OEX Starter Motor 12V 10T CW Lucas Style LXS9305

The OEX starter motor listed here is a 12V unit with 10 teeth, clockwise rotation, and a 2.2kW power rating. It is identified as part number LXS9305 and is described as Lucas style, with the unit make noted as Lucas and the model note marked M45.

This starter motor is a new unit, supplied each, with a one year warranty. Key physical details include a 3 hole starter mount type, mount centres of 127mm and 90mm, a 89mm flange diameter, and an overall length of 309mm.

Additional measured details include a 40mm pinion diameter, 20mm pinion at rest, 10mm mount hole diameter, and a weight of 11.8kg. Those figures matter when comparing against an existing starter or confirming space, mounting pattern, and engagement setup before ordering.

Key Features

• 12V starter motor
• 10 tooth pinion
• Clockwise rotation
• 2.2kW power rating
• Lucas style / suits unit make Lucas
• New unit

Specifications

• Part number: LXS9305
• Brand: OEX
• Product type: Starter motor
• Voltage: 12V
• Rotation: CW
• Number of teeth: 10
• Power rating: 2.2kW
• Starter mount type: 3 hole

Fitment guidance

• Listed fitment includes CASE and CASE H25B.
• Sample application data includes CASE H25B and CASE H25B 1970.

Application and Buying Notes

Before ordering, compare the part number LXS9305, the 12V rating, and the 10 tooth clockwise configuration with the unit already fitted to the machine. The most useful physical checks are the 3 hole mounting pattern, mount centres of 127mm and 90mm, and the 89mm flange diameter.

The 2.2kW power rating and 309mm overall length are important when checking that the replacement matches the original starter’s electrical and physical layout. The 40mm pinion diameter and 20mm pinion at rest are also worth confirming if you are replacing a worn or non-original unit.

Because starter motors can look similar while differing in mount centres, pinion layout, or rotation, it is best to verify the application against the existing part and machine details rather than relying on appearance alone. The listed wet / dry clutch note is dry, so that detail should also be checked against the original setup where relevant.

If your machine is a CASE or CASE H25B application, use the application details carefully alongside the measured specifications. The sample references include CASE H25B and CASE H25B 1970, but final confirmation should still be made with the part number, mounting dimensions, and tooth count before purchase.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number LXS9305 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty One Year, Mount Centres A 127mm, Mount Centres C 90mm, Number of Teeth 10, Pinion at Rest 20mm, Power Rating 2.2kW, Suits Unit Make Lucas, Note M45.

Additional published details for cross-checking include Starter Mount Type 3 Hole, Weight 11.8kg, Product Group 1 ROTATING ELECTRICAL, Part No. LXS9305, Brand OEX, Description OEX Starter Motor 12V 10Th CW Lucas Style, Flange Diameter 89mm, Mount Centres B 90mm, Mount Hole Diameter 10, Overall Length 309mm.

OEX Starter Motor 12V 10Th CW Lucas Style. Part number LXS9305 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number LXS9305, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include CASE H25B, CASE H25B 1970. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

Compatibility note: Confirm compatibility by matching part number LXS9305, the 12V 10 tooth CW specification, and the measured mounting and pinion details against the original starter and application.

FAQ

What is the part number for this starter motor?

The part number is LXS9305. For this listing, part number LXS9305 is the main reference point. Listed voltage is 12. Published fitment references include CASE H25B, CASE H25B 1970. These details should still be checked against the original unit before ordering.

Is this a new or remanufactured starter motor?

It is listed as new. For this listing, part number LXS9305 is the main reference point. Listed voltage is 12. Published fitment references include CASE H25B, CASE H25B 1970. These details should still be checked against the original unit before ordering.

What voltage and rotation does it have?

It is a 12V starter motor with clockwise rotation. For this listing, part number LXS9305 is the main reference point. Listed voltage is 12. Published fitment references include CASE H25B, CASE H25B 1970. These details should still be checked against the original unit before ordering.

How many teeth does the pinion have?

The pinion has 10 teeth. For this listing, part number LXS9305 is the main reference point. Listed voltage is 12. Published fitment references include CASE H25B, CASE H25B 1970. These details should still be checked against the original unit before ordering.

What are the main mounting dimensions?

The starter has a 3 hole mount type, with mount centres A of 127mm, and mount centres B and C both listed at 90mm. The flange diameter is 89mm. For this listing, part number LXS9305 is the main reference point. Listed voltage is 12. Published fitment references include CASE H25B, CASE H25B 1970. These details should still be checked against the original unit before ordering.

What fitment information is listed?

Listed fitment includes CASE and CASE H25B, with sample application references for CASE H25B and CASE H25B 1970. The part number and measured dimensions should still be confirmed against the original unit before ordering. For this listing, part number LXS9305 is the main reference point. Listed voltage is 12. Published fitment references include CASE H25B, CASE H25B 1970. These details should still be checked against the original unit before ordering.