OEX Starter Motor 12V 11T CW Denso Style DXS446

The OEX DXS446 is a 12V starter motor in Denso style configuration, with 11 teeth, clockwise rotation and a 2-hole starter mount. Key dimensions include 148mm mount centres, a 105mm flange diameter, 295mm overall length and a 40mm pinion diameter, so it is important to compare the physical pattern as well as the part number before ordering.

This unit is a new starter motor, not remanufactured, and it is listed with a 2.5kW power rating and a dry clutch arrangement. The pinion at rest measures 13mm, and the mount hole diameter is M14 / 15, which are useful checks when matching the starter to the vehicle application.

OEX identifies this product as suitable for Denso unit make applications, and the listed fitment data includes Daihatsu Delta and Toyota applications such as Celica, Coaster, Dyna, Dyna 200 and Land Cruiser. Even where the vehicle family appears familiar, starter motors still need confirmation against the exact engine and mounting arrangement.

For buying confidence, the most useful identifiers here are part number DXS446, 12V voltage, 11-tooth pinion, clockwise rotation and the Denso style mounting pattern. These details should be matched carefully against the removed unit or the vehicle application before the job is booked in.

Key Features

• OEX starter motor, part number DXS446
• 12V electrical system
• 11-tooth pinion
• Clockwise rotation
• 2-hole starter mount
• 2.5kW power rating

Specifications

• Voltage: 12V
• Power rating: 2.5kW
• Rotation: CW
• Number of teeth: 11
• Suits unit make: Denso
• Starter mount type: 2 hole
• Mount centres A: 148mm
• Flange diameter: 105mm

Listed fitment applications

• Daihatsu Delta
• Daihatsu Delta Wide
• Toyota Celica
• Toyota Coaster
• Toyota Dyna
• Toyota Dyna 200
• Toyota Land Cruiser

Application and Buying Notes

Starter motors are commonly matched first by part number, then by the mounting pattern and electrical specifications. For the OEX DXS446, the important checkpoints are 12V, 11 teeth, clockwise rotation, Denso style, 2-hole mount and 148mm mount centres. If any one of those details differs from the unit being replaced, the starter may not be the correct choice.

The physical dimensions are there for a reason. A 105mm flange diameter, 295mm overall length, 40mm pinion diameter and M14 / 15 mount hole diameter provide practical reference points when comparing against the existing starter. The 13mm pinion at rest is another useful detail when checking clearance and position against the removed part.

The listed fitment covers Daihatsu Delta and Toyota models including Celica, Coaster, Dyna, Dyna 200 and Land Cruiser, but that still leaves room for variation by engine and production details. Use the vehicle application as a guide only, then confirm the starter against the original unit, mounting shape and electrical requirements before purchase.

Because this is a new 2.5kW starter motor, it is a suitable option where the existing unit is worn or failing, provided the application matches. The warranty listed is 3 years for passenger use and 1 year for commercial use, so it is worth keeping your invoice and confirming the intended use category at the time of fitting.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number DXS446 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty 3yr Passenger 1yr Commercial, Mount Centres A 148mm, Number of Teeth 11, Pinion at Rest 13mm, Power Rating 2.5kW, Suits Unit Make Denso, New / Reman. New, Wet / Dry Clutch Dry.

Additional published details for cross-checking include Product Group 2 STARTER MOTORS, Part No. DXS446, Brand OEX, Description OEX Starter Motor 12V 11Th CW Denso Style, Flange Diameter 105mm, Mount Hole Diameter M14 / 15, Overall Length 295mm, Pinion Diameter 40mm, Rotation CW.

OEX Starter Motor 12V 11Th CW Denso Style. Part number DXS446 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number DXS446, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include DAIHATSU DELTA, DAIHATSU DELTA 1983, DAIHATSU DELTA 1984, DAIHATSU DELTA 1985, TOYOTA CELICA, TOYOTA CELICA 1999. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

Compatibility note: Confirm compatibility by matching part number DXS446, 12V voltage, 11-tooth clockwise Denso style configuration, 2-hole mount and the listed mounting dimensions against the vehicle and the original starter before ordering.

FAQ

What is the part number for this starter motor?

The part number is DXS446. For this listing, part number DXS446 is the main reference point. Listed voltage is 12. Published fitment references include DAIHATSU DELTA, DAIHATSU DELTA 1983, DAIHATSU DELTA 1984. These details should still be checked against the original unit before ordering.

What voltage is the OEX DXS446 starter motor?

It is a 12V starter motor. For this listing, part number DXS446 is the main reference point. Listed voltage is 12. Published fitment references include DAIHATSU DELTA, DAIHATSU DELTA 1983, DAIHATSU DELTA 1984. These details should still be checked against the original unit before ordering.

How many teeth does the pinion have?

The pinion has 11 teeth. For this listing, part number DXS446 is the main reference point. Listed voltage is 12. Published fitment references include DAIHATSU DELTA, DAIHATSU DELTA 1983, DAIHATSU DELTA 1984. These details should still be checked against the original unit before ordering.

What rotation does this starter motor use?

It is clockwise rotation, shown as CW. For this listing, part number DXS446 is the main reference point. Listed voltage is 12. Published fitment references include DAIHATSU DELTA, DAIHATSU DELTA 1983, DAIHATSU DELTA 1984. These details should still be checked against the original unit before ordering.

Is this starter motor new or remanufactured?

It is a new starter motor. For this listing, part number DXS446 is the main reference point. Listed voltage is 12. Published fitment references include DAIHATSU DELTA, DAIHATSU DELTA 1983, DAIHATSU DELTA 1984. These details should still be checked against the original unit before ordering.

What vehicles are listed in the fitment data?

The listed fitment includes Daihatsu Delta and Toyota Celica, Coaster, Dyna, Dyna 200 and Land Cruiser applications. For this listing, part number DXS446 is the main reference point. Listed voltage is 12. Published fitment references include DAIHATSU DELTA, DAIHATSU DELTA 1983, DAIHATSU DELTA 1984. These details should still be checked against the original unit before ordering.