OEX Starter Motor 12V 9TH CW Delco Style DXS486

The OEX Starter Motor DXS486 is a 12V, clockwise rotation starter in Delco style, supplied new and listed as a 9 tooth unit. It is a 2 hole starter motor with 105mm mount centres, an 8mm mount hole diameter, and a 68mm flange diameter.

Key dimensions on this unit include an overall length of 183mm, a nose cone length of 53mm, and a pinion diameter of 25mm. The pinion at rest measures 18mm, and the starter is rated at .8kW, which makes these dimensions important when checking the unit against the original starter before ordering.

This starter is noted for manual transmission use and for a dry clutch application. Fitment references supplied for this part include Bedford CF, Daewoo Cielo, Daewoo Espero, Holden Barina and Opel Corsa, so it is worth checking the exact application details and part number DXS486 before purchase.

Key Features

• 12V starter motor
• Clockwise rotation (CW)
• 9 tooth pinion
• 2 hole starter mount
• New unit
• For manual transmission

Specifications

• Voltage: 12V
• Power rating: .8kW
• Rotation: CW
• Number of teeth: 9
• Starter mount type: 2 hole
• Mount centres A: 105mm
• Mount hole diameter: 8mm
• Flange diameter: 68mm

Confirmed fitment references

• Bedford CF
• Daewoo Cielo
• Daewoo Espero
• Holden Barina
• Opel Corsa
• Daewoo 1.5i

Application and Buying Notes

When comparing this starter to the one being replaced, check the part number DXS486 first, then confirm the physical details: 12V, clockwise rotation, 9 teeth, 2 hole mount, 105mm mount centres, and a 68mm flange diameter. Those measurements are the most practical way to avoid ordering a starter that looks similar but does not bolt up or engage correctly.

The note for manual transmission and dry clutch use matters. Even where a vehicle make appears in the fitment references, the transmission and clutch arrangement still need to match the application. A starter for a manual setup should not be assumed correct for another transmission type just because the vehicle badge is the same.

The listed Delco style and suits unit make of Delco are useful compatibility checkpoints, but they do not replace a direct comparison to the original starter. The overall length of 183mm, nose cone length of 53mm, pinion diameter of 25mm, and pinion at rest of 18mm are all practical dimensions to verify if you are working from a removed unit.

This starter is supplied as a new OEX unit and carries a 3 year passenger / 1 year commercial warranty. Warranty terms do not confirm fitment, so it is still important to check the starter position, mounting pattern, and drive engagement before fitting the part. If the vehicle is being used commercially, the shorter warranty period should be kept in mind when purchasing.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number DXS486 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty 3yr Passenger 1yr Commercial, Mount Centres A 105mm, Nose Cone Length 53mm, Overall Length 183mm, Pinion Diameter 25mm, Rotation CW, Voltage 12, Item Type Starter Motor.

Additional published details for cross-checking include Starter Mount Type 2 Hole, Weight 3.6kg, Product Group 1 ROTATING ELECTRICAL, Part No. DXS486, Brand OEX, Description OEX Starter Motor 12V 9Th CW Delco Style, Flange Diameter 68mm, Mount Hole Diameter 8, Number of Teeth 9, Pinion at Rest 18mm.

OEX Starter Motor 12V 9Th CW Delco Style. Part number DXS486 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number DXS486, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include BEDFORD CF, BEDFORD CF 1985, BEDFORD CF 1986, BEDFORD CF 1987, DAEWOO 1.5I, DAEWOO 1.5I 1994. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

Compatibility note: Please confirm fitment by matching part number DXS486, the 12V clockwise configuration, 9 tooth pinion, 2 hole mount, and the listed dimensions against the original starter and vehicle application details before ordering.

FAQ

What is the part number for this starter motor?

The part number listed for this OEX starter motor is DXS486. For this listing, part number DXS486 is the main reference point. Listed voltage is 12. Published fitment references include BEDFORD CF, BEDFORD CF 1985, BEDFORD CF 1986. These details should still be checked against the original unit before ordering.

Is this starter motor new or remanufactured?

It is listed as a new starter motor. For this listing, part number DXS486 is the main reference point. Listed voltage is 12. Published fitment references include BEDFORD CF, BEDFORD CF 1985, BEDFORD CF 1986. These details should still be checked against the original unit before ordering.

What voltage and rotation does it have?

It is a 12V starter motor with clockwise rotation (CW). For this listing, part number DXS486 is the main reference point. Listed voltage is 12. Published fitment references include BEDFORD CF, BEDFORD CF 1985, BEDFORD CF 1986. These details should still be checked against the original unit before ordering.

How many teeth does the pinion have?

The starter is listed with 9 teeth. For this listing, part number DXS486 is the main reference point. Listed voltage is 12. Published fitment references include BEDFORD CF, BEDFORD CF 1985, BEDFORD CF 1986. These details should still be checked against the original unit before ordering.

What type of mounting does it use?

It uses a 2 hole starter mount, with mount centres of 105mm and mount hole diameter of 8mm. For this listing, part number DXS486 is the main reference point. Listed voltage is 12. Published fitment references include BEDFORD CF, BEDFORD CF 1985, BEDFORD CF 1986. These details should still be checked against the original unit before ordering.

Which vehicles are referenced for fitment?

Fitment references supplied include Bedford CF, Daewoo Cielo, Daewoo Espero, Holden Barina, Opel Corsa, and Daewoo 1.5i. Final suitability still needs to be confirmed against the specific application details and the original part. For this listing, part number DXS486 is the main reference point. Listed voltage is 12. Published fitment references include BEDFORD CF, BEDFORD CF 1985, BEDFORD CF 1986. These details should still be checked against the original unit before ordering.