OEX Starter Motor 12V 8TH CW Denso Style DXS4025

The OEX Starter Motor DXS4025 is a new 12V starter motor with 8 teeth, clockwise rotation, and a Denso style fitment profile. It is a 2 hole starter motor with an M10 x 1.25 mount hole diameter, 101mm mount centres, and a 70mm flange diameter, so the physical dimensions can be checked before ordering.

Key measurements include a 190mm overall length, 60mm nose cone length, 28mm pinion diameter, and 29mm pinion at rest. The unit is rated at 1kW and weighs 3kg, which makes the key identification points easy to confirm against the existing starter motor.

This starter motor is listed as new and suits Denso unit applications. It is supplied under OEX part number DXS4025 and carries the OEX warranty of 3yr Passenger and 1yr Commercial, which is useful to note when matching the part to the vehicle and duty cycle.

The product sits in the rotating electrical category and is described as a dry clutch starter motor. If you are replacing a failed starter, the safest approach is to compare the part number, tooth count, rotation, mounting pattern, and overall dimensions before purchase.

Key Features

• 12V starter motor
• 8 tooth pinion
• Clockwise rotation
• Denso style application
• 2 hole starter mount
• New unit

Specifications

• Brand: OEX
• Part No.: DXS4025
• Type: Starter Motor
• Voltage: 12V
• Rotation: CW
• Number of Teeth: 8
• Power Rating: 1kW
• Starter Mount Type: 2 Hole

Confirmed application groups

• Holden Cruze
• Hyundai Accent
• Hyundai Excel
• Hyundai Getz
• Kia Rio
• Suzuki Grand Vitara
• Suzuki Ignis
• Suzuki Jimny

Application and Buying Notes

Before ordering, compare the existing starter against the listed DXS4025 measurements: 12V, clockwise rotation, 8 teeth, 2 hole mounting, 101mm mount centres, and a 70mm flange diameter. Those are the most practical checks when the vehicle history is unclear or when another starter has been fitted previously.

The Denso style and Denso unit make are important clues, but they should still be matched against the removed unit rather than assumed from the vehicle alone. A starter motor with the wrong rotation, tooth count, or mounting pattern can appear similar yet still be incorrect for the application.

Pay close attention to the 190mm overall length, 60mm nose cone length, 28mm pinion diameter, and 29mm pinion at rest. These dimensions help confirm whether the new unit will physically sit correctly in the bellhousing and align as intended.

The warranty is 3yr Passenger and 1yr Commercial, which is useful context when selecting the part for private or business use. As with any rotating electrical component, correct diagnosis matters, so check battery condition, charging system output, cables, and earths if the original starter failed unexpectedly.

If the vehicle has had an engine change, transmission swap, or previous electrical repairs, rely on the part number and the mounting details rather than model name alone. Matching DXS4025 and the stated specifications is the most reliable way to avoid a return or a second strip-down.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number DXS4025 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty 3yr Passenger 1yr Commercial, Mount Centres A 101mm, Nose Cone Length 60mm, Overall Length 190mm, Pinion Diameter 28mm, Rotation CW, Voltage 12, New / Reman. New.

Additional published details for cross-checking include Wet / Dry Clutch Dry, Product Group 2 STARTER MOTORS, Part No. DXS4025, Brand OEX, Description OEX Starter Motor 12V 8Th CW Denso Style, Flange Diameter 70mm, Mount Hole Diameter M10 x 1.25, Number of Teeth 8, Pinion at Rest 29mm.

OEX Starter Motor 12V 8Th CW Denso Style. Part number DXS4025 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number DXS4025, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Compatibility note: Confirm fitment by checking the part number DXS4025, the 12V clockwise 8 tooth specification, the 2 hole mount with 101mm centres, and the Denso style application details against the removed starter motor and vehicle requirements.

FAQ

What is the part number for this starter motor?

The part number is DXS4025. For this listing, part number DXS4025 is the main reference point. Listed voltage is 12. Published fitment references include HOLDEN CRUZE, HOLDEN CRUZE 2002, HOLDEN CRUZE 2003. These details should still be checked against the original unit before ordering.

Is this starter motor new or remanufactured?

It is listed as new. For this listing, part number DXS4025 is the main reference point. Listed voltage is 12. Published fitment references include HOLDEN CRUZE, HOLDEN CRUZE 2002, HOLDEN CRUZE 2003. These details should still be checked against the original unit before ordering.

What voltage and rotation does it use?

It is a 12V starter motor with clockwise rotation. For this listing, part number DXS4025 is the main reference point. Listed voltage is 12. Published fitment references include HOLDEN CRUZE, HOLDEN CRUZE 2002, HOLDEN CRUZE 2003. These details should still be checked against the original unit before ordering.

How many teeth does the pinion have?

The pinion has 8 teeth. For this listing, part number DXS4025 is the main reference point. Listed voltage is 12. Published fitment references include HOLDEN CRUZE, HOLDEN CRUZE 2002, HOLDEN CRUZE 2003. These details should still be checked against the original unit before ordering.

What mounting details are listed?

It has a 2 hole starter mount, 101mm mount centres, and an M10 x 1.25 mount hole diameter. For this listing, part number DXS4025 is the main reference point. Listed voltage is 12. Published fitment references include HOLDEN CRUZE, HOLDEN CRUZE 2002, HOLDEN CRUZE 2003. These details should still be checked against the original unit before ordering.

What warranty is listed?

The listed warranty is 3yr Passenger and 1yr Commercial. For this listing, part number DXS4025 is the main reference point. Listed voltage is 12. Published fitment references include HOLDEN CRUZE, HOLDEN CRUZE 2002, HOLDEN CRUZE 2003. These details should still be checked against the original unit before ordering.