OEX Starter Motor 12V 9 Tooth CW Denso Style DXS570

The OEX DXS570 is a new 12V starter motor in Denso style, with clockwise rotation and a 9 tooth pinion. It is listed with a 1.2kW power rating, a 2 hole starter mount type, and a 74mm flange diameter, so it suits applications that match those physical and electrical details.

Key dimensions include 120mm mount centres, M10 / 11 mount hole diameter, 200mm overall length, 29mm pinion diameter, and 14mm pinion at rest. Those measurements are important when comparing against the original starter, especially where clearance, bolt pattern, and engagement depth need to line up exactly.

This unit is supplied as new and weighs 3.42kg. It is part of the OEX rotating electrical range and carries the stated warranty of 3yr passenger and 1yr commercial, which gives a clear reference point for the intended application and usage category.

Key Features

• 12V starter motor
• Clockwise rotation
• 9 tooth pinion
• Denso style unit
• 2 hole starter mount
• New unit

Specifications

• Brand: OEX
• Part No.: DXS570
• Type: Starter Motor
• Voltage: 12V
• Rotation: CW
• Number of teeth: 9
• Power rating: 1.2kW
• Starter mount type: 2 hole

Fitment guidance

• Toyota Corolla
• Toyota Corolla II
• Toyota Echo
• Toyota MR2
• Toyota Porte
• Toyota Ractis
• Toyota Spade
• Toyota Tercel

Application and Buying Notes

Before ordering, compare the part number DXS570 and the physical details on your original starter, including 12V operation, clockwise rotation, 9 teeth, 120mm mount centres, and the 2 hole mounting pattern. These are the most direct checks for avoiding a mismatch when replacing an existing Denso style starter.

The flange diameter is 74mm, the overall length is 200mm, and the pinion diameter is 29mm with 14mm pinion at rest. Those measurements matter when the starter sits tight against the bellhousing or where the pinion position must match the vehicle’s engagement setup.

This starter is listed for Toyota applications including Corolla, Corolla II, Echo, MR2, Porte, Ractis, Spade, Tercel, and Yaris. That is useful as a guide, but the exact engine and year still need to be checked against the part number and the original unit, because model names alone are not enough for a safe match.

The 1.2kW rating indicates the output level of the starter, but the correct fit still depends on the mounting pattern, rotation, tooth count, and pinion dimensions. If your replacement needs to match a Denso style starter and the physical specifications line up, this unit provides a straightforward comparison point.

For commercial use, note the stated 1yr commercial warranty. For passenger use, the stated warranty is 3yr passenger. Keep your purchase records and confirm the application details before fitting, particularly if the vehicle has had previous electrical or engine changes.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number DXS570 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty 3yr Passenger 1yr Commercial, Mount Centres A 120mm, Number of Teeth 9, Pinion at Rest 14mm, Power Rating 1.2kW, Suits Unit Make Denso, Item Type Starter Motor, Starter Mount Type 2 Hole.

Additional published details for cross-checking include Weight 3.42kg, Product Group 1 ROTATING ELECTRICAL, Part No. DXS570, Brand OEX, Description OEX Starter Motor 12V 9Th CW Denso Style, Flange Diameter 74mm, Mount Hole Diameter M10 / 11, Overall Length 200mm, Pinion Diameter 29mm, Rotation CW.

OEX Starter Motor 12V 9Th CW Denso Style. Part number DXS570 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number DXS570, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Compatibility note: Confirm fitment by matching part number DXS570, 12V CW Denso style configuration, 9 tooth count, 2 hole mounting, and all listed dimensions against the original starter and vehicle application before purchase.

FAQ

What is the part number for this starter motor?

The part number is DXS570. For this listing, part number DXS570 is the main reference point. Listed voltage is 12. Published fitment references include TOYOTA COROLLA, TOYOTA COROLLA 2012, TOYOTA COROLLA 2013. These details should still be checked against the original unit before ordering.

Is this starter motor new or remanufactured?

It is listed as new. For this listing, part number DXS570 is the main reference point. Listed voltage is 12. Published fitment references include TOYOTA COROLLA, TOYOTA COROLLA 2012, TOYOTA COROLLA 2013. These details should still be checked against the original unit before ordering.

What voltage and rotation does it use?

It is a 12V starter motor with clockwise rotation. For this listing, part number DXS570 is the main reference point. Listed voltage is 12. Published fitment references include TOYOTA COROLLA, TOYOTA COROLLA 2012, TOYOTA COROLLA 2013. These details should still be checked against the original unit before ordering.

How many teeth does the pinion have?

The pinion has 9 teeth. For this listing, part number DXS570 is the main reference point. Listed voltage is 12. Published fitment references include TOYOTA COROLLA, TOYOTA COROLLA 2012, TOYOTA COROLLA 2013. These details should still be checked against the original unit before ordering.

What are the main mounting dimensions?

It has a 2 hole starter mount type, 120mm mount centres, M10 / 11 mount hole diameter, and a 74mm flange diameter. For this listing, part number DXS570 is the main reference point. Listed voltage is 12. Published fitment references include TOYOTA COROLLA, TOYOTA COROLLA 2012, TOYOTA COROLLA 2013. These details should still be checked against the original unit before ordering.

Which vehicles are listed in the fitment guidance?

The fitment guidance includes Toyota Corolla, Corolla II, Echo, MR2, Porte, Ractis, Spade, Tercel, and Yaris. Exact suitability still needs to be checked against the original starter and part number. For this listing, part number DXS570 is the main reference point. Listed voltage is 12. Published fitment references include TOYOTA COROLLA, TOYOTA COROLLA 2012, TOYOTA COROLLA 2013. These details should still be checked against the original unit before ordering.