAZDA B-SERIES 1987. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

Compatibility note: Please confirm compatibility by checking part number MXA248, the 12V 60A specification, twin leg mount dimensions, pulley setup and terminal arrangement against the original alternator and vehicle application details before ordering.

FAQ

What is the part number for this alternator?

The part number is MXA248. For this listing, part number MXA248 is the main reference point. Listed voltage is 12. Listed output rating is 60. Published fitment references include FORD COURIER, FORD COURIER 1989, FORD COURIER 1990. These details should still be checked against the original unit before ordering.

Is this alternator new or remanufactured?

It is listed as new. For this listing, part number MXA248 is the main reference point. Listed voltage is 12. Listed output rating is 60. Published fitment references include FORD COURIER, FORD COURIER 1989, FORD COURIER 1990. These details should still be checked against the original unit before ordering.

What voltage and output does it have?

It is a 12V alternator with a 60A power rating. For this listing, part number MXA248 is the main reference point. Listed voltage is 12. Listed output rating is 60. Published fitment references include FORD COURIER, FORD COURIER 1989, FORD COURIER 1990. These details should still be checked against the original unit before ordering.

Does it have an internal regulator?

Yes. The regulator type is listed as internal. For this listing, part number MXA248 is the main reference point. Listed voltage is 12. Listed output rating is 60. Published fitment references include FORD COURIER, FORD COURIER 1989, FORD COURIER 1990. These details should still be checked against the original unit before ordering.

What mounting details are listed?

The listing shows a twin leg alternator mount, 68mm inside mounting legs, a 10mm pivot hole and an M8x1.25 adjusting hole. For this listing, part number MXA248 is the main reference point. Listed voltage is 12. Listed output rating is 60. Published fitment references include FORD COURIER, FORD COURIER 1989, FORD COURIER 1990. These details should still be checked against the original unit before ordering.

Are any fitment notes supplied?

Yes. The note says it may require the original pulley and has an R terminal. Fitment references also include Mitsubishi Sigma 1982 to 1985, Ford Courier 1989 to 1999 and Mazda B-Series 1987 to 1997. For this listing, part number MXA248 is the main reference point. Listed voltage is 12. Listed output rating is 60. Published fitment references include FORD COURIER, FORD COURIER 1989, FORD COURIER 1990. These details should still be checked against the original unit before ordering.