OEX Starter Motor 12V 10 Tooth CW Mitsubishi Style MXS9612

The OEX starter motor MXS9612 is a new 12V unit with clockwise rotation, a 10 tooth pinion and a 2kW power rating. It is listed as Mitsubishi style and suits Mitsubishi applications where the starter mounting and electrical requirements match the measured specifications.

This starter motor uses a 2 hole mount type with 105mm mount centres, an 82mm flange diameter and 13mm mount hole diameter. Those dimensions matter when checking alignment and housing compatibility, especially if the original starter has a different flange or bolt pattern.

The pinion diameter is 40mm and the pinion at rest measures 34mm. It is designed as a dry clutch starter motor, supplied new, and backed by a 3 year passenger / 1 year commercial warranty, which gives you a clear service context before fitting.

Key Features

• 12V starter motor
• 10 tooth pinion
• Clockwise rotation
• New unit
• 2 hole mount type
• Mitsubishi style application

Specifications

• Part number: MXS9612
• Brand: OEX
• Product type: Starter Motor
• Voltage: 12V
• Power rating: 2kW
• Rotation: CW
• Number of teeth: 10
• Pinion diameter: 40mm

Fitment guidance

• ONAN: DL3, DL3 1987, DL3 1988, DL3 1989, DL3 1990, plus other listed applications

Application and Buying Notes

Check the part number MXS9612 first, then compare the 12V rating, 10 tooth pinion, clockwise rotation and 2 hole mount type against the existing starter motor. Those four points are the fastest way to rule in or rule out a match before you go further.

The mounting measurements are just as important as the electrical details. This unit has 105mm mount centres, an 82mm flange diameter and 13mm mount hole diameter, so the starter should physically sit and bolt up the same way as the original unit only if those dimensions align.

The pinion measurements also deserve attention because the starter must engage the ring gear correctly. With a 40mm pinion diameter and 34mm pinion at rest, this unit is intended to be matched carefully to the application rather than treated as a universal fitment.

Although the listing states Mitsubishi style and suits Mitsubishi, that is not the same as confirming every Mitsubishi application. Always compare the old starter, the vehicle or equipment details, and the fitted unit’s measurements before ordering, especially where the original part has been replaced previously.

If you are replacing a starter in a commercial application, note the warranty difference: 3 years passenger and 1 year commercial. Keep the old unit and check the housing, gear engagement and connectors before installation so any mismatch is picked up before the job is finished.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number MXS9612 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty 3yr Passenger 1yr Commercial, Mount Centres A 105mm, Number of Teeth 10, Pinion Diameter 40mm, Rotation CW, Voltage 12, New / Reman. New, Wet / Dry Clutch Dry.

Additional published details for cross-checking include Product Group 1 ROTATING ELECTRICAL, Part No. MXS9612, Brand OEX, Description OEX Starter Motor 12V 10Th CW Mitsubishi Style, Flange Diameter 82mm, Mount Hole Diameter 13, Pinion at Rest 34mm, Power Rating 2kW, Suits Unit Make Mitsubishi, Item Type Starter Motor.

OEX Starter Motor 12V 10Th CW Mitsubishi Style. Part number MXS9612 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number MXS9612, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Compatibility note: Confirm fitment by matching part number MXS9612, 12V specification, clockwise rotation, 10 tooth pinion, 2 hole mount type and the listed mounting measurements to the existing starter and application details before purchase.

FAQ

What is the part number for this starter motor?

The part number is MXS9612. For this listing, part number MXS9612 is the main reference point. Listed voltage is 12. Published fitment references include ONAN DL3, ONAN DL3 1987, ONAN DL3 1988. These details should still be checked against the original unit before ordering.

Is this a 12V starter motor?

Yes. The listed voltage is 12V. For this listing, part number MXS9612 is the main reference point. Listed voltage is 12. Published fitment references include ONAN DL3, ONAN DL3 1987, ONAN DL3 1988. These details should still be checked against the original unit before ordering.

What direction does it rotate?

It is listed as clockwise rotation, shown as CW. For this listing, part number MXS9612 is the main reference point. Listed voltage is 12. Published fitment references include ONAN DL3, ONAN DL3 1987, ONAN DL3 1988. These details should still be checked against the original unit before ordering.

How many teeth does the pinion have?

The pinion has 10 teeth. For this listing, part number MXS9612 is the main reference point. Listed voltage is 12. Published fitment references include ONAN DL3, ONAN DL3 1987, ONAN DL3 1988. These details should still be checked against the original unit before ordering.

What mounting details are listed?

It has a 2 hole starter mount type, 105mm mount centres, an 82mm flange diameter and 13mm mount hole diameter. For this listing, part number MXS9612 is the main reference point. Listed voltage is 12. Published fitment references include ONAN DL3, ONAN DL3 1987, ONAN DL3 1988. These details should still be checked against the original unit before ordering.

What warranty is listed?

The warranty is 3 years for passenger use and 1 year for commercial use. For this listing, part number MXS9612 is the main reference point. Listed voltage is 12. Published fitment references include ONAN DL3, ONAN DL3 1987, ONAN DL3 1988. These details should still be checked against the original unit before ordering.